Hello all,
I've been lurking around here for a while, and am currently running BR's latest 6.5 ROM.
Regardless of the ROM though (stock HP, Montecristo, or BR), I've been unable to get the internal SIP VoIP functionality to work using destr0's tool. I've tried 3 variants, and can never succesfully dial out - it tries to dial, then ends with "2621:29" as the call time.
Any ideas? Has anyone had success getting VoIP working with the 91x?
Thanks,
Colin
Dunno. My latest WM6.5 ROM (build 21815) has the VoIP packages included, but you have to enable the feature in the Phone control panel under the "internet" tab. Beyond that, I have no idea how VoIP even works on WinMo. Let us know if you make progress.
Thanks for your reply. I've tried a few variants of the VoIP provisioning tools that are floating around and referenced in the VoIP threads on here... Even when the VoIP shows as available, it's not able to dial and ends the call with one of a few symptoms:
-2621:29 in the time box
-unable to make call message
-letters and percentage signs where the dialed number was (to do with the ipdialplan.xml file???)
Cheers,
Colin
Related
Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Are your contacts on your SIM or in your devices phone book?
Works fine here by the way.
I have the same problem
Stu
They are on the phone not the sim. This is Windows Mobile 2005 not 2003
Mikee4fun said:
Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Click to expand...
Click to collapse
right, the contact summery comes up but it's empty - the content of the notice field you can see - and you can say "yes" and voice command is calling your contact.
MS Voice Command 1.5 is not supported for WM5
regards,
Udo
--
MDApro
It is a bit sketchy
I can launch programs great, i can call people fine. change brightness.volume and I get announcements such as battery is running out
the only things that don't work is showing contacts and hearing the spoken callerid.
It is going to come down to waiting for an update
I thought mine was working fine too with WM5 but after several days of resets and minor other problems, I finally cleared the device and didn't reinstall VC and now it runs a lot better. so bottom line... VC 1.5 causes problems on the universal... although it seems to work ok.
Uninstall MSVC
Anybody know how I can uninstall it, and get it out of my settings control panel. I used the .cab installation.
I had to use the Erase memory icon in Programs... it clears the entire unit and sets back to factory defaults.
Please anybody try VITO Voice2Go on JasJar. It's a new voice control application for Pocket PC. Supports all languages.
I personally use this program on my i-mate Jam, and it works fine. Want to khow how does it works with Universal.
Product site: http://vitotechnology.com/en/products/voice2go.html
MSVC and Contacts
Has anybody overcome this problem? I just revisited this, and it does appear to work for everything, including dialing the contacts.... but.... I cannot get it to show a given contact. It will open the contacts list, even repeat back the phone numbers its dialling, but will not show the contacts individual details, at all.
Any feedback? Perhaps delete all contacts, and resynchronise them all?
Regards
Simon
It must be just the Jasjar as I had WM2005 on the XDA II and never had a problem.
I couldn't even get the US Version to work, I eventually got the UK version on and working but I have the empty screen issue in contacts.
Voice Command works fine for me. The contact is blank, but the program itself works fine
Well I guess it's better than nothing! I was always under the impression that Voice Command was actually integrated into WM5; seems not.
Hopefully 1.6 will address these issues...
Voice command work well with the 1.51
I have cyberon speed dial installed by default on XDA Exec, it works fine
Am I right in saying that "cyberon" is not the same as VC, you have to record something for every contact you want to use it with.
When you have alot of contacts, even the thought of doing this is stupid, maybe if it was just your family including Grandma that would be fine but when your running a business and your ringing different people all day.........
Maybe I am wrong, i have never used it......
sayreul said:
Voice command work well with the 1.51
Click to expand...
Click to collapse
so your saying there is a voice command 1.51. i can only find 1.5
link?
I feel the same way, I did a Google search and nothing, what is 1.51, are you trying to manipulate us into thinking there is a fix to our problems bought on by micro$oft.
Please let us know....... :shock:
Oddly it worked perfectly on my dodgy beta WM5 on my BlueAngel :S
Hi all, do you have any recommendations for good SIP software that runs perfectly on Windows Mobile 5.0 devices, such as the HTC Wizard/O2 Xda Mini S?
I have tried SJPhone, but it doesn't allow you to answer incoming calls, presumably due to a difference in the way WM5.0 handles notification pop-ups (the only option I get is 'Hide'!).
Also, it needs to allow a different inbound and outbound proxy service. I can't find a way to do this with SJPhone.
Skype and SJPhone. SJPhone can support many SIP services, like Ekiga, Stanaphone, Gizmo and others. Requires some configuration.
Thanks but did you read all of my message? :shock:
The fact that it doesn't allow you to immediately answer is because SJPhone, like Skype, doesn't support the hardware buttons.
As for the proxies, YES, you can change those in SJPhone. Create a new profile and then edit that profile.
Thanks.
1. You say it doesn't allow "immediate answer", but I can't get it to answer at all, let alone immediately. Even if I switch to the app itself and press the phone icon (like when making a call), it just makes a new call and ignores the ring!
2. What is the name of the setting I change for the incoming proxy? I can't really see a different setting anywhere for that.
Info on my article here: http://www.osnews.com/story.php?news_id=12048
Make sure you download the latest beta SJPhone, not the currently stable version, because the beta has a lot of bugs fixed.
As for not answering a call at all, either the HTC Wizard is too slow to do VoIP, or the app is too buggy. File a bug report with them.
Eugenia said:
Make sure you download the latest beta SJPhone, not the currently stable version, because the beta has a lot of bugs fixed.
Click to expand...
Click to collapse
ok... revive this old thread...
so download or dont download the beta?
the the site for this software it doesnt seem to show WM5 support
yall have link for download ?
-_Thogue
http://www.qtechinc.com/speaq_download.htm
is a new one to try out.
agephone v.65 for wm5
http://download.seesaa.jp/archive/win/net/n_other/AGEphone.exe
but it have to find a solution to test it more than 30 days
I had updated to WM6 recently and tryed with several VOIP SIPs.
Someone told me that there is a VOIP service in WM6 but don't know how to config it. Tryed Schaps VOIP Setup with no success.
And also tried SJPhone but I don't like it because you can't use the internal speaker (the same as for calls) to hear, only the external speaker as If I were using the music via windows media.
My intention is to make voip calls as if they were calls from the mobile normally.
Any incoming ideas? I would like to have this working soon
MiSSigNNo said:
Any incoming ideas? I would like to have this working soon
Click to expand...
Click to collapse
Cook your own ROM with pandora, include VoIP and voila. Find a SIP provider and your going.
I spent a couple hours sorting through blog posts, downloads, cabs, blah blah blah... with the goal of getting my forsaken Treo Pro (WM6) to use VOIP through my office's SIP/Asterisk setup.
To save you all some headaches, here's the distilled version of what I found to be the best combination of software and quick hints for install:
I started with this blog post, to give credit..
http://voipguides.blogspot.com/2008/05/voip-sip-client-for-windows-mobile-6.html
But I used different software... so I've included a zip with the package of all the stuff I installed to make the damn thing work.
1) Install all of these:
- voipdrivers.cab
- custelvoip.cab (works better than MajikVOIP.cab)
- sipconfig.cab (originally named SipConfigTool_2_0_1.CAB)
- audioroute.cab (from http://www.teksoftco.com/index.php?section=freeware)
I've also included setupvoip.cab .. which is a fancier SIP setup tool, and may work better than sipconfig... but I used sipconfig originally, so that's what I'm writing up here.
2) Restart your phone
3) Run sipconfig ... enter all of your sip configuration details, and also use the menu option to enable VOIP over 3G if you desire it.
4)Now go start -> settings -> personal -> Phone. Choose ther Internet Calling tab. Set the option for "whenever available".
5)On the main/Today screen you will see a phone icon with description VOIP ( you entered name of provider VOIP in (step 4). It'll show you the status of whether or not it has registered with SIP. A Hint, you might need to trick the phone into connecting to 3G first... e.g. by browsing the web... otherwise WM6 at least doesn't seem to auto-connect to 3G for SIP.
6) After connecting using 3G or wifi, You will see the status displayed as VOIP: Available.
7) You can now make calls as normal, or receive calls in.. and everything is routed through VOIP.
8) You'll notice that many WM phones will route the audio through the rear speaker (annoying) .. which is why you installed audio router from teksoft... it adds a little icon on your top system tray to let you change between earpiece and rear speaker for audio. There's a bunch of audio switchers out there. This is the best one by a mile. And it actually works.
Cheers,
Andrew Eross
Thanks for your effort. Similar tool is already posted as Schap - Setup voip Tool -
http://forum.xda-developers.com/showpost.php?p=1364611
Thank you!!!
I've looked around for a guide as clear as yours. You've the best guide all around... Thank you a bunch...
Thanks for your great job. I new on Windows Mobile so I need a lot this kind of help.
I download and followed your installation procedure on a HTC 3G+, T3238 (chinese version of the HTC 3G, manufacturer HTY Taiwan)
Works well, Hope others also will be successfull
By the way, is there an also simple way to sending DTMF tones for remote control of my answering machine? When I try to send numeric keys after the call is connected it looks like I start a new connection with numbers actually for remote control of my answering machine.
Hi, I'm also in the club that has browsed hundreds of post looking for a setup of VOIP and also looking for a solution on good incoming sound level when using Voip on phone. Your files solved all my problems!
Phone: HTC HD2 Norwegian with Rom 1.66. Use the Norwegian company www.iplink.no for VOIP at home / office and (now) on my mobile phone.
Made my own ipdialplan.xml which can be found attached to this post.
Done some testing calling people through Voip: after approx 1 minute the connection falls down. I looks like I'm still connected to the other part (interface shows that a call is going on) but none of us can hear the other part. I then have to cancel the call in the phone interface. Make new call to same person, after approc minute the connection goes down again...
Is there some kind of registry setting that controls this "timeout"?
Hi, this tools does work also on windows mobile 6.5?
I know that on the HTC Fuze some of the wmvoip.cab installs breaks the GPS - anyone test this yet?
THanks!
does this work on hd2
I've done everything you said, but I can't find the option to show internet calling is available. I have Kumar 1.5 installed, and am about to try another ROM (maybe Laurentis, the SIP drivers are cooked in). What are you running?
shah_vm said:
does this work on hd2
Click to expand...
Click to collapse
yes, it does!
Best Voip All in one solution. Try This
http://forum.xda-developers.com/showthread.php?t=596682
I tried last night to no avail. I am guessing that using a WM6.5.x ROM stops me, because I can't access the right settings (start-settings-personal-home or phone) because my settings button takes me straight to the black screen of text version. I even tried to go to a 6.5 ROM (cooked with VOIP drivers in), and even then I couldn't get the VOIP phone icon to appear on the today screen. Every time I selected it from the Internet tab in the setting, it would just ignore my changes.
I would love to get this working with a nice cooked 6.5.x ROM, and am not giving up yet, but man is this frustrating. As a side note, I am learning lots about the workings of WM.
sidelait said:
yes, it does!
Click to expand...
Click to collapse
thanks for the reply. i have also installed i was able to receive incoming call but unable to make outgoing call. are you able to make outgoing call?
Okay, I feel like an idiot, but I figured out how to enable the internet calling tab on my HD2. I am still apparently learning lots about WM6.5. After I disabled Sense, I could add tabs to the today screen. I did everything right, but the voip tab just either says searching or not active. And it somehow disabled my data connection. Not sure anymore, almost through trying ROMs. Is everyone else running this on a stock ROM, or are there certain features that interfere with this?
VOIP almost working
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
forepj said:
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
Click to expand...
Click to collapse
You need to edit your ipdialplan.xml. It's in your windows directory. Basically it is set up by default to dial a 9 and in area code 425... If you look at it you should see where to edit it... There's also a utility knocking about here to set up a basic one for other countries...
Can't svae ipdialplan changes
I can open Total Commander find the file and make the changes to ipdialplan.xml by taking the "9" out of the 10 digit plan and the 7 digit plan, but I can't save the changes. I get "Error, could not create file" every time.
It's either open or write protected. Edit on the PC. Copy it over with a different extension. Rename the original, and then rename the new one to the right name.....
I have this very strange problem.
I have tried to install all this, but it works only partially.
Outgoing calls work and the receiving party can hear me. However, I don't hear them. Also, on incoming calls my phone doesn't respond at all.
Does anyone have any idea what is the problem?
I'm having a Topaz @ WM65.
Hello,
first of all great site I have to say... got me a lot of help with my new HD2 (switched from Nokia S60 to WM)...
No I'm trying to get my HD2 work as an VOIP Client over pbxes.org.
I found the Cab Files to enable the Voip Settings Tab and the Config-Tool.
Installed both, configured and it's working!
Now I have the Problem that I can not choose wheter to make the Call over GSM or VOIP, It's always dialing over voip (when VOIP connected). There is no config tool/button for manila (HTC sense)...
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
I'm using Nimbuzz, AGEPhone and PortSip as well, everything works with wifi-connection.
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
thommy5583 said:
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
Click to expand...
Click to collapse
Try installing something like Second Today. You can enable the internet calling home screen item on it, flip to it when you need to and disconnect the Voip.
fiftyz said:
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
Click to expand...
Click to collapse
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
CanEpia said:
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
Click to expand...
Click to collapse
Thank you... Yes the problem was with dialplan. I solved now...
But i have another problems:
1) When I call a number via sip the dialer windows show last call and current call over eachother insted of current call.
2) I'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB on my Leo... Is working without the need of audioroute but I saw that this cab is for WM 6.1 and Leo has WM 6.5 Rom. I need VoIP_HD.cab?
3) Is there a way to make manila show also SIP operator instead of GSM when Internet Calling is available?
4) How can we change comm manager to change one registry value when button is turned off?
Hi did you managed to get the audio out the front speaker and not the back speaker
Or is this problem still the same
Service shows selected but no dialing
I have the same problem as fiftyz. What did you change in dialplan to correct? Could you share your dialplan?
VOIP ENERGY Leo ROM
Dear all I have searched en searched but didn't find a answer anywhere.
The problem is next:
I want to use VOIP on my TP2.
In the ENERGY Leo ROM VOIP is integrated.
I only download a SIPconfig tool to make it work.
But I don't get the speaker and the mic. to work properly.
Calling as a fact is working but then the people can’t hear my.
And I hear than only over the back speaker.
Does somebody know how to solve this problem??
sip voip solved
http://forum.xda-developers.com/showthread.php?t=596682
tested and working
works great
http://forum.xda-developers.com/showthread.php?t=596682