I keep creating cabs using for HD wallpaper and it doenst work? it says i have installed on device correctly and i have followed the instructions below but still no imgae on my wallpaper all i want is wallpaper on all my touchflo tabs surely its not that harD??????
"This is a small program that will allow you to create high resolution wallpapers for the TouchFlo 3D interface from any image.
Tested on HTC Touch HD, HTC Touch Diamond 2, HTC Touch Pro 2, Dutty's Extreme ROMs, Manila v2+
Portrait & Landscape Mode
.NET Framework v3.5 required
Creating a high resolution wallpaper in 4 steps:
1. Load or drag&drop the image, press "Auto Crop & Resize" or select crop & resize options
2. Press the button "Convert"
- optional: Press "Landscape" & repeat steps 1 & 2
3. Press the button "Create CAB"
4. Copy and install the CAB on your device"
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!
I believe this Program was made for manila 2 and up not a stock manila, are you using a stock Rom on your HD?
yes, i think so, how do i know and how would i change it?
You've got two options mate,
Either flash a new ROM with Manila v2, for example Duttys 3.7xt
Or you can search for Mun_Rus Background for all tabs.
If i was you, i'd do the latter until you feel comfatble to flash a new ROM. My advice is stick around, get sue to your device, to read the wiki and the ROM dev forum.
There's bounds of information here but as i said in your last thread, please use the search function first, it only takes a minute and most of the time gives you your answer!
But ye, read the Wiki, the FAQ and search, before you start a thread
Related
WOW, this new development using Flash Lite 2.1 and TouchCube version`(Alpha - DEMO ) is very impressive- smooth, fast and working with DPAD, and most important REAL Touch on Hermes. Can't wait for the Final version. Enjoy it
Here's the link for the alpha v2 http://forum.ppcgeeks.com/showthread.php?t=6938&page=9
and for flash Lite 2.1
http://adobe-flash-lite.en.softonic.com/pocket
and for the Cube config file http://forum.ppcgeeks.com/showthread.php?t=6938&page=8
Edit:I will remove the attached files if the Original Authors do not want me to post them here. Original post only linked to the PPCgeeks site forum.
13/09/07 - Add new zip file for SMS V2_W_SMS.zip - MUST install the original files first, then unzip, overwrite contents with SMS files. Note: when tap on the SMS button- use the left side of button ( tap on center button will exit to clock screen ).
04/10/2007 - Update new Cube Launcher v2_real.zip - 12 contacts, remove demo, improved features. etc... as per Byka post http://forum.xda-developers.com/showthread.php?p=1557000#post1557000 Post #104. Enjoy it
In this attachtment the cube :
-rotating realtime (when you pull your finger)
-invoke the cube: drag the finger bottom to up (on the mainscreen, is you not keeping that)
-remove the cube: drag your finger up to bottom.
-This version comprise the 12 contacts , real and refresh datas look the signal and battery icons (colored yet, this relevant me beetwen test).
-this version not comprise the sms imput panel, but I removed the "sample message" text.
-lack now vibrate icon.
-removed the Demo texts.
Next release: Button on the mainscreen for you fauvorite ScreenLock program.
The SMS write panel finished, but I testing yet, I liking preference the t9 looked panel here big buttons. (abc2...def3...)
10/10/2007 - Add new version cube_real_edited.zip as per Byka Post #117. Unzip, copy over existing installation and Enjoy .
24/10/2007 - Add new version from Byka post #143
Cube v_2.1 + selectable MainScreen_w_Digital clock +Config12_background + efrost MINIMIZE.exe + notyfi.mscr for Mortscript.
WARNING! The all files default folder on your PPC in the Main Memory:
../Program Files/Szabi/CubeLauncher
In the new Page1.txt config file add some variables:
&Timeformat=24& //digital clock hourformat
&Vibra=off& //not avaible
&MainScreen=off& //If you like keep to the MainScreen ==>
&Minimize=on& //apply the MINIMIZE command only, not will be exit the cube, when that invisible
&Name1=Contacts &Command1=".. //etc... etc...
If you like apply the MainScreen the missedCalls and the missed SMS indicators (or FGA's super mainscreen) you need prev. installed (and one running) MortScript.
If you like apply EFROST's super FTouchFLO applycation starting the my cubefrom default TODAY screen, you need the FTouchFlo folders write any settings in the settings file:
...
DownUpApp:/Program Files/Adobe/FlashLite/saplaywm.exe
DownUpAppCmdLine:"/Program Files/Szabi/CubeLauncher/Cube2.swf"
...
Speed and easy. I hope this help for you.
BR!
ByKa
Looks very good!
well its alll we got nice 1
gonna try looks ok,
jdac21
just installed it...and it works great!!!!
does it works with wm6?
dahool said:
does it works with wm6?
Click to expand...
Click to collapse
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).
pl55 said:
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).
Click to expand...
Click to collapse
i confirm works great ,
jdac21
Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^
dahool said:
Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^
Click to expand...
Click to collapse
check your email
and enjoy the file attached
Thank you a lot!!! lets test it xD
dahool said:
Thank you a lot!!! lets test it xD
Click to expand...
Click to collapse
"DE NADA"
EDWARD
too nice!!!
I'll wait for the full version!!
anyone knows when it comes out?
how do i install this
i cant figure wich ones i need to install
mr_nonshalant said:
i cant figure wich ones i need to install
Click to expand...
Click to collapse
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to same directory as cube launcher
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.
thanks for posting! This is a very cool high tech addition to the Hermes!
My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?
afguard17 said:
My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?
Click to expand...
Click to collapse
I have since uninstalled this, but I believe you first touch near the top of the screen, near the clock. The clock will disappear. Once the clock disappears, swipe from the very bottom of the screen to the top. That should bring up the cube.
pl55 said:
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to Storage card ( to save memory)
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.
Click to expand...
Click to collapse
thanks for the instructions on using the new additions!
Here're some of the icons you can use, and a new background jpeg file ( if you don't like existing one ). Have fun
Anyone have a link to the config file? I got the other two main files from here...
http://forum.xda-developers.com/showthread.php?t=328010
However, they don't seem to have the config file, and I don't have a pocketpc geeks account to download the config.
ok so i was reading development and hacking and so i read a post "manila 2d working on non htc devices" so i though hey this might work on the BA cause the other non htc devices don't have the touchflow driver and i said to my self hey lets see if it works, and so i go here http://forum.xda-developers.com/showpost.php?p=2692520&postcount=2770 and download the update 14 and after that i go ahead and start installing all the required cabs and followed the proper installation instructions found in this cab http://www.megaupload.com/?d=FZE89TUO after that i install manila 2d and finally the Manilla2D_NonHTC_Patch.CAB and i cross my fingers saying inside me "please work" like a mad man, then i soft reset and my Ba goes starts to boot and hes still booting 10min almost booting and i said to my self omg il have to hard reset but then the impossible happens.. IT BOOTS AND GUESS WHAT MANILA 2D IS LAUNCHING AFTER LIKE 2 MINUTES ITS SHOWS ITS SELF ...MANILA 2D OMGGG" after that i go crazy and start posting this thread for all of you to read and rejoy ^^.
Heres a video for all of you to enjoy also xD
Regards
Vitto
why you needed to create whole new thread as I already posted it in the other thread for manila2d in the same section
who cares? i don't, do you? you catch me in a bad mood buddy sry thats the best answer i could find
Manilla2D, Update14 & Update16
Manilla2D Update14 & Update16 are working fine on my BA, Excellent.
Use M2DCustomizer, to hide some tab.
have try change a skin. Excellent
Just need to be patience while starting TouchFlo.
Manila works, but not so fast as want
Petrovych said:
Manila works, but not so fast as want
Click to expand...
Click to collapse
1. Install update 16 from first page
(I have verified that this can also be used with update 15, I did have to skip installing HTCAlbum but this is already built into my ROM)
2. After installation when it asks you to reboot choose cancel
3.Install Manilla2D_NonHTC_Patch.CAB
4. Reset, DONE
http://forum.xda-developers.com/showthread.php?t=398173
BlueAngel OK!
it works !
frame-rate is ok, but mail tab shows wrong email number.
and when i switch to music tab, i just get a windows media player error (all fix installed)
@ sundream, xplode
are you going to make a "Opal stuff" rom ?
increase performance of manilla2D on BA
to increase speed Manilla2D on BlueAngel
(if you want really need manilla2D work on your BA) :
1. hard reset.
2. install step 1 & 2, don't soft reset.
3. install step 17. M2D-Beta-0.07.cab/0.08/0.09
4. install Manilla2D_NonHTC_Patch.cab, don't soft reset.
5. install manilla2d customizer (M2DC_v0.3.17.cab>include in the package). now soft reset.
i skip step 3 to 16, because i don't need htc audio manager, youTube, htcAlbum, etc.
After restart, run M2DC. uncheck photo widget, music, location, operator & my fav.
i also install wisbarAdvance3.2, to improve speed when access programs & settings. 'cause wa3 can expand (like desktop start menu) program & settings menus, so don't have to open windows standard program & menus, that can slow a respond when manilla2D installed.
once again: http://forum.xda-developers.com/showthread.php?t=398173
Cabs
What Were the other neccessary cabs
Is it really working fine at non HTC devices?
IrfanZevan said:
to increase speed Manilla2D on BlueAngel
(if you want really need manilla2D work on your BA) :
1. hard reset.
2. install step 1 & 2, don't soft reset.
3. install step 17. M2D-Beta-0.07.cab/0.08/0.09
4. install Manilla2D_NonHTC_Patch.cab, don't soft reset.
5. install manilla2d customizer (M2DC_v0.3.17.cab>include in the package). now soft reset.
i skip step 3 to 16, because i don't need htc audio manager, youTube, htcAlbum, etc.
After restart, run M2DC. uncheck photo widget, music, location, operator & my fav.
i also install wisbarAdvance3.2, to improve speed when access programs & settings. 'cause wa3 can expand (like desktop start menu) program & settings menus, so don't have to open windows standard program & menus, that can slow a respond when manilla2D installed.
once again: http://forum.xda-developers.com/showthread.php?t=398173
Click to expand...
Click to collapse
where did you find the tutorials with that step on first page on that link..
can anybody give me the full script
1-what is ROM ?
2-if it put tf3d rom or another it will delete all files in the system ( like hard reset ) ?
3-is tf3d is like a panel ( spb mobile shell ) or will delete windows mobile system?
4-what is GeoTagging in camera ?
thanks
From what ive gathered by using roms my self... i have found the following:
1. What is a rom?
it is basically the thing that make the user interface look the way it looks. The default windows today panel is the default rom which the phone comes with. TF3D rom will replace that and make it look like a HTC Touch HD. you can install it as a panel by following this link-
http://forum.xda-developers.com/showthread.php?t=441439&highlight=tf3d+panel
Download TouchFlo3D on Xperia X1 cab and TouchFlo3D as Panel Installer Installer.
Install TF3d first, softreset, then go to settings, today, items and untick every thing. then soft reset.
Now install TF3d panel installer. soft reset. then just choose the panelas younormally would.
2. A rom will edit certain windows files to make it look and behave in a different way, but it would still be the windows interface. if you install another rom, it will erase all files on phone. and replace certain windows files.
3. see q 1
4. Dont know what geo tagging is??
thanks alot
but when i install the tochflo 3d beta 3 and made everything then when i press on the panel it writes to me loading in a white screen and notheing occure ??
i was using the blue marble wallpaper but after running the sprint upgrade it can no longer see the theme. i keep trying to install it but it never comes up in the list. i believe i may have downloaded it from the hd section but it worked fine until the upgrade. are there specific wallpapers needed to work with the new rom's software?
crash said:
i was using the blue marble wallpaper but after running the sprint upgrade it can no longer see the theme. i keep trying to install it but it never comes up in the list. i believe i may have downloaded it from the hd section but it worked fine until the upgrade. are there specific wallpapers needed to work with the new rom's software?
Click to expand...
Click to collapse
hi, do you mean it is in a cab made using HD walls?? if so then yes it can depend on what rom you have to if it works as there are many options in the making process. can you apply "normal" wallpapers ok?
Ok i just looked back after i remembered i asked the sae question a while back, this solution from Andrew, worked for me but you will need the original wallpaper from which the cab was made. You could extract the wall paper from the cab using Quick cab-which is free
Quote:Originally Posted by osrix25
Hi Andrew, may i ask, what file you are using for background for all on this Rom? or will the HDwall do this? Also offTopic but which config in HD wall did you use to create this?
Cheers
Hi osrix25
Easy: Install "HQWallpaperPatch_v1.22_forManila2.5.19222xxx. cab" which is attached to post #2123 of this thread. N.B. This will make your Sense 2.5 incompatible with Co0kieMonster's new home tab MOD (leads to square by clock bug). Once you've installed this patch you can then install a HDWall cab. Here's how I made it:
Make sure you're using HDWall 2.8b. Choose the profile: "HTC Sense v2.5 & WM6.5 - No Compression", then use the "Convert" button to create the manila files from your image. Next, change the profile to: "HTC Sense v2.5 & WM 6.5 - All Tabs - No Compression" and convert to manila files as before. When making the .cab file, ensure you include all the manila and image files you have used when converting using both profiles.
If that doesn't work, use the profiles in the opposite order. The only limitation of HDWall at the moment is that for this version of Sense 2.5 it can only use the same image when skinning both the landscape and portrait images. This may be a limitation of Sense 2.5.2011.3030 - more research is needed I think.
To skin the lock screen and start menu backgrounds make WVGA portrait and landscape .jpg files of your image and then rename them:
Portrait: "stwater_480_800.jpg"
Landscape: "stwater_800_480.jpg"
Copy these two .jpg files to \Windows and restart the device.
Hope that's helpful.
Cheers
andrew-in-woking
__________________
yeah it's a cab file with 2 images for normal and landscape. i'm going to try with jpg's for now.
crash said:
yeah it's a cab file with 2 images for normal and landscape. i'm going to try with jpg's for now.
Click to expand...
Click to collapse
Are these the ones you wanted to use?
ALL SCREEN ARE ANIMATED: This thread is for all those who are looking for custom boot screens for their device. Im making custom boot screens for anyone who's looking for a custom one. Im currently only doing text animation with custom background. I will keep you posted and soon as I start making animated backgrounds. I currently have a Touch Pro 2 so most boot screens will work perfect for Rhodium Touch Pro 2 all WVGA & VGA as well. Hope you enjoy. For another works by me check out
http://photoshopmanag.yolasite.com/
Follow me on twitter to get the lastest bootscreens as I post them
http://twitter.com/photoshopmanag
Install Cab to change bootscreen
Feel free to post up request..Also leave feed back so that I can improve to give you what you need Thanks..
Also will make non animated screens for you just request.
AGZ Custom Animated Bootscreens
Install Cab to change bootscreen
Instructions
1. Install to Device or SD card
2. Open Program After install
3. Click Menu, Bonus Features change Animated bootscreen
4. select your GIF wherever you saved it
5. Click save and reboot. ENJOY!!!