I HAVE A PPC6800SP, IT ENTERS THE PHONE...IF I LEAVE IT ALONE IT KEEPS ON WORKING, BUT IF I TRY TO OPEN ANY APPLICATION IT FREEZES AND I HAVE TO TAKE THE BATTERY OUT AND PUT IT BACK....
WHEN I ENTER THE BOOTLOADER, THIS IS THE INFORMATION I GET:
TITA100 MFG
SPL-2.40-Olipro
CPLD-9
CAN ANYONE HELP WITH THIS?
reflash or do a hard reset. I think you have some software conflicts.
I did already
drewcam888 said:
reflash or do a hard reset. I think you have some software conflicts.
Click to expand...
Click to collapse
i flashed and did hard reset several times... and no success!!!
what rom do you have
Related
hi every friend,
please help me, i was update my xda to ppc2003 while computer was down, that cause me have to restart it, after that my xda dead, i use hadr reset it says gsm ok, then start a set of test like,ram, usb, sound,sd card. then stoped. can someone tell me how to fix it. thanks a lot, i really need that pda.
hard reset doesn't lead to these diagnosis ... are you sure you didn't go into the boot loader mode ??
only hard reset will cause nothing, i use hard reset and power key come out the bootloader svreen says" gsm ok" then i press action key, it start test
this means "soft reset" ... the hard reset is the small hole with red battery icon.
Anyway, having "GSM Ok" is a good news ... all you need now is to try HARD reset ... and if it doesn't work, you may flash your ROM with a new one using SD card if your boot loader version is older than 6.22
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
I think you can do a hard reset by holding the "power button", "end key", and pressing the reset "pinhole" at the same time.
foxatphoenixlabs said:
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
Click to expand...
Click to collapse
have you tried getting into bootloader by pressing power/camera/reset?
when did this start happening?
The same thing happened to me today... Im frozen at the htc smart mobility boot up screen and nothing works!
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
raybond25 said:
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
Click to expand...
Click to collapse
I think I have same problem.
Anyone have a link where I could find that & install instructions to make sure I don't screw up more?
This happened to me too. I ended up having to reflash it like everyone said.
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Hannoe said:
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Click to expand...
Click to collapse
You are in the wrong section altogether. Go to this part of the site http://forum.xda-developers.com/forumdisplay.php?f=631
@OP,
First things first, did you unlock the device before flashing? Also, are you sure that you have a Vogue and not an Elf/Elfin?
A quick way to get out of your issues would be to try to flash the phone back to stock. Put the device in bootloader mode and flash a stock rom for your device.
Installed SPB Backup and ran the option to make a self extracting .exe file to the SD card. It did a soft reset and now it does nothing.
It switches on and sits on the Sony Ericsson startup screen and thats it.
Any one know how to start in safe mode or get it back to the way it was?
sounds strange, i used spb backup million times and no prob at all.
hard reset, then try to restore your backup
First try with hard reset. If that don't work try to rom
borce_razor said:
First try with hard reset. If that don't work try to rom
Click to expand...
Click to collapse
Hard reset does nothing, still sitting on SE startup screen.
did you correctly made it? did yuo see "press spacebar to continue"? Sounds strange...
guap said:
did you correctly made it? did yuo see "press spacebar to continue"? Sounds strange...
Click to expand...
Click to collapse
I did it on the phone, then it does a reset and thats the last thing that it did.
I've tried fixing it with mtty.exe
I ran the following commands:
set 16 0
set 14 0
boot
It reboots but it's still the same. In boot mode I get:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
SEUS says my software is up to date.
What else can I try?
I don't understand if you already made an HARD reset (button combination + R on keyboard) or not...
anyway, your bootloader seems still ok, you can flash a rom with sd method. check the sticky
Hi i have a slight problem.
After installing NYDITOT (sounds like idiot..) Virtual Display, Version 5.02 my htc hangs on smart mobility screen. I tried a soft and than hard reset, but that won't work.
So it thought i try Flashing and changing the device to a new version..
I can start the device in the bootloader screen (thats the only thing i can do at this moment..)
This is wat i see:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
and then serial or usb (when i plug it in)
But than after trying HardSPLWrapper_Blackstone.exe the screen on the pc aswell the screen on the htc stays on 0% and eventualy (after a minute or so) it looses the connection.
(Error 262, communications error)
Then i tried to acces the device though MTTY and this is what i get..
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCE
Cmd>ruurun 0
Command error !!!
Cmd>
hmmm..... help?
Please some help guys, i am running out of options here.
Luckly my Blackstone is realy old.. 1 week
Many thanks!!!
You should check if you have the correct usb drivers installed if you are running a 64 bit system. Also try installing the latest version of mobile device center. Check the troubleshooting section in http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1
tnx for replying
i have tried it on XP-home, XP-professional and Vista. All different pc's..
All gives the same problem as mentioned...
Flash new Rom
Only think I can think of is to boot into USPL and flash a new Rom
Toggs said:
Only think I can think of is to boot into USPL and flash a new Rom
Click to expand...
Click to collapse
Sorry mate, but this is all I can think of as well. Try flashing a new ROM.
Once ROM downloaded, Start BlackStoneCustomRUU.exe and follow the onscreen instruction's.
I'm assuming of course that you already have flashed HardSPL previously?
Hard reset should be sufficient to remove the faulty piece of software for good.
Fallen Spartan said:
Sorry mate, but this is all I can think of as well. Try flashing a new ROM.
Once ROM downloaded, Start BlackStoneCustomRUU.exe and follow the onscreen instruction's.
I'm assuming of course that you already have flashed HardSPL previously?
Click to expand...
Click to collapse
I have not flashed HardSPL previously, i bought it one week ago and just installed a few proggs including that IDIOT virtual display..
So i don't care is i lose the data thats
Can i still try flashing a new ROM even without a HardSPL?
tnx!
stepw said:
Hard reset should be sufficient to remove the faulty piece of software for good.
Click to expand...
Click to collapse
indeed thats what i thought.. however it did not
unimatrix001 said:
indeed thats what i thought.. however it did not
Click to expand...
Click to collapse
Did you Clear Storage of physically Hard Reset?
tnyynt said:
Did you Clear Storage of physically Hard Reset?
Click to expand...
Click to collapse
pfff i feel such a NYDITOT myself, after watching youtube how to HARD-reset a blackstone for dummys, i saw the guy repete it several times when it actually reset itself.. same here also, but it worked
Anyhow it works again jippi!!
thanks everyone!
A dead HD; somebody to reanimate it?!?
Hello guys!
I have synced my HD several times. I have installed also a lot of software (sktools, pocket mechanic, memaid, and other).
The same programs run to my TyTN2 without any problems for more than a year.
After a soft reset it stacked to the start screen (smart mobility).
I have tried even several hard resets; the message appears for factory settings, the hard reset is getting done, but after that the same problem appears again.
I have tried also to flash it, but when i plug it to my PC nothing happens.
I turned it off by removing the battery.
R:1.09.25.14, G: 52.49a.25.26U, D: 1.14.22273
Please somebody helps.
I have searched the date base in the site, but i found nothing relevant.
My titan keeps soft resetting on is own, it'll boot up to the splash screen the all of a sudden soft reset by itself. can anybody out there help?
DO a hard reset. Did you just install a custom rom or radio?
I did a hard reset, and its a custom ROM but i've had it for months. This just started today
I say reflash everything
just did, still same issue, i even did a new ROM. the phone didnt soft reset at all while i had it in bootloader mode
Then I say a hardware failure and time for a replacement
Any idea on what might be causing it?
A hardware failure. Some chip on the pc board is going bad.
Thanks man.
I had flashed a ROM on my wife's Mogul awhile back and it has just started doing the SAME thing... random soft resets... so before blaming hardware there might be a reason why multiple people are having this issue....
Have any of you tried this out yet.
http://forum.ppcgeeks.com/showpost.php?p=549004&postcount=2