Hi guys,
i need a help before i buy something i will not use:
I have a dead herm100 (no gsm problem) and i can buy on ebay a HERM200 with broken LCD.
Is the HERM100 LCD and TouchScreen compatible with HERM200?
are the flex cables behind it the same as well?
thank you for your help
mickscores said:
Hi guys,
i need a help before i buy something i will not use:
I have a dead herm100 (no gsm problem) and i can buy on ebay a HERM200 with broken LCD.
Is the HERM100 LCD and TouchScreen compatible with HERM200?
are the flex cables behind it the same as well?
thank you for your help
Click to expand...
Click to collapse
HTC used at least three different LCD screens made by different manufacturers. You need to get a match or they will not work. The digitizer circuits are differnt for each one (that's why you need a match).
The only way to know for sure is to look at the label on the back of the LCD.
I have written a post somewhere on each manufacturer, but basically it would be a gamble unless you see the labels. Perhaps if you have relatively close serial numbers you might be ok. There is some serial number info on the wiki.
Mike
thank you very much mike,
your words where very usefull for me...i probably will keep my herm100 dead, i don't want to risk money!
Related
hi. i have an 8125 and i was painting and fell from the ladder. i wasn't hurt all that much but the the screen on my 8125 cracked and now there is bleeding everywhere inside my screen.
does anyone know if i can replace the screen easily by myself or where i can even get a screen?
i think someone was going to sell me a broken MDA (screen good) and wondering if that screen would work for the 8125.
thank you.
Hi!
There was similar discussion some time ago:
http://forum.xda-developers.com/viewtopic.php?t=51395
Actually I broke my screen too this weekend I ordered replacement from ebay, such as this one:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140005879931
I am going to try to replace it by myself according to Wizard service manual. In my case only touch screen is damaged - not LCD, but it seems that these come as one unit. If I will find that these can be separated, I will have spare LCD part. In my case I have O2 XDA mini s - I do not know if lcd is the very same as in Cingular 8125 you have.
theorist said:
hi. i have an 8125 and i was painting and fell from the ladder. i wasn't hurt all that much but the the screen on my 8125 cracked and now there is bleeding everywhere inside my screen.
does anyone know if i can replace the screen easily by myself or where i can even get a screen?
i think someone was going to sell me a broken MDA (screen good) and wondering if that screen would work for the 8125.
thank you.
Click to expand...
Click to collapse
Gutted for you m8. Hope you manage to get hold of something cheap.
Update to my previous post - after much tinkering I was able to replace broken touchscreen of my mini-s.
Some notes:
According to Wizard service manual there are two LCD versions:
p/n 60H00032-00M - LCD Module, (LTP280QV-E01 Samsung)
p/n 60H00037-00M - LCD Module, (TD028STEB1 Toppoly)
It seems that these are not interchangeable but I might be wrong. I was trying to replace my 60H00032-00M with new 60H00037-00M (whole module with lcd & touchscreen), however it did not work - LCD switched on but was all white. Then I managed to separate touchscreen from new module and replace it with my broken one. Seems that it is working now. It is possible to replace just touchscreen but care must be taken not to break it and some very fine soldering must be done.
To theorist - if you want to replace LCD by yourself you should check for exact part number of your LCD and find similar one - that should work.
So now I have spare and useless for me 60H00037-00M LCD Module (LCD only without touchscreen) that probably is in working order as I suppose that it is just not compatible with my mini-s.
In the US, HTC America can fix it. http://forum.xda-developers.com/viewtopic.php?t=49361&highlight=
Hi There,
I recently had to replace my screen with one I got from ebay. However being slightly careless I damaged the ribbon cable that connects the screen to the Mainbored
Has anyone got any ideas where i may be able to locate one of these?
attached is a picture of the damaged part.
Any help would be much appreciated
Thanks
Replacement Ribbon
Hi, You might want to try giving these people a ring or look on their Website as they sell parts for PDA's
http://www.turnonyourmobile.com/
Gez said:
Hi There,
I recently had to replace my screen with one I got from ebay. However being slightly careless I damaged the ribbon cable that connects the screen to the Mainbored
Has anyone got any ideas where i may be able to locate one of these?
attached is a picture of the damaged part.
Any help would be much appreciated
Thanks
Click to expand...
Click to collapse
You can order one from http://cnn.cn/shop/8525tytn-flex-cable-p-1732.html
That’s brilliant thanks, just ordered one. On the picture they have on there site I couldn’t see the black connecter which holds the cable in place. Guess ill see if it comes with it!
Thanks for you help much much appreciated.
can anyone say from where to get the flex cable nopw am in needliy urgent of the flex cable
sorry for my poor english
You can get both types on ebay(uk). Look for a username of shop-uk and they have both black and gold flex types (getting one myself to fix a hermes!). I think they are £15.99 GBP
After obtaining a replacement touchscreen for my Touch HD; (no problem, $45 Australian ex Hong Kong) and after much searching, can still not find any reference to replacing the screen only. Can it be done or does one have to dismantle the whole thing as demonstrated in the service manual? It looks as if the touch screen and LCD screen are glued or taped together, but presumably can be separated. Has anyone managed to do this repair? Just need a few more clues as to it's feasibility. My screen is merely cracked due to pressure. All still functioning. This is obviuosly not a unique problem, but the answers are elusive.
heres the service manual, hope be helpful....
enjoy..
http://mikechannon.net/PDF%20Manuals/HTC_Blackstone_Service_Manual.pdf
manual
Thanks for trying but as mentioned, I have the manual and its does not help. The question remains, does anyone actually have experience of replacing the screen?
Himalaya have two different Main Board?
I have two O2 XDA II, first one with broken LCD and the second one with broken LCD's connector. When I try to combining them, I found that the main board is different.
First one have LCD with P/N : 60H00022-03 and the second one have LCD with P/N : 60H00011-00, that's mean the main board series is different also.
I read the manual service, and it said the P/N is : 60H00011-00. Is that true that Himalaya published with two different series?
Please help me...
i have here my old tytn broken a part...the LCD screen in a brand new condition...i was wondering if it will fit on my kaiser?
looks pretty same...
HoLy4EvEr said:
i have here my old tytn broken a part...the LCD screen in a brand new condition...i was wondering if it will fit on my kaiser?
looks pretty same...
Click to expand...
Click to collapse
The only way it can work is if it is identical, not just similar. Even TyTn screens cannot be used with all other TyTns. The reason is that the TyTn for example had 3 different manufacturers of screen. Each one of those had a compatible digitizer circuit to match the screen. So, you might well find that a screen fits, the ribbon cable connects, but all you get is a white screen (because the screen is mismatched with the digitizer circuit) Manufacturers include the likes of Toppoly and Hitachi.
So, you need to check the product numbers on the back of the screens. Or indeed search these forums, I'm sure someone will have given details for the Kaiser or linked to a site that gives the product number (either the HTC code or the Manufacturers code). I'd check myself, but time is short.
Mike
mikechannon said:
The only way it can work is if it is identical, not just similar. Even TyTn screens cannot be used with all other TyTns. The reason is that the TyTn for example had 3 different manufacturers of screen. Each one of those had a compatible digitizer circuit to match the screen. So, you might well find that a screen fits, the ribbon cable connects, but all you get is a white screen (because the screen is mismatched with the digitizer circuit) Manufacturers include the likes of Toppoly and Hitachi.
So, you need to check the product numbers on the back of the screens. Or indeed search these forums, I'm sure someone will have given details for the Kaiser or linked to a site that gives the product number (either the HTC code or the Manufacturers code). I'd check myself, but time is short.
Mike
Click to expand...
Click to collapse
Finally I found you!!!
I think you are the expert that may help me
I have a broken Tytn ii LCD and i bought the replacment and the tools for dismantle from ebay.
everything is ready but what i lack is the method
I heared and read many threads that say there is a method to replace the LCD only with undo the 4 screws (without dismantle the base) and this what i want exactly.
Could you provide me with any instructions, photos, details that would help me ???
Thanks in advance
Hi all,
I've the following question.
My screen cracked with the LCD.
Now i see on ebay different kinds of lcd. So far i know is that the solder type screen is meant for the EU version and the no solder are for the TMOUS...
Or am i wrong?
I dissambled my HD2 and i saw that my LCD+digitizer is the no-solder part.
Can someone provide me the part number of that or those two parts (LCD + Digitizer).
I want to buy the correct screen.
Thnx in advance
there is some good info in this thread http://forum.xda-developers.com/showthread.php?t=1219130