Hello
I just bought the dvanced screen protector from proporta http://www.proporta.com/F02/PPF02P05.php?t_id=4033&t_mode=des
, but unfortunately after I applied to the screen , I couldn't tap on it ?
Did u use it before ?!! and what do u think the problem ?!
I tried to calibrate the screen again , but It didn't work !
please I need ur consultations
check if you can use the touch screen on WM6 /Snap view , if you can then good news , all you need is to restart your vista or fall back to last restore point.
If you cannot use the touch screen on Vista and WM6 side , remove the screen protect and try ... if it works ...you are safe...atleast your shift is working fine.
if it doesnt work after removing screen protect , contact HTC service.
cheers
Related
Dear all...
i have i-mate jam i try to do it align screen but i can't caz i try to but the pen in + and the i-mate replay agine and can't completing the align ..so please can any one tell me how to solved this problem ...
respactfully
please no bady tell me about this problem
Have you tried a soft reset?
Take thin plastic card & try neatly conduct between screen & body at all perimeter, clean rubbish! if after won`t working, change "touchscreen"
thanks to Every one replay to me ......the solved i try to removed the plastic screen but the same problem ...
respactfully
can you tell me if the problem is with the center point or+
hi...i do have same type of problem with my 02 xda. After hard reset when i try to allign secreen at centre point,it doesnt move at all.It seems as if centre point has gone dumb while all other four corners do respond to tapping.This way my magician is stuck at secreen allignment.I am very much frustrated...can you heklp me out? thanks
I have same problem
it can be solved if you are using external power then ur ppc will align the screen.
bro ...clean the tach screen under the cover ..
same problem in my magician i v tried to flashing ROM but it still blocked in align screen
Hy everybody.. today i've bought a qtek 9100/spv m3000 from a guy...but when i've opened the phone.. he says to "aling scree" and in the center of the screen is a target...when i tap in the middle of the target..nothing happends.. just when i tap in a corner.. and after that if i tap.. the middle of the target.. it moves.. but it does nothing.. when i tap it in the center of the screen ( why.. does somebody knows.. why ? or how to bypass the screen align ? please.. help..
Come on.. nobody knows nothing about my problem ?
You have to align the screen in both directions (horizontal and vertical). After that it should work...
zuzuzuzu said:
Come on.. nobody knows nothing about my problem ?
Click to expand...
Click to collapse
got a similar problem. You probably have a dead spot in the middle of the screen, like me. You gotta try and get as close as possible, but then on every other marker you gotta hit it in the same spot.
If it won't go to another marker do a hard reset or try a different rom.
U don't understand.. almost 1cm and 1.5cm from the middle of the screen doesn't work .. im sure that the digitizer of the lcd display is broken ..
uninstal FTouchFlo and softreset. work 100%
I have had this issue also on an O2 Mini S, luckily it happened 1 month before the warrantee ran out.
I noticed the screen was getting a little unresponsive in the center of the screen and then I hard reset the device before it was sent back to O2, after this I couldn't even calibrate the screen.
It was replaced in the end.
Sorry, good luck.
D.
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
hello
do the screen alignement , it helped for me
grtzzz
you can find this in settings___system ___ screen and choose align
Like I said, I already did the re-alignement. But it didn't solve my problem.
touchscreen problem
hello,
u can try to update the rom , maybe that could be a solution , you find it in the wiki of the prophet on how to do it
grtzzz
grey
dizzy33 said:
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
Click to expand...
Click to collapse
Well it is very likely that your touchscreen is damaged but not your LCD. There is actually 2 portions to the screen which most ppl assume there was only one(well I did initially until finding out later when my screen broke and got it replaced). Anyway, if you've tried re-calibrating it and doesn't work..maybe your screen protector (if you do use one) maybe be at fault? Other than that, worse case scenario, it is your touchscreen that is physically damaged. FYI it is not really expensive to replace compared to the LCD part.
Speak to njbridges if you need to get it replaced.
http://forum.xda-developers.com/showthread.php?t=323981
I already upgraded the ROM to latest french version ... It didn't help in that.
Anyway, thanks a lot for your answers !
I had the same problem. Unfortunately it was a problem with the touch screen which was fixed under warranty.
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
beer2nd said:
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
Click to expand...
Click to collapse
Hello.
I tried to do that, because I had problems to align screen.
I changed the touchscreen with another from a broken LCD. But now all I can get is a white screen, then a sound (like the starting sound when you make a hard reset or remove batery) and after black screen again.
What can I do to bring it back.
I've noticed that the touchscreen had some white glue where is the connection with the LCD. Do I need to replace that glue, maybe is a special glue with small voltage conductibility ? Or ? Help!
Anyone changed the touchscreen ?
PS: I think I will start a new post, maybe I will get some answers!
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
P4k1t0 said:
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
Click to expand...
Click to collapse
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
saxxen said:
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
Click to expand...
Click to collapse
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
P4k1t0 said:
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
Click to expand...
Click to collapse
When you say cut it means that a part of the conectors still remain on the touchscreen (under the touchscreen). Or no conectors at all on the touchscreen and that means you removed the connectors (pulled out).
Do you know if I have any chance to take another touchscreen from a defect device and work ?
hello
i have a problem whit my prophet touch .
when i tap a part of screen that not work . i capture it and i upload it.
first a bit of screen didn't worked .but after a day it gtow more.
what can i solve this problem ?
sory for bad English
http://forum.xda-developers.com/attachment.php?attachmentid=89338&stc=1&d=1212314176
http://forum.xda-developers.com/attachment.php?attachmentid=89339&stc=1&d=1212314176
you should try to hard reset or flash with other rom.. if it doesn't work i think you should sell it.. coz if the one broken is the lcd, it will cost quite expensive..
I had the same problem. Some parts of screen did not work. I had to send it to the repair service. And they have replaced a new screen.
Probably you need to do the same.
thanks
don't another way ?
saeidba said:
thanks
don't another way ?
Click to expand...
Click to collapse
Maybe dust inside your LCD... Like my, the tech guy says too much dust in my LCD...
First of all, the LCD has nothing to do with the touch screen.
It is a separate thin layer on to of the LCD called the digitizer.
It should not be as expansive to replace, but before you send it to the lab, try the following:
1) If you have a screen protector of any kind remove it.
2) See if you can get to Start->Settings->System->Screen->Calibrate
(maybe using hardware keys or some kind of remote control app)
Try to recalibrate the screen.
3) Try to hard reset your device (make sure you backup all data first!) by holding camera and comm manager buttons (on the left side) and pressing reset.
If non of that works you definitely have a hardware problem (possibly a loose connection) and should send the device to a repair shop.
Changing ROM is unlikely to solve this problem and will only void the warranty if you still have any.
the cursor moves but putting me back to align again.
does someone can give me : [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"=",,,,, "
Thx
My device has the following settings 516,534189,886196,192833,189836,887
But these are individual settings. To my mind you have to align for your own.
Are you sure you did it with the key? i have heard from ppl using their finger to align
Jahassie80 said:
the cursor moves but putting me back to align again.
does someone can give me : [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"=",,,,, "
Thx
Click to expand...
Click to collapse
tnx for your reply.
Cant align at all even with a stylus or finger
tried your settings tho, doesnt work. strange isnt it .
Well damm Touch hd .
align screen
I had the same problem but found I wasn't holding the stylus long enough on the cursor. You need to press quite hard and longer than a tap.
Sounds like your Digitizer is broken. This same problem (alignment loop) happened to my Dell Axim X50v a few years back.
The digitizer is what overlays the LCD screen to enable the touchscreen functionality, they can go faulty.
I replaced mine myself on my Axim, but I wouldn't void your warranty on your Touch HD, get it repaired by HTC as it will be covered by your warranty.
had exactly the same problem with my first one, was like that the day I received it.
I just got it replaced straight away no worries.
tnx for the reply`s
Still doesnt works.
pfffff It did work before tho.tried to edit the calibrationdata but it seems not to reply to that.also tried different roms.offcourse I made the welcome.not file in the sdroot.
Why?? Why???? ((((
made a new friend tho Mymobiler for messaging
can more people give their calibrationdata ???
I have noticed that every rom has his own data.
Tnx
What use is there in getting other peoples calibration data when you have a broken digitizer? Just send it in for repair, or get it replaced if you haven't had it very long.
your a right , always having the focus to fix stuff its a habbit.
Sending it out for repair tho .
Thnxxxx