hw reset - Wing, P4350 General

does somebody know if any program can make hw reset without pressing the sw keys. my sw keys are not working well.
thanks.

Related

flashing mode

Guys,
I can't seem to reboot to flashing mode/bootloader on my O2 mini. I did try pressing down Power + Action buttons plus soft reset simultaneously.
Anybody please help me... i am upgrading to WM2005.
Thanks.
rgds,
Ronny
Hold the camera and power buttons.
Make sure they're held down right.
Now do a soft reset.

XDA II Mini

Can someone please help me I am trying to get into the boot loader but every time I press the middle button + power + soft reset it does a hard reset so I am unable to upgrade it.
Do not know if this will help or not
Details are:
PM10A
FCC ID: NM8MAGICIAN
re
I think u should press camera button instead middle button
Thanxs I have tried that also everyone combination I have tried sems to do a hard reset?

Urgent plz

GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
abiis said:
GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
Click to expand...
Click to collapse
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Fallen Spartan said:
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Click to expand...
Click to collapse
good day
* i am using original rom 1.14.421.5 (25590) wwe
*no didnt flash any rom
*IT HAPPENS WITH ME SINCE 2 WEEK
*YES GPS SOFTWARES BUT AFTER the problem
*ONLY THE REGISTARY OF CAM TO SHOW THE EXTRAS AND NETFRAME FROM 3.5 TO 3.7 ALL THIS IS SINC TWO DAYS
NB= MY PROGRAM MEMORY IS USING 45% OF THE CPU IS THAT NORMAL WHEN I DO SOFT RESET IT RETURN TO 37%
thanks
any ideas plz
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Mastoid said:
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
i know this option but i need a solution without having a hard reset thanks any way
can't you just backup before hardreset ?
To be honest, I think a Hard Reset would resolve your problem with the dropped calls... but if you are unwilling to perform a hard reset, then I would suggest that you try sending your phone back to HTC for repair assuming it is still under warranty?
Best Regards.
well this depends greatly
which end call button is he using. if it the red software one then its a software problem, and this would be remedied with a had reset
if its the one on the bottom of the phone with the 4 button (start call, home, back and end call) then this could indicate a hardware issue and in that case i recommend a return to vendor

[q] help!!! Hardware buttons stopped working

Just got my device today, and the hardware buttons stopped working after about 30mins. occasionally the volume button will work for a few seconds but thats it. i cannot flash dexmod cos of the lack of functioning keys. is there something i can do to make the keys start responding?
It seems as hardware problem. But try to wipe data / factory reset in settings
done that already...the keys are still not working. is it possible to apply the adhoc fix to the stock rom? (using the updater in settings)?
5[Strogino] said:
It seems as hardware problem. But try to wipe data / factory reset in settings
Click to expand...
Click to collapse
bookoo_brainz said:
done that already...the keys are still not working. is it possible to apply the adhoc fix to the stock rom? (using the updater in settings)?
Click to expand...
Click to collapse
Can't be a hardware problem if you can navigate the recovery menu to access wipe/clear
i have not been able to access the recovery menu, what i did was to install button savior and reset to factory settings thru the settings menu. button savior does not work in the recovery kernel.

Remapping keys omnia 7

Hi All,
During a Succefful ROM Flash operation, i unplugged the usb cable accidently.
Now i have this problem :
Key Camera increase volume
Key Volume up decrease volume
key Volume down do nothing
So is there any method or application to install and remap these keys ?
For information, my phone is Unlocked
Thank you
RESOLVED
Problem fixed after update to SE : 7.0.7392.0 by Zune software
Thank you all

Categories

Resources