I am trying to make the goldcard
http://forum.xda-developers.com/showthread.php?t=417930&highlight=goldcard
Everything goes fine until the last step. Then I get: ERROR: ITReadSDCard - the parameter is not correct (translated from Dutch) What could cause this?
Please help me,
Jacco
format sd card via another wm device.
Related
Guys! I did something wrong. I upgraded my 3.16 ROM to the T-Mobile 4.00.21. It works fine, but I don't like 2003 so much. I want downgrade. I tried to use Programme A, but i always have this error message in a Dos windows:
ERROR: GetConnectionType
After that the program is always cancel. What to do?
An other error message
I found an other error message. "Cannot execute the remote communication program. Please make sure that the USB cable is propertly connected"
Yes. It's connected activesync is working propertly. Communication is ok. Only the upgrading software can find error.
you must use ActiveSync 3.7.1,
you need un-install it.
Install ActiveSync 3.7 or lower version
I don't think ActiveSync will work ... TMO ROMs do not accept the USB flashing ... you may have to use the SD card method.
Problem Solved
Thank you guys! I did the SD Card Method and It works fine. That was long time to solve to problem and learn how to use the SD card method, but now everything is fine. Thank you again!
While trying to put a new ROM image, Adaptrom barfs with the following error "GetDeviceData - An existing connection was forcibly closed by the remote host". I couldnt find any way around it, does anyone have any idea how to fix this ?
Thanks in advance !
The sd card method of flashing is a much better way of flashing and is alost zero error prone.
Help me please, i dont khow what to do after flashing 4.00.21 i cant flash new one after that. xdatool write that:
ERROR: GetDeviceData - An existing connection was forcibly closed by the remote
host.
error getting devicedata
Tell me please what shall me do (
Use sd card method of flashing.
I have tried to install an upgrade for my xdaII. Unfortunately it was UK upgrade I started to install into my Asian xdaII. Halfway through the installation there was a ROM version error and it has rejected installation.
Now there isn't any software or an operating system in my pocketpc. There is no way I can sync this with my pc for the installation of the correct version.
Can anyone help?
there is this guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
you can extract the nk.nbf file from the UK upgrade and use xdanbftool.exe to modify the language ID then re-flash your device.
In your case, you should have a frozen dimmed screen with the word "Serial" on top and the boot loader version towards the bottom of the screen ... if by inserting the device into the cradle the word Serial changes to USB, this means the boot loader is still in function.
Good luck
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
Can you please help!
Isn't there anyone who can help me soon???
hello,
after flashing yuki/xboxmod back to the future v2 rom i hard reset the phone (after 123456 gogogo ) and updated through zune as far as zune went (7392 nodo).
now i wanted to send cab files. followed all instructions, but when i pressed S (or B, no difference in results) i got the following error:
Error: Retrieving the com class factory for component with CLSID <77CB935D-D0CC4249-86433C387A514A27> failed due to the following error: 80040154.
Call stack:
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager .Iinitialize<>
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager .get_Instance<>
at wm7update.Program.Main<String[] args>
does anybody know how to solve this problem?
i tried it on a windows vista x64 system, starting the cab sender as both admin and not.
i did do a hard reset after installing nodo 7392. this did not solve the problem.
deviceprovisioning.cab is in the cab sender folder. i did not unpack this.
hope anyone of you can help me fix this problem. thanks in advance
jronimo
If you are at 7392 then you shouldn't need to send cabs to get to official Mango, Zune should offer an update.
You can try to force an update using http://www.wpcentral.com/force-mang...ne-software?utm_source=wpc&utm_medium=twitter. Please report back your findings.