Hi. Please I need your help because I don't now if my PDA is broken, I had spent all my money for few days to buy me a hw6915. I tried to change the language German to Spanish the realized steps have been the following. - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative.
please can you help me to repair or finish the process.Thank you very much in advance for your cooperation. and sorry for my bad english
[email protected]
Related
So I now this is a very old topic but i'm trying to change my mini from german to English, I downloaded the english software and now what???
Please somebody try to help me as ditailed as posible.
Cheers!!
Now you send me some money & I will have a very nice Christmas with a new device
Ok now serious:
- download maupgradeut_noid from the ftp & put it in an empty dir.
- unzip the english shipped-rom to the same dir.
- make a backup of everything you want to keep from your magician
- connect via usb
- execute the maupgradeut_noid twice
first execute produces an error, second should finish like an ordinary shipped-rom upgrade.
When you see the new splash after the hard-reset: smile & enjoy your english device.
Cheers, m
Hi. I have got MDA-1 from T-mobile. I'd like to change my language in to english. Will You be so kind as to learn me step by steh how I should to do with this change? I've got usb cabel and device. Thanks for Ypur kindnes.
http://forum.xda-developers.com/viewtopic.php?t=6628&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=5740&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=5213&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=2969&highlight=change+language+english
http://forum.xda-developers.com/viewtopic.php?t=313&highlight=change+language+english
One of them should clarify.
Otherwise use the searchbutton yourself....
Stefan
I'm new at this sort of things and I dont understand some of those instructions. I wrote I'd like You to tell me step by step if u can.
It depends on your currently installed ROM, but normaly this should work:
1. Download new ROM from http://wiki.xda-developers.com/index.php?pagename=ROMVersions or http://www.romkitchen.de
2. Make a hard reset of your device
3. Reconnect your device via ActiveXync (You can use guest partnership)
4. Run the downloaded exe file an follow the instructions.
5. Enjoy your new language
All this has been told hundreds of time.....
Stefan
Which of ROM'a will be the best for my MDA? I have current ROM version 4.00.33 GER. Where I have to run my exe file ? on PC or PPC ?
OK. I have done it Thanks for help I'm so grateful
I've done it but now my MDA doesnt connectong with my PC. I have not got on MDA any communication program. I've got nothing !! What should I do now ?
Hi everyone ...
Please Help Me for This Error
When I Upgrade "O2 Xda mini s" For Change Language Germnay to English
I try this Step by Step
1 - Install Active Sync 4.2
2- Connect My Handy To Pc
3- Run Upgrade File in my Pc ( download from this site )
4- When Going to Install in the last Part type this error " Vender Id Error "
Please Help Me for this Error
I Real need to Change Language Germany to English
Web Master www.ShirazMobile.com
[email protected]
thank You For advertence
Hello,
This is my first post on this forum.
Im new to the Pocket Pc's. I got this T-Mobile MDA II from my friend 2 days ago and that was the first time in my life when I touched the PPC.
I have a big problem.
MDA II is not reading the SMS (''the phone is not ready, try again in 15min'').
And another problem is GPRS. MDA says ''connecting'' or something like that, and nothing happens.
The PPC is from Germany, and I live in Croatia. And the language is in English-Germany.. Something is on English, something on Germany.
Can someone explain what's the problem ?
And another question
I download the WM6.1 AKU1.0(build 19199).
I can't get to the Bootscreen mod, I click the middle navigation button, then power button and nothing happens.
And where is the reset button ?
Sorry for my stupid questions and bad english.
But I need some help.. Please!
Please!
I need someone to explain how to install ROM on MDA II.
the reset button is on the left of the charging block ( tiny hole )
follow these instructions
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading ROM Image, please wait....',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
===========================================================================================
PS: Upgrade on your own risk
omg this is amazing...
ather90 thank you very much!
6.1.1a16CS (WM6.1 AKU 1.0) ROM is great.
I can now use my camera, use gprs, use internet..
Wonderfull
good that you finally succeeded. now try 6.1.1b16CS (WM6.1 AKU 1.0)
usb craddle or usb sync cable ?
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
hagisbasheruk said:
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
Click to expand...
Click to collapse
This is also my 1st post here. But I'd been monitoring the xda-developer forums for a long time. I spend more time reviewing posts rather than posting in forums. Anyways I think I can help. Here's the answer to your question: http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing. You can also use the search function provided by this website to search for topics that you need.
Thanks for the link which lead me to bootloader info below
"you can connect to the bootloader, either via a serial cable, and use a terminal program like hyperterm. or via usb, and use mtty. make sure you have disabled the serial or usb connection in activesync, before trying to connect to the bootloader."
So i am guessing its both USB CABLE or USB CRADLE got i just purchase one on Amazon for 90 pence
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
g_spot said:
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
Click to expand...
Click to collapse
here are the XDA mini s WM6 pages http://forum.xda-developers.com/forumdisplay.php?f=356
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
pinkfluid said:
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Click to expand...
Click to collapse
Your Qtek wait a new installation of ROM, re-install the original rom completely (See Universal Wiki from this site).
After this unlock completely your UNI (See the Wiki too). Execute ALL the procedure (don't forget steps). Upgrade of bootloader is not necessary in some cases.
Install the new ROM...
Your device is not briked yet, but in bootloader mode if your battery is low, you can't recharge it...
pinkfluid said:
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Click to expand...
Click to collapse
Have you tried the "Mtty"(HTC)??
Kill the Activesync .
Open Mtty, chose the usb(you must kill the Activesync that it will appear)
than fill "task 28 55aa"
hope you!
Have you tried the "Mtty"(HTC)??
Kill the Activesync .
Open Mtty, chose the usb(you must kill the Activesync that it will appear)
than fill "task 28 55aa"
If successed, you can go on to upgrade.
I am not sure it will be work ,but in my Exec , it can work!
i did this on my mda pro, basically you just need to connect the usb cable (to phone and computer)
the serial will change to usb then you can reflash.