Related
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
WOOOOHOOOOO!!!!!!!! WEEEE!!!!! YOU ARE OUR MAN!!!!
LumpiStefan said:
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
Click to expand...
Click to collapse
Btw if you need a PW10A1 tester, you can mail me/find me on msn: [email protected]
Ok. Now it´s done .....
Rom is available.
Until now there are a few linitations with this ROM:
1.) Bootimage are not adjustable. Needs more investigations
2.) Flashing is only via EXE-File possible, because this ROMs are little bit bigger than the normal an xdatools checks the filesize.....
3.) Part of ROm that was reserved for backup is used in this ROM, so those data will be destroyed while flashing.....
ROM is available without any additional Programs (Download the Attachement) and also already included in the kitchen (http://lumpistefan.dyndns.org/).
I cannot gurantee, that all is working fine. So flashing is on your own risc....
Also it would be great if some nice guys donate for the xda-developers or for me. Link ares available here and on my kitchen....
If you have any problems, please use this thread, PM to me or Email....
Have fun with the new ROM...
Stefan
LumpiStefan Gr8 Work
In the rom kitchen it's available with additional file size after adding some softs it's 16.1 , is it safe to flash it?
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Does it still have the SD-erase bug?
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
ramram said:
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
Click to expand...
Click to collapse
It is faster than WM2003
when will it be revealed in german?
It's working good and it's faster- movies works faster.
I hope that SD card erase bug is fixed.
I tested it, so far working and fast. I'm just waiting the Sd-Erasure bugg... I hope it wont happen....
theholysaint said:
when will it be revealed in german?
Click to expand...
Click to collapse
I think never. :-(
Stefan
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Hi Stefan,
i am geting GetDeviseData error, any idea? btw thanks for great work
LumpiStefan said:
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Click to expand...
Click to collapse
I think it does not (i repeat, i THINK). The sd-erase bug was a bug in Windows CE 4.2 (WM2003 based on that), and there were a patch that correct that bug (if you have the WCE4.2 source of course ), so WM2003SE should be patched.
kamiar said:
i am geting GetDeviseData error, any idea? btw thanks for great work
Click to expand...
Click to collapse
There are 2 possibilities:
1.) Wrong device. This only works with Wallaby devices (XDA I / MDA I / ... )
2.) You have rom that prohibits flashing via exe (e.g. 4.01.16) Than you have to downgrade first via SD-card (e.g. Special Edition ROM) and then upgrade to WM2003SE
HTH
Stefan
As I remember I flashed my device with this ROM long time ago, Lumpistefan you finnaly sort it out to let it work GOOD WORK!!!! :wink:
were can i gt the patch
im trying to upgrade i dont have the patch yet sd eraser.
Hi,
I had rom 4.01 and had to downgrade to 3.17 with SD to be able to upgrade to 2003SE, i did that but now it hangs at boot screen and the problem is that i dont have a card reader and even can not sync, how can i make another image on SD or any other solution?pls
Thanks
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
The rapidshare link is http://rapidshare.com/files/125020971/POLARIS_WM6.1_v1.60.08.21_B19214.7z and the rar pass is always PhamQuang
=Fixes from previous release: Diamond_Arcsoft_MMS_5_0_31_16
- ConnectionSetup_1_5_34057_2
- EnlargeStartMenu 1_2_34070_1
- TaskManager_2_1_33803_1
Thank you PhamQuang....
pafimal said:
The rapidshare link is http://rapidshare.com/files/125020971/POLARIS_WM6.1_v1.60.08.21_B19214.7z and the rar pass is always PhamQuang
Click to expand...
Click to collapse
Cheers pafimal, you beat me to the post, just flashing now...
Attached are 2 screens showing the OS change, looks like a thank you for Tom_codon from PhamQuang.
Cheers gadjet you are the first who flashing...my battery is too slow and ill try flash later.
flash
hi guys. wats the password
Anyone?
A bit of a side topic I know, but I dont need to run "Hard-SPL-V2" anymore?
Everytime I flash back to the original cruise rom, then I just flash the new rom?, is this normal?, do you only have to run Hard-SPL-V2 once only?
I used Hard-SPL-V2 about 10 flashes back when my cruise radio went down, fixed via Radio_Murata_PPAS_1.58.21.23, and now I dont need to use Hard-SPL-V2?
imxfr said:
hi guys. wats the password
Click to expand...
Click to collapse
The password is PhamQuang..
tkanks bro
Fast rom...
What a good rom so far, very very fast, i think it is the fastest rom to-date...
Testing all my favorite programs now..
UPDATE: just realised...I dident need to flash the Radio_Murata_PPAS_1.58.21.23 after updating to this rom, yippee..
Thanks PhamQuang...
gadjet said:
A bit of a side topic I know, but I dont need to run "Hard-SPL-V2" anymore?
Everytime I flash back to the original cruise rom, then I just flash the new rom?, is this normal?, do you only have to run Hard-SPL-V2 once only?
I used Hard-SPL-V2 about 10 flashes back when my cruise radio went down, fixed via Radio_Murata_PPAS_1.58.21.23, and now I dont need to use Hard-SPL-V2?
Click to expand...
Click to collapse
once you hard spl you do not have to do that step any longer.
gadjet said:
What a good rom so far, very very fast, i think it is the fastest rom to-date...
Testing all my favorite programs now..
UPDATE: just realised...I dident need to flash the Radio_Murata_PPAS_1.58.21.23 after updating to this rom, yippee..
Thanks PhamQuang...
Click to expand...
Click to collapse
for first time my polaris is frozen with this version..i dont know why???i ll try to flash again
good rom
good, fast and stable
the only proble i got is i cant use my french illimitycs. I can use the net and everything else but i need a vodame cab file to istall on my polaris. if anyone can help get the cab file!!!!!!!!!! its a kind of shortcat.
anyways thanks for this A+++++++ rom
What about send mms messages I know V20 could not.
Thanks,
WOW!!! Nice ROM, the FASTEST yet, a bit light on the features but very fast!!!!!
What about send mms messages I know V20 could not.
Thanks,
Click to expand...
Click to collapse
MMS works fine for me. Overall, ROM appears great. No apparent problems to date.
New ROM
Can someone supply some pictures of this new one???
mybe a link that describes it features?? (in English...)
Thanks
v.call is not working (I guess its a feature)
Speed voice dial button is not working (fixed in attachment)
taiseer999 said:
v.call is not working (I guess its a feature)
Click to expand...
Click to collapse
Lol yeah its not a bug
Link
L10nH34Rt said:
Lol yeah its not a bug
Link
Click to expand...
Click to collapse
Wow now my knowledge has increased, thanks pal
Great rom! its getting better and better. Thanks taiseer for the cab file!! was just about to write about that `bug` ;
why is the error report still in the rom? its allways in his roms can't figure out why, and Get Started should be gone too!
I've installed the new ROM for the first time on my brand new LEO, everything seemed to go well..then after finishing it it rebooted..and the phone dean't start at all..all I see is a white screen with HTC on it..and that's it..nothing happens then..
I tryed to HARD reset..and it won't work neither..please someone help me..
imauser said:
I've installed the new ROM for the first time on my brand new LEO, everything seemed to go well..then after finishing it it rebooted..and the phone dean't start at all..all I see is a white screen with HTC on it..and that's it..nothing happens then..
I tryed to HARD reset..and it won't work neither..please someone help me..
Click to expand...
Click to collapse
You need to flash a radio like the 2.07 or the 2.08..........it is in the wiki,and manual in the sticky
http://forum.xda-developers.com/showthread.php?t=609477
thnaks for a fast responce..i seem to find a solution..I've pressed the volume donw while booting..an now i am reinstaling another ROM..hope its gonna work..
..cross my fingers..
THNX GOD and tinuz97 for a fast reaction it worked!!
if anyone have the same problem..I'll gladly help
imauser said:
THNX GOD and tinuz97 for a fast reaction it worked!!
if anyone have the same problem..I'll gladly help
Click to expand...
Click to collapse
no ta mate, id rather read the instructions first.
Hello community,
yesterday i flashed ansar´s new WPh7 ROM V3 on my HTC Hd2. I like it very much but it isn´t "Fully Unlocked". By solving this problem i found several sources which solved this by using WP Root Tools. I tried to install it on my HD2 but everytime i started it it says "Incompatible". Normally it should start with a 2 Step installation. By running the root tool it says "needs root access" . It´s a circle... i need root access to get root access
Hope someone can help me solving my problem.
My Phone:
HTC HD2
2.15 Radio
Ansar´s WP7 ROM V3 L18 (http://forum.xda-developers.com/showthread.php?t=1510444)
Stock SD
ROM is full unlocked and you have other problems...
try this one
if nothing help, try Pdaimatejam ROM... Root Manager is part of ROM....
dxdy said:
ROM is full unlocked and you have other problems...
try this one
if nothing help, try Pdaimatejam ROM... Root Manager is part of ROM....
Click to expand...
Click to collapse
Thx for your reply.
I just tried your file but it was the same result... First i have to accept the License Agreement and after that it shows me "Your device is incompatible...."
In the Thread of ansar other people got problems with root too but WP7 Root Tools worked for them.... Can´t understand why. Is the same phone etc...
At the end of the text: "If you have a full unlock ROM you can give root access to wp7 root tools" sounds funny for me
I just came from Pdaimatejam ROM but bluetooth-headset doesn´t worked for me so i switched to ansar...
hope someone can find a solution?!
Hi!
Test Ansars Version 2. That works fine
ohl said:
Hi!
Test Ansars Version 2. That works fine
Click to expand...
Click to collapse
Okay, i will try. There are not much changes between the versions.
I thought this rom will fix my problem with bluetooth headset in my car. It´s like whispering and if i turn up the volume it sounds horrible :s
blackstoneowner said:
Okay, i will try. There are not much changes between the versions.
I thought this rom will fix my problem with bluetooth headset in my car. It´s like whispering and if i turn up the volume it sounds horrible :s
Click to expand...
Click to collapse
Hi, so, what about the BT?
c3cilka said:
Hi, so, what about the BT?
Click to expand...
Click to collapse
BT still doesnt work for me in my car. I think its a general problem with the bluetooth-profile. :| Bad luck for me . And i thought its perfekt
I don't know what about V2 but V3 works for me(Philips Tapster) and is amazing. (first 7.8 ROM with fully functional A2DP)
Unfortunately, i need root too. Ohh ansar, we need you help.
Ansar rom is full Unlock
Welcome to the club
I hope there will be a solution in the future
titi66200 said:
Ansar rom is full Unlock
Click to expand...
Click to collapse
"Yes it is!" and therefore we post this thread, isn't it?. :laugh: Oh man, if app says "requires root access" maybe is something wrong with us.:laugh:
Ok, "WP7 Root Tools" solved my problem
Install>Step1>Restart>Step2>Restart>open WP7RT>Permissions(change for req app)>Restart :highfive: (perhaps, last restart isn't required)
c3cilka said:
Ok, "WP7 Root Tools" solved my problem
Install>Step1>Restart>Step2>Restart>open WP7RT>Permissions(change for req app)>Restart :highfive: (perhaps, last restart isn't required)
Click to expand...
Click to collapse
really i thought it would restart automaticly... It starts again....
Yes, it will shutdown itself(but i had to start it up),
i notice "restart" just for sure
Thanks