Guys! I did something wrong. I upgraded my 3.16 ROM to the T-Mobile 4.00.21. It works fine, but I don't like 2003 so much. I want downgrade. I tried to use Programme A, but i always have this error message in a Dos windows:
ERROR: GetConnectionType
After that the program is always cancel. What to do?
An other error message
I found an other error message. "Cannot execute the remote communication program. Please make sure that the USB cable is propertly connected"
Yes. It's connected activesync is working propertly. Communication is ok. Only the upgrading software can find error.
you must use ActiveSync 3.7.1,
you need un-install it.
Install ActiveSync 3.7 or lower version
I don't think ActiveSync will work ... TMO ROMs do not accept the USB flashing ... you may have to use the SD card method.
Problem Solved
Thank you guys! I did the SD Card Method and It works fine. That was long time to solve to problem and learn how to use the SD card method, but now everything is fine. Thank you again!
Related
Since installing the Tmobile ROM, I have been unable to load new programs or get my device to synch at all. I get a connection error each time:
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
I don't have an SD card (yet), but I was trying to load a kitchen ROM, then tried installing phonext to see if I could get anything on there.
The T-Mobile ROMs have problems talking through ActiveSync. I have personally observed only that you can no longer use 'Programme A' to go to a new ROM, and that you need to use the bootloader/SD-card method instead, but maybe I've missed other things...
(Hmmmm, maybe they turned this silly admin policy thing on...)
Well, what would cause it to not want to synch or even install new programs?
As of today I can get it to synch with Outlook, however still no go on the rest. I will try the bootloader method tommorow at work.
Have you tried a complete reinstall of the latest release of activesync.
Hello all, I took the bull by the horns this morning and upgraded my PPCPE to 4.00.16 ENT T-Mobile US from JSummers ROM Kitchen.. I used the EXE installer and everything works fine.. I did have to upgrade form Activesync 3.6 to 3.7 once the upgrade was done..
Tonight I decided on trying some new options from the kitchen and downloaded a new EXE.. (still 4.00.16) just with EzWap2 this time..
But the EXE installer won't see the PPC anymore, even though active sync sees it and it syncs just fine. A DOS window comes up and says "ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connectiontype." The installer window still shows up though.. When I click next to install I get a windows popup box that says "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR - Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected." When I try again I get another dos window that says "ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. Error getting devicedata".
Am I doing something wrong here?? I've tried the SD method but apparently my SD card writer/reader isn't compatible with XDArit and it writes sucessfully but won't read the card back and the PPC doesn't recognize it as valid..
Help!
:shock: Have you read small notes beside the rom version which tell you to be very carefull before using rom 4.00.16. The notes telling you that after you flash with that rom version will unavailable to reflashing or downgrading with other rom version. Sorry, only this far I could help you cause I'm still a newbie to.
You can go back to a different ROM or the same with more stuff like your situation. BUT you HAVE to do it the SD card way. Search the forum and you will find more info about this. (SD card method)
XDA Tools not working for me now. I am using Jeffs XDA tool with Programme A, and well I have been able to use it before with my XDA but on a different PC.
Anyway, XDA tools is working in regards to being able to download my present ROM from the device to the hard drive.
Now when I use it try and put a new ROM on the device I am getting an error.
This error shows up in the CMD.exe box that pops up when trying to do this:
"ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype"
Then the programme A v1.09 pops up and I hit next and next.. then it trys to connect saying:
"Getting data from device... Please wait for 10 seconds"
Then a windows error dialog box pops up saying:
Error 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
Like i said the device is working and connected. Works through Active Sync just fine, and even XDA Tools works when going from device to computer but just not from computer to device.
Any ideas?
I was hoping to try out this new ROM: A.30.07 ENG.nb1
Thanks in advance!
Still holding out hope I can get this resolved. If anyone has any ideas please let me know.
Thanks
Never mind, I have moved to using the Wallaby boot loader and SD to update the ROM and all worked just fine.
Thanks again for all the fine advice on the forum.
I've search the whole forum and the internet for a solution of this issue at vain. Is there any guru who can help us in any way?
well being that
RasnCain solved his issue i guess he can
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Well, I don't have a SD card at the moment -(
Hi I am trying to flash a rom made in the kitchen as a .exe file from the pc and get the error “cannot execute the remote communication program.” I have checked the usb and it seams to be working fine.
I am also cannot explore the devise using the pc through either activesync or my computer the window appears blank. Pleas help
Ian
this means your bootloader version has a protection mechanism ... maybe it's 5.22. anyway, this means you can only use the SD card flashing method.
I am running Windows XP Pro SP2 RC1 and having successfully used the USB connection to update the ROM on my 02 XDA 1, I then discovered that I have the T Mobile version of software.
It all works fine but I did not want T mobile so I used ROM kitcehen to create a new ROM and tried to load this. Unfortunately I now get two errors. The first is via the Command prompt "ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. error getting devicedata" and the second from the upgrade software "Error 011 Execute Remote Communications Program Error. Cannot execute the remote communications program. Please make sure the USB/Serial cable is properly connected". Since my USB connection is properly connected - I can synchronise with my PC and load applications to the XDA - then I am unsure what to do.
Can anyone please offer assistance with resolving this problem?
:?: Why do you think, there is a search button in this forum? Have you ever tried it? :?:
I just tried it with the keywords Error and 011 and i got 20 hits.
The first one was your posting an the second one gives you the answer, why you're getting this error and how to fix it....
Check this link:
http://forum.xda-developers.com/viewtopic.php?t=9010&highlight=error+011
HTH
Stefan
Stefan,
I'm having a real bad day....Yes I should have searched. Please accept my apology and grateful thanks for the link to solve my problem.
Regards,
Stan