hey guys.
my X1 always disconnects from the pc when i try to use the modem
help!!!!
using
bluetooth, usb or WMWifiRouter ?
How do you recognize that the X1 disconnects from the PC? If you refer to the ActiveSync Application, then it's normal that it disconnects from ActiveSync.
By the way: There was a real modem application in the past for WM5 but the X1 uses "Internet Connection Sharing" which works a little bit different. If you start ICS on the X1 it will show up as a network adapter on the PC. You can see it in the network control panel.
Related
Hi!
Has someone a solution / configuration for to get windows working with xda2 as a modem?
i'm pretty sure it works as a bluetooth modem without any software
Using XDA as a modem to your PC
VIA BLUETOOTH CONNECTION & GPRS:
If your PC does not have an integrated Bluetooth connection, you must first install a Bluetooth dongle (USB to Bluetooth) on your PC, with the related software (widcomm or other)
Open on your PC in the Control Panel the Phone and Modem Options
Choose Modems, pick the Bluetooth Modem, then click on Properties
Click on Advanced tab
Type in Extra Initialization commands:
AT+CGDCONT=1,”IP”,”xxx”,””,0,0
where xxx is your internet access point.
Now click on the Bluetooth icon of XDA, and choose Discoverable mode
On your PC:
Click on Bluetooth icon (My Bluetooth places)
Click Bluetooth Setup Wizard.
Choose I want to find a specific Bluetooth device …
After a search period, an icon of your XDA is displayed (usually with your owner’s name): double click for settings
From the Dial-up Networking Links, click on SSA
SSA settings:
Modem: Bluetooth Modem
Number to dial: *99#
User name and password, according to Network provider
Yes it works. Im using my cradle/usb connection though and not bluetooth. I am browsing the net for free and using msn for free!! what I dont get is that why, as im using o2s settings, can i access msn via my laptop using my gprs modem, yet i cant access msn using my xda2. I know they both using the same ports! 8080...bloody weird? Or is there something else which affects the connection to net via laptop than there is connecting to gprs via xda2 connection inbuilt. Any ideas?
Drivers needed
Could please anyone post the drivers to use the HTC Himalaya as a gprs modem on my notebook.
I've lost the T-Mobile CD.
QTEK m100/i mate jam
I have been trying without success for two whole evenings to make this htc device act as a wireless usb modem for my sony viao laptop. I downloaded the USB modem dialler utility that is referred to in the sites, and when I physically connect with the USB cable and turn on the wmodem utility on the qtek then it will connect through GPRS and that is a workable if wirebound solution. However, if I disconnect and close the dieler utility, (which doesnt install, it just exe's everytime you open it) I have to fully reboot the laptop before it will connect again.
Using windows to detect the bluetooth modem results in it spotting 3 bluetooth modems, only one of which is available to "query". Using the Vodafone connect (PC) software, (which works with my old sony ericsson t610), with the newly installed bluetooth modem results in an"AT command not supported" failure message. It does this with or without the GCDCONDetc initialisation string in the modem's advanced settings.
Has anyone got a simple HTC bluetooth modem driver or any better ideas? This is driving me bananas.
Thanks
I tried to use Trinity as a modem and did not manage to make this work.
I connect the usb cable. Start ISharing program on pda. Click conect. Says connected. 3G connection works. However the laptop is not connected to the internet.
Bluetooth also does not work. I can't find a way to create a PAN as they call it.
I would appreciate any suggestions as the manual is not clear on this topic
edit: i start internet sharing on my pda. i choose bluetooth. click connect. it says: Device setup finished. On the PC connect Bluetooth PAN.
On the PC i find my device. Find available services. Double click on 'Network Acces Point on Trinity'. I get a message that the computer is connecting and then an error: The Network Access connection failed: Could not connect to the remote device'
edit2: finally solved it.
I had to enter advanced bluetooth config on laptop. Under 'network access' properties I selected 'allow other devices to create a private network with this device'. Now it works.
hi,
i had the same issue, using bluetooth, but it´s the same, i guess.
you need to connect the pda with the pc, and when you get the connection, you go to the program menu in the pda, and select in the submenu connetions usb/bluettoth pan and connect.
the dial up connectiosn should start.
tell me if suceed.
i start internet sharing on phone. then go on bluetooth->quick connect-> network access -> my phone name. then it works as i mentioned above. but i had to change some properties in my bluetooth configuration to make it work.
The same for me : when I try tu use it as a GPRS modem for my TomTom Rider device, the Rider says that the DUN profile isn't provided as a service by the Trinity !!! Use to work perfectly with my old Magician !!! I'm really disappointed ! Will see if the brand new ROM with GPS feature corrects this...
try to start internet sharing first (in trinity), connect to gprs and then start bluetooth services discovery on tomtom.
I'm not using bluetooth, but trying to use the phone as a modem using USB with a laptop. It works, but is really flaky, so would appreciate some pointers on how to fix the problem.
First thing that I do is connect the phone to my laptop via USB. Activesync starts up on both the laptop and the phone. Then, when I start the Internet Sharing program, the phone stops Activesync and connects to the network. Everything works fine for a while and I am able to surf the net on both the Trinity and the laptop with no problems for a while. The problem is that after a period that can vary from 10 minutes to 1 hours, the laptop loses the internet connection. The phone is still connected to the internet though and I can still surf using the PDA. It's just the laptop that loses the connection.
I have to reboot the laptop and soft reset the Trinity to repeat the process to get internet on the laptop going again.
Any ideas what's causing the problem? I've tried disabling Advanced USB Functionality on the Trinity, but the problem is still there...
Hello!
I tried to connect to internet by bluetooth connection without luck. I created on PC bridged connection and devices are connected by bluetooth. But I cant create network connection from Wizard to PC. I am allways returned to create new connection page. I am using Vanilla edition WM6. Also, when I tap on Interent Sharing nothing happening.
Ok guys....I wanna use the GPRS on my phone for my SOny Vaio LAptop...I have done the hard part.......I have done a successful connection.....The modem is connected.....As in Vista it shows at the bottom connected to a local network....Then I run the connect 2 the internet wizard....I dont know the dial up number for the HTC Touch which will connect me to the internet....I guess there is a dailup no which connects to the active profile.....Can anyone help me find the number.....??.plzz help me guys..
If you are using Windows Mobile 6.1 you can use Internet Connection Sharing through bluetooth connection. The phone will act as a bluetooth access point for your PC (also working through USB). It will use your phone regular data connection and will not need the special data settings. On the touch it is activated either in Comm Manager - internet sharing or WM 6.1 connection settings internet connection sharing.
Hi,
I have 2 questions:
1) How to use (to share) the internet connection (3G) established by my blackstone on my Laptop, using bluetooth? On the blackstone, the screen for internet sharing only appears when I connect the mobile to the laptop with an USB cable. At that time it's possible to chose the type of connection USB or bluetooth. My question: is there a way to get this screen (internet sharing) on the mobile without pluggin the USB cable in order to use directly the bluetooth connection?
2) In the same way I would like to use (to share) the 3G internet connection setup by my blackstone on my HTC Kaiser (WM6.0) also using bluetooth.
Is it possible? Someone could explain the procedure?
The reason to do that, is to use Skype. If I try to use Skype on my blackstone, it's refused by the Telecom Operator. When I use Skype on my laptop sharing an 3G internet connection, it's allowed... I suppose it would be allowed too if I run Skype on my Kaiser sharing the 3G connection of my blackstone...
I know that is possible to do it with WiFi. Bluetooth would be better...
Many thanks for your answers.
Franck
In the programs listing you should have a program called "internet sharing" which allows you to select USB or Bluetooth. I haven't used the bluetooth setting but it has a settings option so should be able to do what you want.
Yeah i just select Bluetooth rather than USB connection and press connect.
Pair your laptop to your phone first then press connect, then on your laptop, click the taskbar icon and click quick connect > Network Access and then select your phone.
Thank you all for your helpful answers. I succeeded to connect my blackstone to my laptop using bluetooth and sharing the 3G internet connection.
However, I didn't succeed to share the 3 G internet connection setup by my blackstone on my HTC Kaiser (see my point 2 in my previous post). I succeeded to establish a Bluetooth connection between them, but I never succeeded to share the connection. (The Kaiser runs on WM6.0).
Any idea?
Many thanks for your help.
Franck,