I had updated to WM6 recently and tryed with several VOIP SIPs.
Someone told me that there is a VOIP service in WM6 but don't know how to config it. Tryed Schaps VOIP Setup with no success.
And also tried SJPhone but I don't like it because you can't use the internal speaker (the same as for calls) to hear, only the external speaker as If I were using the music via windows media.
My intention is to make voip calls as if they were calls from the mobile normally.
Any incoming ideas? I would like to have this working soon
MiSSigNNo said:
Any incoming ideas? I would like to have this working soon
Click to expand...
Click to collapse
Cook your own ROM with pandora, include VoIP and voila. Find a SIP provider and your going.
Related
Im using voipbuster with SIP CONFIG TOOOL V2.0.1
my problem is any time i make a phone call it works fine however the other party im calling can't ear my voice but I can ear them fine.Is there any thing im doing wrong
hey..other than the voip setting soft..do i need other soft to make calls?
spore33 said:
Im using voipbuster with SIP CONFIG TOOOL V2.0.1
my problem is any time i make a phone call it works fine however the other party im calling can't ear my voice but I can ear them fine.Is there any thing im doing wrong
Click to expand...
Click to collapse
Can anyone give me the settings for voipbuster. am using SIP CONFIG TOOL V2.0.1. Thank you
Hello all,
I've been lurking around here for a while, and am currently running BR's latest 6.5 ROM.
Regardless of the ROM though (stock HP, Montecristo, or BR), I've been unable to get the internal SIP VoIP functionality to work using destr0's tool. I've tried 3 variants, and can never succesfully dial out - it tries to dial, then ends with "2621:29" as the call time.
Any ideas? Has anyone had success getting VoIP working with the 91x?
Thanks,
Colin
Dunno. My latest WM6.5 ROM (build 21815) has the VoIP packages included, but you have to enable the feature in the Phone control panel under the "internet" tab. Beyond that, I have no idea how VoIP even works on WinMo. Let us know if you make progress.
Thanks for your reply. I've tried a few variants of the VoIP provisioning tools that are floating around and referenced in the VoIP threads on here... Even when the VoIP shows as available, it's not able to dial and ends the call with one of a few symptoms:
-2621:29 in the time box
-unable to make call message
-letters and percentage signs where the dialed number was (to do with the ipdialplan.xml file???)
Cheers,
Colin
I've downloaded the latest fring windows mobile cab and installed it, but when I launch it - nothing happens.
I'm trying to get my google voice to integrate with my phone.
I have a Gizmo account and using Nimbuzz, I can dial out from
voice.google.com and talk over my TP2, but I can't use for instance iDialer to call out. I did set up my gizmo/google voice callbacks for iDialer.
I can't answer incoming calls over nimbuzz either, I answer but cant press 1 to accept the call
edit: disabled the "confirmation" on google voice but now it just keeps ringing even after answering?
I'm using Energy Leo WM6.5.3 ROM
Any help would be much appreciated!!
edit:
Been looking at why it wont work all morning, some say HTC Messaging, some say Sense 2.5, some say it flat out won't work with Energy Leo... o.0
bump.
i cant call out via idialer, i can dial out via gv web interface.
i cant answer incoming calls, only dialed out calls
my incoming sound isnt friendly except speakerphone (bluetooth/earpiece/headset i cant hear, but the other person can hear me)
edit:
got my SIP set up in the registry for WM InternetCalling, just need some codecs now and i need to test iDialer more.
Hello,
first of all great site I have to say... got me a lot of help with my new HD2 (switched from Nokia S60 to WM)...
No I'm trying to get my HD2 work as an VOIP Client over pbxes.org.
I found the Cab Files to enable the Voip Settings Tab and the Config-Tool.
Installed both, configured and it's working!
Now I have the Problem that I can not choose wheter to make the Call over GSM or VOIP, It's always dialing over voip (when VOIP connected). There is no config tool/button for manila (HTC sense)...
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
I'm using Nimbuzz, AGEPhone and PortSip as well, everything works with wifi-connection.
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
thommy5583 said:
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
Click to expand...
Click to collapse
Try installing something like Second Today. You can enable the internet calling home screen item on it, flip to it when you need to and disconnect the Voip.
fiftyz said:
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
Click to expand...
Click to collapse
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
CanEpia said:
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
Click to expand...
Click to collapse
Thank you... Yes the problem was with dialplan. I solved now...
But i have another problems:
1) When I call a number via sip the dialer windows show last call and current call over eachother insted of current call.
2) I'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB on my Leo... Is working without the need of audioroute but I saw that this cab is for WM 6.1 and Leo has WM 6.5 Rom. I need VoIP_HD.cab?
3) Is there a way to make manila show also SIP operator instead of GSM when Internet Calling is available?
4) How can we change comm manager to change one registry value when button is turned off?
Hi did you managed to get the audio out the front speaker and not the back speaker
Or is this problem still the same
Service shows selected but no dialing
I have the same problem as fiftyz. What did you change in dialplan to correct? Could you share your dialplan?
VOIP ENERGY Leo ROM
Dear all I have searched en searched but didn't find a answer anywhere.
The problem is next:
I want to use VOIP on my TP2.
In the ENERGY Leo ROM VOIP is integrated.
I only download a SIPconfig tool to make it work.
But I don't get the speaker and the mic. to work properly.
Calling as a fact is working but then the people can’t hear my.
And I hear than only over the back speaker.
Does somebody know how to solve this problem??
sip voip solved
http://forum.xda-developers.com/showthread.php?t=596682
tested and working
works great
http://forum.xda-developers.com/showthread.php?t=596682
My wife and I are getting ready to go overseas and we both have HD2's. Is there a good free VOIP app that we can use?
Thanks in advance.
`swamp
Skype for HD2 still works.
Download the cab, install it.
I haven't tried with Wi-Fi, but it works great with 3G.
I also used Skype, but only one bad issue occurs when run on HTC HD2 - output sound from rear speaker. Now I use fring, which supports Skype, plus some other communication protocols.
Skype is *not* really a voIP.
You can use fring - however it doesn't have DTMF support.
Might want to check into this:
http://www.ageet.com/us/products-agephone-mobile.htm
...or you can simply use the native dialer and the windows mobile voip - but getting it installed & working properly is a little tricky so the agephone one (although not free) might be your best bet.
talkonaut
talkonaut is a good one havent really used it yet tho