I am connected to the computer on the cable.. but the phone does not recognize that its connected through USB.
any help would be appreciated. tried on 2 computers!
Does your computer recognize it, if so try going to command prompt and using adb.
no the computer does not either. powermanager pro tells me its connected through A/C...
tried diff cables diff pcs. works fine in recovery and bootloader..
nevermind rebooting the phone solved it.. strange. sorry for a new thread
Hmm I dunno what could be wrong....what ROM are you running?
(Not very good with these things myself anyways, Still Learning =)
kwekbskdbgskdjg
Related
I have now my X2, generic_SG. It gets into bootloader moder easy but then it is not recognized my the pc or SEUS.
When I got it, and during drivers where installed upon connection the usb, it was recognized. But now, no more. So I cannot use the SEUS service even though its in bootloader mode!
I only read about people not able to get into bootloader mode, but in my case, very strange. Any help?
I had the same problem.I just change the usb cable and put in directly to pc and now is everthing ok.
What do you mean 'direct in pc'? One had to plug it always in the pc !?!
And I am using the SE provided cable. Perhaps I will try a different one but I don't think its the cable as it work fine sync'in with pc. Just in bootloader mode its a no go.
Tried today with another computer. Both have Win7 Ultimate.
Also tried 'another' cable / cables but same issue remains!
My HTC Hero CDMA Cellular South, the USB doesnt work what so ever. When I plug it in I get no message or sound of it connecting and it just starts charging. Its a stock ROM, on 2.1.... any help? I have tried rooting the device before but quit before doing any flashing of the ROM because of the lack of information of the tutorial I was following. Please guys I really want my usb back
So your phone charges when its plugged in? But you cannot connect it to your computer to mount the sdcard. You may want to try running the RUU in fastboot mode.
unCoRrUpTeD said:
So your phone charges when its plugged in? But you cannot connect it to your computer to mount the sdcard. You may want to try running the RUU in fastboot mode.
Click to expand...
Click to collapse
Could you tell me what exactly this does and how I can do it? RUU im pretty sure is the updater, am I updating the ROM again to maybe fix the problem?
Update: I checked the USB cable and swapped in a different cable and everything is working just fine. Sometimes it's the simple things!
I'm having the same problem on my Sprint Hero, running CM6 with Kernel #14. I just loaded kernel #14 last night and this is the first time I tried to use USB access.
It's like it's not connected to the computer...but it is charging.
Ive already tried a differnt usb port and cable so, how can I reflash my rom without usb support?
jwhistler said:
Update: I checked the USB cable and swapped in a different cable and everything is working just fine. Sometimes it's the simple things!
I'm having the same problem on my Sprint Hero, running CM6 with Kernel #14. I just loaded kernel #14 last night and this is the first time I tried to use USB access.
It's like it's not connected to the computer...but it is charging.
Click to expand...
Click to collapse
Okay, I just got done putting GodSpeed Recovery on my hero and toggled the usb and im still getting no indication of the usb working on my computer
You might want to look through manage applications in settings or some where in settings and clear the default for what to do when you plug your phone in.
Do you have a wireless router. You could install adbwireless from the market and get stuff to and from your phone.
Have you tried it on a different computer
You might want to delete the drivers on the computer for your phone, reboot computer and then plug the phone back into the computer and let it load the drivers.
Sent from my HERO200 using XDA App
unCoRrUpTeD said:
You might want to look through manage applications in settings or some where in settings and clear the default for what to do when you plug your phone in.
Do you have a wireless router. You could install adbwireless from the market and get stuff to and from your phone.
Have you tried it on a different computer
You might want to delete the drivers on the computer for your phone, reboot computer and then plug the phone back into the computer and let it load the drivers.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I have tried everything, I have reinstalled drivers used 3 differnt computer with 3 differnt operating systems. is there a way I can reflash the ROM without it being connected to the computer... say my sd card...?
I just hard reset the phone and still nothing...
When you connect your phone and do
Code:
adb devices
do you get anything?
I had this very same problem a few weeks ago. I was using the original usb cable that came with the phone when i got it back in march. Simply trying a new "stronger" looking cable did the trick for me.
Although, I think you have already tried this.
unCoRrUpTeD said:
When you connect your phone and do
Code:
adb devices
do you get anything?
Click to expand...
Click to collapse
What is adb devices? I get nothin when i connect it to my pc. My pc detect nothing when i go and look in device manager and my phone just start charging. Ive tried a differnt cord differnt os, differnt computer, sd card, etc.. Please help im really doubuting I will fix this and this is the only phone im going to have for a while.
adb is a program found in the android sdk. Do you have the android sdk setup on your computer? Are you rooted?
Sent from my HERO200 using XDA App
Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?
Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.
Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app
pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?
Thank you! Worked perfectly!
I have the same problem, do you have any solutions ? Thanks.
I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!
please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...
I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!
I've got 5 S7s on my desk, all Canadian variant, all from the same manufacturer all the same model. - SM-G930W8
All are recognised by my PC but one and I can't work out why not!
Plugging the phone into the PC makes no noise from the PC but the phone seems to detect a regular charger not a PC.
I have plugged it in using different cables including the one in its box and the ones used on other devices that were recognised and only this phone doesn't work with any of them.
I have plugged in, unplugged and rebooted many times.
I have set the USB configuration to MTP (Media Transfer Protocol)/Transferring files.
USB Debugging is ON and OEM unlocking is ON.
I have tried booting into stock recovery and wiping cache AND factory resetting.
When phone is turned on "adb devices" returns nothing.
I have installed Samsung Kies and Samsung Smart Switch to reinstall the drivers.
NOTHING IS WORKING!
All threads I find tell me to do the things I have listed above and have people saying these have worked but all of them I had already tried and double tried and nothing is working.
The cables are correct and working with other S7s of the same model.
All the correct drivers are installed and have been uninstalled and reinstalled.
All the correct setting are selected and OEM unlock and USB debugging enabled.
Phone was fresh out the box as were the other four and all cables.
Samsungs apps installed on PC to ensure best drivers installed.
Would really appreciate some guidance or consolation that its not something stupid I'm doing! I work with these phones everyday and this has never happened! Just banging my head against a brick wall trying to resolve it
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
yaro666 said:
maybe faulty usb port, my nephew had S6 with the same issue, service replaced usb port and it started
to work with PC.
try download mode and see if odin see your phone.
try to move the cable a lil bit and see if sth appears for a second.
Click to expand...
Click to collapse
Thanks but unfortunately Odin doesn't recognise in download mode.
Could it be a USB port problem if I used the same port for the other 4 devices and have no issue?
I'm considering sending the phone back to manufacturer to be honest I think it may just be a faulty device or something!
I bet its microusb port fault
Had a similar issue on Windows 10 , if that's what your running let the phone be connected, uninstall the driver from device manager, and then install driver select have disk and select the basic mtp , if this doesn't help connect to Microsoft support and they'll guide you through it , worked for me , my phone used to detect on other laptops but mine , also I could connect other phones on mine but not my phone, hope this helps
same issue here