Database Users

HTC Touch Cube-- Easy One-Touch Install Version

20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Device Compatibility
MIO........A700.......WM5.........Work QuickDial.exe Dead
Asus.......535.........WM6.........Work QuickDial.exe Dead
Dopod.....P800W.....WM5.........Work QuickDial.exe Dead
MIO........A501.......WM5......... Work QuickDial.exe Dead
CHT........9100.......WM6..........Work
AT&T......8525.......WM6..........Work
HTC......TYTNII......WM6..........Work
Dell......Axim X51V..WM6..........Work
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616

Can you please post device compatibility list or is this for a specific device only?
Regards,
Carty..

Thanks man I will try it

let me try it. thx

Mirror please!

here is the mirror.
hope it is useful. maybe u can put it in the 1st post to make it easier?
thanks.
http://w14.easy-share.com/11341771.html

I know it's probably covered somewhere, but with so many posts on the Cube and FTouchFlo, I can't find it.... How do I get the gesture system to work on HTCAlbum after installing FTouchFlo? It's in the list of exclusions properly, but the gestures no longer work; even if I disable FTouchFlo and soft-reset my Kaiser.

Sorry guys. Is the attached file corrupted or not complete?

leo2016 said:
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Click to expand...
Click to collapse
Will this work on square screens (240x240)

Works really well, thank you!

I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?

I may have to try this once the results are in....

mauce said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
Click to expand...
Click to collapse
i think the same thing happen to me.

T3D0nG said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Click to expand...
Click to collapse
Readme
# Please Remove Any VER FtouchFlo、FTouchFloConfig
# Please Install HTC HOME
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC

WM5
Does this work with wm5 standard oem rom devices?
Is it the original Cube?
Is the media player interactive?
Will have efrosts touchflo installed affect it?
Thanks

It works! I followed all of the instructions in the readme file: Removed the touchflo that I already had on the device (For removing previous touchflo versions: I had my old touchflo in the start up menu in windows, and was having trouble getting rid of it since it was already running. So I cut and pasted touchflo to a different folder, soft reset, and was able to delete it so it wasn't running at start up anymore), already had HTC Home on there, installed the cab installer, went into the touchflo config file and enabled touchflo, did a soft reset, and it works perfectly.
...only thing is the "New E-Mail" and "SMS/MMS" tab seems dead, but it still works from HTC Home.
The "contact" side takes a couple of seconds to come up but thats expected. Everything else works like a charm. Easily the best one-stop .cab installer of the Touch Cube that I've tried so far.
Thanks for the post.

...sorry....I forgot:
It works fine on my AT&T 8525, WM6 offical AT&T Rom. Thanks again!

If you had FtouchFlo installed previously, make sure you delete the exe file from /Windows/Startup and leave the one from the cab installation. My cube worked after that.

ADD Device Compatibility

Works great here. I'm using a Blue Angel running xplode's latest WM6 ROM.
Thanks for the great work!

Having some Q and ned help !!!

1-what is ROM ?
2-if it put tf3d rom or another it will delete all files in the system ( like hard reset ) ?
3-is tf3d is like a panel ( spb mobile shell ) or will delete windows mobile system?
4-what is GeoTagging in camera ?
thanks

From what ive gathered by using roms my self... i have found the following:
1. What is a rom?
it is basically the thing that make the user interface look the way it looks. The default windows today panel is the default rom which the phone comes with. TF3D rom will replace that and make it look like a HTC Touch HD. you can install it as a panel by following this link-
http://forum.xda-developers.com/showthread.php?t=441439&highlight=tf3d+panel
Download TouchFlo3D on Xperia X1 cab and TouchFlo3D as Panel Installer Installer.
Install TF3d first, softreset, then go to settings, today, items and untick every thing. then soft reset.
Now install TF3d panel installer. soft reset. then just choose the panelas younormally would.
2. A rom will edit certain windows files to make it look and behave in a different way, but it would still be the windows interface. if you install another rom, it will erase all files on phone. and replace certain windows files.
3. see q 1
4. Dont know what geo tagging is??

thanks alot
but when i install the tochflo 3d beta 3 and made everything then when i press on the panel it writes to me loading in a white screen and notheing occure ??

Maybe i'm stupid HELP!!!!!!!

I keep creating cabs using for HD wallpaper and it doenst work? it says i have installed on device correctly and i have followed the instructions below but still no imgae on my wallpaper all i want is wallpaper on all my touchflo tabs surely its not that harD??????
"This is a small program that will allow you to create high resolution wallpapers for the TouchFlo 3D interface from any image.
Tested on HTC Touch HD, HTC Touch Diamond 2, HTC Touch Pro 2, Dutty's Extreme ROMs, Manila v2+
Portrait & Landscape Mode
.NET Framework v3.5 required
Creating a high resolution wallpaper in 4 steps:
1. Load or drag&drop the image, press "Auto Crop & Resize" or select crop & resize options
2. Press the button "Convert"
- optional: Press "Landscape" & repeat steps 1 & 2
3. Press the button "Create CAB"
4. Copy and install the CAB on your device"
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!

I believe this Program was made for manila 2 and up not a stock manila, are you using a stock Rom on your HD?

yes, i think so, how do i know and how would i change it?

You've got two options mate,
Either flash a new ROM with Manila v2, for example Duttys 3.7xt
Or you can search for Mun_Rus Background for all tabs.
If i was you, i'd do the latter until you feel comfatble to flash a new ROM. My advice is stick around, get sue to your device, to read the wiki and the ROM dev forum.
There's bounds of information here but as i said in your last thread, please use the search function first, it only takes a minute and most of the time gives you your answer!
But ye, read the Wiki, the FAQ and search, before you start a thread

[Release] WM6.5.3 Build 28008 English by d-two

Well, I am back and I am glad to have some time to support the community again, updated the first post and i will flash the rom today and will be able to support this thread as well.
Windows Mobile 6.5.3 Beta English Rom 28008
V1.0
Download via Rapidshare.com
IMPORTANT! If a program can not be closed with the X, please use the OK hard key!
Included Programs:
- HTC USB to PC
- HTC Comm Manager (Replaced with an older Version)
- Device Information
- Microphon AGC
- Button lock Setting
- New Keyboard Layout
- X-Button (Programs close by clicking X, for minimizing tap and hold X, tap and hold the Start key for Taskmgr)
- Reconizer integrated!
- HTC Power
- HTC Advanced Netzwerk (For GPRS Settings)
- WMP replaced (By a better player! Plays everything!!)
- xdaShutdown (Down in the Taskbar!) IMPORTANT!!! Shutdown function has a Problem with the Touchscreen!! does not work for landscape mode
- FlightMode
- .NetCFcfg
- Keyboardbacklight
- WLAN Settings
- New Bluetooth Settings!
- New Telefon Settings!
- 16MB RamDisk
- WM Widgets compatibility (IE8 must be installed!)
FIX:
- SMS Alarm
- changed Start Menu
- XIP improved
- Alarm Sounds
- CHome changed
- Input Options
- GPS Option FIX New
- Provider FIX New
- Lan Option FIX New
Misc:
- Made with a new Kitchen (much better)
- SQM Dummy (not important)
- FWUPDATE Dummy (sends data to MS)
- I deleted some files for more space
- System Tweaks New
The ExtROM can be used for the new version!
Extrom 23081:
Download via Rapidshare.com
- Office (UPX)
- Pocket IE8 (UPX,FIX Zoom)
- MyPhone
- WM MarketPlace
- NetCF 3.5
More Windows Mobile Apps by request.
The Extrom is installed by putting the folder to the sd card. The installation starts automatically after a soft- or hard reset. The cfg.txt can be editted to personal use.

In correspondance with cosmicgate, i decided to post our guide on how to upgrade here, to avoid question further questions about that:
THESE INSTRUCTIONS ARE SUITABLE FOR WINDOWS XP COMPUTERS ONLY!!!
For people running WM5/6x but with 43MB of storage:
You have to downgrade to WM2003 and here's how to do that:
1. Download this Windows Mobile 2003 SE rom:
Download from Rapidshare
Download from Uploaded.to
and extract it to a folder of your choice.
2. Remove both the the SIM card and the sd card
3. Put the device into Bootloader Mode, pressing power+record and reset
4. your device display shows Serial v2.0x
5. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
6. Now let's start the actual Upgrade:
7. Navigate to the Upgrade folder
8. Start Maupgradeut_noid
9. If in the 2nd window the rom version is not shown, something went wrong, start over!
10. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
11. After it finishes perform a "WM2003 hard reset" by pressing power and reset
12. wait for the extrom to finish
13. now you can re-insert your sim and sd card (if you are planning to go on from here, you can also leave them out).
14. proceed with "For devices running wm2003"
For devices running wm2003:
1. Copy repart_doc.exe and the unlocker cab to the device and install the unlocker. In the start menu you will find a folder named "Extrom Tool".
2. Click "unhide" (if you are getting an error message, proceed with 2.a, else with 3.)
2.a the unlocker installs into the standard folder for program files, which depends on the rom language can be "\programme" or "\programmes" etc.
2.b the link in the start menu always points to "\program files"
2.c the easiest way, to solve that, is to rename your program files folder to "\program files"
2.d that destroys parts of the system, but doesn't matter because it is just needed for unlocking
2.e since now the link location should be correct, proceed with step 3.
3. Click "unlock", maybe a soft reset is needed.
4. Start repart_doc.exe
5. Set the future size, if not pre-entered, to 128kb (smallest possible partition size on this file system)
6. Click "Format now!"
7. Soft reset
8. Go back to the Extrom Tools
9. "Lock"
10. "Hide"
11. Now proceed with "Upgrading a WM5/6 device"
Upgrading a WM5/6 device
1. Remove both the the SIM card and the sd card
2. Put the device into Bootloader Mode, pressing power+record and reset
3. your device display shows Serial v2.0x
4. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
5. Now let's start the actual Upgrade:
5.a copy the downloaded nk.nbf to any given folder, let's call it Upgrade 28008
5.b copy the contents of this package to the same folder: MAupgradeUt_noID
5.c Start MAupgradeut_noID
6. If in the 2nd window the rom version is not shown, something went wrong, start over!
7. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
8. After finishing, take the device out of the cradle take out the battery and insert the SIM card
9. copy the EXTROM folder to the sd card and insert the sd card
10. Hard reset the device, pressing reset+power and record+camera and in the menu, that appears set:
Enable_Kitl: NO
Clean Registry Hive: YES
Format Storage: YES
using the camera and record buttons.
11. press the mail button to confirm your selection.
12. your device starts for the first time, you align the screen and let the extrom install, it soft resets and your device is ready to use

Special thanx to d tow and chef tony
I will try it.

Synchronization does not work Microsoft ActiveSync Thank you Chef_Tony

what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?

Chef_Tony said:
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Click to expand...
Click to collapse
Je bent echt geweldig werken nu
You are really great now working
Bedankt
Thank you Chef_Tony

I'm am also DLing now and will certainly give it a try. Great work and thank you both, D-two and Chef Tony.

Good work ;
It seems beautiful Rom
Many Thnx , Maybe I'll try it later
Best Regards.

great work..
how about input settings?

yes, i know that they are missing, i wrote d-two about that, i am missing them too.

hi good work
but there is missing in the contrast setting too.

hi d-two! i can't open wmp and set sounds & notification? why?

hi d-two! missing backlight slider

@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!

Chef_Tony said:
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Click to expand...
Click to collapse
ok Chef_ ,i waiting for final version

what about microphone icon in the system settings is it there

how to turn on backlight?
====
edit:
problem solved

aaraj said:
what about microphone icon in the system settings is it there
Click to expand...
Click to collapse
No, there is no Microphone AGC in the settings.
changed 1st post

when using Lanscape mode, and at the restart, the screen will return to Potrait with a touch screen that does not irregular like the R71's Xplode. but it was not my experience on the d-two ROM version 1 (WM6.5.1 build 23052). try to use the method Lanscape then restart, then you will experience it.
one again
about gprs icon

gotz said:
great work..
how about input settings?
Click to expand...
Click to collapse
This solved the input settings problem:
Remove the "Redirect" value under the following keys:
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
Until now, it seems to be a very fast and stable ROM!! My congratulations on this D-two!! and my thanks to Chef_Tony.

Titanium-Hero Sense UI for typhoon

hi
this is not my work just rewrote some files
the main add"http://forum.xda-developers.com/showthread.php?t=566731&highlight=sense+UI"
replace cab attached.
1-download main pack from above add
2-use 2 below cab instead of main cab
3-you need JMLPanex2.1 and mortscript("http://www.sto-helit.de/forum/viewtopic.php?f=12&t=5452&st=0&sk=t&sd=a&start=200")
4-first install mortscript then install JMLPanex2.1 after it install hero pack (note 2) and then restart

Well gave it a shot. No love. It makes the Mobile Op screen and freezes.
I'll try again after I reload 6.1, however I think it may be asking to much of the phone.
How much op memery is needed to have all this running?
Remember specs for Typhoon are less then others
Has only 32 MB built in.

Sorry to report.....
I have followed your instructions to the letter.....and again I have to reload my phone with Win Mobile.
( Sticks after Windows Mobile Load screen)
Do not try this unless you are comfortable in flashing your phone!!!
For folks who are flash shy, go with farzad23's Diamond Theme. Easy and good looking.

@ Greywolf_Ghost
i.m using ,dont need more ram but it is a little heavy and another point is "did u read the main add instruction???"
JMLPanex need wm6.5
why flash u'r phone u can just hard reset ,very easy at boot start

Yes as I said I did everything you listed. I even went into 6.5 and tried.
I am running 6.5 as I type this.
The poor little Typhoon just does not seem to have enough available program memory available to handle it all.
The reason for the reload is.........
by default, the last installed screen before reset comes up first. So the phone locks up before it finishes reboot. It runs out of available memory and stalls. ( I tried a number of ways to attempt to get to a default 6.1 or 6.5 main screen no luck on my end).
Thus with a reload ( less then 7 min), no added registry, wallpapers, or files to clog the boot up.
If others manage to get, good on them.......please post up on steps taken.
My feeling tho is this is more for a 64MB and above phone.
It's why I said less advanced users should go with your Diamond version as it looks just as good as this.

farzad23
I would like to give this another try, however I need you to list what files in what order have to be installed.
I have been reading your instructions over and over, and they are confusing!!!!!
Please list by order, and link the files. ( all required files, and anything that is not needed please also list as a don not install).
Please clear up so I can see if this does work on a Typhoon.
Is anyone else mixed up by the first set of instructions?

@Greywolf_Ghost
hi
i'm using "Titanium-Hero Sense UI" on i-mate sp3(typhoon)
this is a titanium plug in and it is exactly like JML Today.
this is the way i installed and used.
1- titanium and chang home to titanium
2- mortscript
3-JMLPanex2.1
4-CHeroClock v0.8.cab
5-CHeroClock-ClockImage.cab
6-HeroTitanium V0.4.cab
7-CHeroSetting-V0.7.cab
8-and the rest of hero cap then restart
go to end of CHome (SLIDE DOWN)u should see new plugin then read and folow the procedure on it
that's what i used before, i'll upload another theme like this soon

farzad23 said:
@Greywolf_Ghost
hi
i'm using "Titanium-Hero Sense UI" on i-mate sp3(typhoon)
this is a titanium plug in and it is exactly like JML Today.
this is the way i installed and used.
1- titanium and chang home to titanium <---- Which file? As you also have a Titanium V0.4 listed.......This is what I mean not quite clear!!
2- mortscript
3-JMLPanex2.1
4-CHeroClock v0.8.cab
5-CHeroClock-ClockImage.cab
6-HeroTitanium V0.4.cab
7-CHeroSetting-V0.7.cab
8-and the rest of hero cap then restart
go to end of CHome (SLIDE DOWN)u should see new plugin then read and folow the procedure on it
that's what i used before, i'll upload another theme like this soon
Click to expand...
Click to collapse
The rest seems clear enough.....just some confusion as to what the first file is.

@Greywolf_Ghost
u should install TItanium"http://forum.xda-developers.com/showthread.php?t=588837" then restart then>start>setting>home screen>choos titanium OR titanium media

farzad23
Many Thanks on the redo of instructions. It worked.
I'd say tho I still prefer the Diamond Slide. As I like the slide bar going top to bottom, in Titanium, bar stays mid and the rest moves through it.
This does look awesome tho.
In any case Thank you for the re-writes!!!