Hello,
I just bought motorola s9 stereo headset but have problems with finding it with xperia blutooth, they cant see each other?? I am doing it by the propose from the manuals and problem is still there
please help with some suggestions??
cheers
i got the s9 and it sometimes doesnt appear when i try to search for it. so i just turn off then turn it back on and search again and there it is. this happens with a bunch of other devices too.
Related
Hi,
I've recently purchased an xda 2 from O2 it came with a free bluetooth headset, but I've a few problems and wondered if anybody could answer a couple of questions.
1. The little blue flashed LED, is it meant to flash all the time that bluetooth is being used? It seems to start flashing and then just stop.
2. When I go into my bluetooth settings and turn it back on when it's switched itself off I don't get the LED flashing then I go back into the settings again and it says that it's off. Is this what it's meant to do?
Any good guides/tools about using bluetooth with this device?
Beginning to pull my hair out and I've not much to spare!
Cheers
Marc
Free? from O2? how?
1stly howd u manage 2 get sumit out of O2 for free? i would be worried about that allready!!
what bt Headset did u get? with mine, i get a blue light flashing intermitently when the headset is turned on, and it doesnt change when im making a call.
which bt settings are you talking about? obviously you need to have bonded with the device, which the headsets instructions should cover.
to turn bt on the phone on you click on the bt icon at the botom of the active screen and select the On radio button.
if headset profile is enabled then there should B a small blue headset symbol next to the bt symbol, if its not set, or not turned on then it will be gray. if it is gray then click on it and hopefully it will turn blue to activate the headset profile.
there are sum interesting bt tools around, but the "recomended" setup is the Pocket Bluetooth Tools for the O2 XDA II and the MDA II which is available from here:
http://bluetooth.i-networx.de/index_e.html
I hope that helps.
Smiley
sounds like you are using bluetooth tools and have got the clock symbol live (not greyed out), it times out the internet connection but doesnt seem to tell o2's software that it turned it off so when you go in, it quite often seems to think its on when its actually off !!
Hi, I didn't have the bluetooth tools loaded, but I've downloaded them from the site you suggested and everything seems to work better.
The headset did indeed come free from O2 I was quite surprised too.
I've think I've attached an image of it, not sure what make it is does BlueTrek sound good?
Yeah that sounds about right, their website doesnt actually give any details, helpfull as allways!! :roll:
neway, have u got everything working properly now?
Smiley
Hmm...somebody had the same problem with his Bluetreks G2 and the XDA2.
He did a special pairing mode and it solved the problem.
I think its in the G2s instruction manual.
Had a look at the manual can't see anything special in the way that you pair the G2 to the XDA2.
Do you use this bluetooth toolkit?
It still seems flaky, I tried answering a couple of calls with the headset yesterday and nobody could here me at the other end of the phone. Sometimes I get it where the phone says that I have "no bluetooth available" I have to remove the battery and insert it again. Is this normal?
Regards
Marc
Marc,
I get the same symptoms you describe when I'm using ActiveSync with my XDA2 over bluetooth, but never with my HBH-65 BT headset. I'm not using any additional bluetooth tools or anything like that. Just the standard built-in bluetooth on my original (November 03) ROM.
Sometimes if my bluetooth ActiveSync connection is idle for a while the connection drops and the flashing blue light on the XDA2 goes out. However, if I tap the little blue BT icon at the bottom of the Today screen, the setting shows that BT is still turned on. I have to tap it on, then off then on again to cycle the status and convince the machine that bluetooth is really back on again. :? This sounds like the problem you describe.
However, no problems like this with my BT headset, which works perfectly.
This isn't any help, but at least you know you're not alone!
Does anybody know if a registry entry exists to turn the bt headset profile on and off?
I've got headset working now but it switches off frequently.
Cheers
Marc
I have a BlueTrek G2 for my Imate and it's working with no problems at all ... I tried BT tools but didn't find it useful as I thought it will give me a "Hands free" profile but it doesn't :x
mokl: maybe it's a ROM issue ... mine is 1.72 WWE, what's yours ?
The rom version is 1.60.00WWE
Just to let everybody know, I had some major problems with my bluetooth on my XDA 2. Tried everything, eventually got a replacement from 02 and the new one works fine now, so it must have been a hardware fault.
Hi All,
I have been reading a lot of messages on both 8525 and 8125 trying to isolate the issue and there doesn't seem to be a straight asnwer anywhere and hence I am trying to get the attention of the users here...
I have a pioneer navigation system with a bluetooth built-in. My previous phone (blackberry) and my wife's treo650 both stay connected with car's bluetooth when on call (never a disconnect). But my new 8525 gets disconnected mid-call (usually after 2 to 5mins, but have also seen a disconnect within 1min). That is, it does pair with the car kit and when there is no call going on, the bluetooth connection never dies. This disconnect only happens mid-call, almost all the times.
I have the latest ROM (1,34.502...., radio: 1.16), got the phone about 2 weeks ago from Amazon.com. Called cingular and they say could be faulty phone and I have searched other forums like audi message board where their car kits are also having the same disconnect problem with 8525, so I doubt this is a single phone issue.
I have taken the 'band' hack and forced the phone to be in either GSM or WCDMA mode and in either modes, the phone still exhibits the same problem (there might not be any connection between the two at all, bluetooth with GSM/WCDMA, but thought there might be some weird connection...but not the case thankfully).
I read somewhere about some bluetooth tweaks on 8125, but never found what those were. I need some help here otherwise I am going to return the 8525 and stay away from it. I need the bluetooth to work efficiently.
thanks for all your help
Phal
San Jose, CA
please help
I really need some help, clue or direction on solving or at least isolating this bluetooth issue. I love the 8525 but if I cannot fix this bluetooth mid-call disconnect issue, I will unfortunately have to return, which I don't want.
What headsets the 8525 works fine with (no drops mid-call)? May be that is a starting point.
Please also give me some links to 8125 tweaks that some talked about? pof/other moderators/anyone?
thanks a lot in advance!!
Phal
I have an Motorola H700, and every once in a while it will disconnect, looking at the phone after that, BT is turned off, turn it back on and it works again...
There are problems with the hardware and the API used to access it, good phone, but I don't think it was ready for the market yet when they released it. It is likely to be corrected in the next ROM release, last I heard from Cingular is mid 2007, but by the way things go, prolly around late 07/early 08.
I'm having similar issues with the BT headset I use, which is a Samsung WEP150. It'll drop midcall to the handset. I'll look and BT is turned off.
The only remote correllation I've found is that it seems to occur when I've received a new email or something a la ActiveStink.. And I haven't really been able to confirm that... But I have definitely noticed it happening then though.
my 8525 does this as well with my factory BT in my 05 Acura TL. Kind of frustrating, have not been able to figure it out yet.
Problems w/ Audi BT as well
Same issues with my Audi Q7 BT. I have seen posts in this and other forums blaming the MS bluetooth stack.
My 8525 worked flawlessly with my Garmin NUVI 660, never disconnected or failed to connect automatically. This is frustrating.
8525 Fix
I had the same problem with the 8525 and my Pioneer Avic-Z1 bluetooth kit.
I hacked the registry to force the bluetooth radio to stay ON, rather than going into sleep mode. This seems to have fixed the problem (although with limited testing at this point).
My calls would consistently disconnect with 2-4 minutes. After the hack, I've had 2 45-minute+ conversations with no trouble.
Here's the fix... install a registry editor (like PHMedit), and add a DWORD here:
HKLM\System\CurrentControlSet\Control\Power\State\ Suspend
Add a DWORD called btl1: (note the colon, the colon must be there), with a DWORD value of 2.
Good luck!
My Q7 as well i took the advice of wolfgram and did this to my phone i will let you know how it works it would be a shame to give up this phone but it is really useless if this feature does not work right.
Well this is what i did i did what wolfgram said and it still cut out but not as much so i took the checks off in the advance power mode and never let the phone go to sleep and it works all the time. HTC needs to upgrade thier bluetooth setting not to go to sleep. It must stay active at all times MY phone book and all other info posted into my Q7 with no issues at all and it even sees the bluetooth b4 the MMI system in the car Boots up..
Lance
Resolution I think
I turned off 'Making device discoverable to other devices' and it seems to have solved this problem, I am using the phone with a parrot kit and it kept disconnecting now it works all the time.
Treo 750 doesn't have this problem
Well, hopefully you owners of Hermes have figured out the fix. I had to return it and now got the Treo 750 and can gladly say the problem is not there. The treo 750 has the v1.2, but I guess following the replies here, that possibly Palm fixed the problem by keeping the BT radio on at all times.
In any case, here is the post I wrote in avic411.com forum - if you want to see any follow up responses by other owners..
http://avic411.com/forum/viewtopic.php?p=24170
cheers
Phal
Bluetooth cut out
I am having the problem too with the garmin Nuvi and the Tytn - which is ineresting seeing as how one poster had no problem with the Garmin device. Here is something else that is interesting - I did not have the problem when I had the HTC 1.18 Rom installed. After I flashed the HTC 1.35 Rom, the problem began. I have already tried upgrading my firmware on the Nuvi - that did not help. I also use a Nokia 800 bluetooth headset - and that never cuts out with either ROM. I will try turning off the bluetooth discovery first. If that does not work, will try editing the registry. Keep you posted.
Turning off bluetooth discovery did not work.
Turning Off Bluetooth Did Not Work For Me Either
this worked for me.....
http://forum.xda-developers.com/showthread.php?t=247520&page=10
drains the battery quicker, but no more bluetooth problems.....
Hey guys, has anybody found a solution for the auto turning off of the BT in suspend mode? its gettin really annoying
I have an MDAVario 2 and I have never upgraded the ROM etc. so it is as it was sold when they first came out - not cooked etc.
I used to use a motorola bluetooth earpiece but I haven't used it for ages. I cant get it to pair and I have no idea why. The device isn's seeing the headset. Can someone take me through the steps and any obvious pitfalls as I really need to sort this out.
thanks so much
Motorola's website has walkthroughs for setting up every bluetooth headset that they have ever released. Start there.
I'm afraid its the link between my dvice and my earpiece I can't establish. I know in theory how to do it. My devie can discover other earpieces and other devices can discover my device but my two aren't finding each other despite the fact that they used to - any tips.
Dear all:
I am using a GSM version of HTC Snap/S521.
I have used many bluetooth headset/stereo along with Snap before:
Motorola S605
Motorola HT820
Logitech Pure-fi Mobile
and
Motorola S705
Motorola S705 is the only one that give me trouble.
Upon inactivities, either at the moment of sleep or wake up, S705 will TURN OFF MY BLUETOOTH ON MY PHONE and get disconnected. I will *NOT* be able to turn back on the bluetooth on my handset. I can try. But first attempt will result in bluetooth being turn off automatically immediately. The Second attempt will crash the bluetooth connectivity altogether by stuck on that waiting for bluetooth be turned on screen. Only a soft reset would resolve the problem.
Bluetooth compatibility is a difficult problem and it's hard to lay the blame on either party. I harassed Motorola and get my S705 replaced, but the problem persists. I let my friend to borrow my S705, connecting with Palm and Nokia device and they don't suffer the same issues.
The purpose of this post is to warn people that, in case you are thinking about getting a Bluetooth headset, avoid Motorola S705. It's not because S705 is a bad device, it's just that it got compatibility issues with My Snap
Of course, if any of you knows some bluetooth registry tweak that might resolve the problem, do let me know.
Thanks in advance
Harv
Dear friend
I have a Samsung Galaxy Tab Model GT-P1000L and no detectig my Bluetooh headphone S10 HD Motorola, simply no show up on the list of detected device.
Please, help me
Thanks
Please help me. I can't show the headphones, thanks
Weird, mine works just fine
Odd, it works perfectly for me as well. Best bluetooth headset I've ever owned.
Have you followed the instructions that came with it? Where are you going wrong? Some more information could be helpful.
but my Blackberry 8520 good work with the headphones, the problem is for Samsung Galaxy Tab only.
Please any idea?
Thanks
Mirko
To turn on the headphones you have to really mash down on the on button for 10 seconds. Are you sure its on?
I have same problem with galaxy s. Tried all recent modem bins. Never shows up. I speculate it is because they are both ad2p v3 devices and there is a failure with the newer mode. Works fine with s9-hd though.