okay trying to set up my email in the email application running into an error at outgoing settings.
Tried various security settings, changed the port from 25 to 587
But get the error:
Code:
Cannot connect to server.
(421 aamtaout03-winn.ispmail.ntl.com connection refused from [xx.xxx.xxx.xxx])
any ideas?
thanks guys & girls
Related
I installed the AT&T rom available on their site and now my pop3 email accounts don't work. I have one on a friends server and another on Gmail and both give me errors now when i try to download mail.
I get the Messages cannot be downloaded to your mobile device error.
Any ideas?
How about you post what your pop mail setting are currently configed as.
angelis said:
I installed the AT&T rom available on their site and now my pop3 email accounts don't work. I have one on a friends server and another on Gmail and both give me errors now when i try to download mail.
I get the Messages cannot be downloaded to your mobile device error.
Any ideas?
Click to expand...
Click to collapse
im running that rom also.. and my email works fine(push and pop)... post your settings so we can determine whats wrong...
Email settings
I got gmail working, but my private account hates my 8525
Personal account on a private server.
Email Provider: Other (POP3/IMAP)
Email Address: [email protected]
Your Name: angelis
Username: angelis
password: xxxxxxxx
account type: POP3
Name: personal email
incoming mail: mail.crews.com
outgoing mail: mail.crews.com:587
domain:
connection: The Internet (i've also tried My ISP and MediaNet)
and it's set to use authentication on Outgoing mail.
@shogunmark-
is it possible to get blackberry connect to work with this rom? I tried and could not get it to work. I've read about people hexediting the version numbers of wm6 roms to get it working. is this the issue with this new att rom also?
I am back on the previous rom now and it is working fine.
I tried running the no proxy cab on the new rom to no avail.
thanks,
wes
angelis said:
outgoing mail: mail.crews.com:587
Click to expand...
Click to collapse
I vaguely recall someone having a similar problem with accounts that use non-standard SMTP ports. There's a thread for the 2.15 ROM... may have read it there.
Port 25 still needs to be open on that mailserver, otherwise inbound email wouldn't be coming into it. Port 587 is just used for people who cannot use SMTP due to their ISP blocking port 25, but port 25 on the server itself still needs to be open as that's where it receives inbound email. So take off the :587.
Just for giggles I verified for you that the standard SMTP port is open on the server:
telnet mail.crews.com 25
Trying 66.194.214.163...
Connected to mail.crews.com.
Escape character is '^]'.
220 mail.crews.com running EIMS X 3.3
quit
221 2.0.0 mail.crews.com closing connection
Connection closed by foreign host.
HOWEVER, you have never said if the problem is with sending or with receiving email. This setting has nothing to do with receiving email, only with sending.
I said the error was messages cannot be downloaded to the device. But to confirm, the error is that messages never download to the device and I get an error.
Either way, fix what I stated above. It may be that the device is failing during the send/receive because of your configuration problem and giving up altogether.
Change that. No luck. It still gives me the same error.
Hi guys,
Im having a frustrating time trying to get my outlook to send email. I can receive just fine.
Just a note, my computer sends/receives fine and i use the same settings on computer and phone. I never user activsync because ive never been able to get the linux version to work for me.
My server requires authentication however i get this error when i try to send: "The message(s) could not be sent. Check that you have network coverage
and that your account information is correct. Then try sending again."
If i uncheck the option for authentication, the email bounces as it should saying relay is not allowed.
Im using the same settings as my computer, but I just dont see whats wrong. Im a linux user and built my webserver so i feel like i should be able to figure this out which leads me to thing outlook sucks lol
Any suggestions to try?
James
In 'Edit Server Settings' where it has your User name, Password, and Domain how do you have that set up? when i first did mine i set it up with all three, but it didn't work, and what worked for me was setting the username to be [email protected] leaving the Domain field blank -- so that is something to look into, and if it is different maybe try setting it up the other way just putting your email as the username and the domain in the domain field.
How do i find 'Edit Server Settings'?
In my inbox, i click the Menu button bottom right, click tools and options. then i click on the email account i created, which sends me through all the email settings in the following order.
Note: i never used Outlook email as it never let me specify pop or imap so i added New Account.
Email address -- [email protected]
Your name - james
Account display name -- greyed out
incoming server name lwp.ca
account type -- greyed out (its set to imap)
username -- [email protected]
password
outgoing smtp server: lwp.ca
requires authentication checked
use same user name and password for sending mails checked
Automatic send/receive -- set to manual
download messages set to from the past 30 days
message format : html
message download limit: headers only
download attachments: do not download
I am having the same problem with Alltel PPC6800 and I found out (by tethering with my PC) that some of their IP addresses are listed with Spamhaus.
If I keep trying it will eventually go through when the IP Address switches to one not listed.
Hope it helps?
Roger
996turbo said:
I am having the same problem with Alltel PPC6800 and I found out (by tethering with my PC) that some of their IP addresses are listed with Spamhaus.
If I keep trying it will eventually go through when the IP Address switches to one not listed.
Hope it helps?
Roger
Click to expand...
Click to collapse
Ive never tried tethering.. Ive been using the built in wifi or the data service with no luck.. I think its a crippled outlook issue..
Does anyone have suggestions for a free mail client that uses IMAP? If only thunderbird could be used
jemmrich said:
How do i find 'Edit Server Settings'?
In my inbox, i click the Menu button bottom right, click tools and options. then i click on the email account i created, which sends me through all the email settings in the following order.
Note: i never used Outlook email as it never let me specify pop or imap so i added New Account.
Email address -- [email protected]
Your name - james
Account display name -- greyed out
incoming server name lwp.ca
account type -- greyed out (its set to imap)
username -- [email protected]
password
outgoing smtp server: lwp.ca
requires authentication checked
use same user name and password for sending mails checked
Automatic send/receive -- set to manual
download messages set to from the past 30 days
message format : html
message download limit: headers only
download attachments: do not download
Click to expand...
Click to collapse
sorry when you said you use outlook to send i assumed you were using an exchange server -- since you are using IMAP what i said is irrelevant.
When you are at the point where it asks for the outgoing SMTP server, there is a link to 'Advanced Server Settings' at the bottom of the screen. clicking on that will allow you to require SSL for incoming and outgoing -- that would be my only other guess.
but i do find it strange that your incoming and outgoing mail servers are the same and not IMAP.lwp.com and SMTP.lwp.com or something similar.
So I'm having a problem with .Mac mail. I can receive and view my e-mail but I cannot send e-mails using my mogul. I've been searching for my answer on this forum before making this thread but didn't seem to find it. I also tried changing the options up and down but no success.
My settings are as follow:
_________________________________________
Incoming Mail Server
mail.mac.com
Account Type
IMAP4
Outgoing (SMTP) Mail Server
smtp.mac.com
[√] Outgoing Server Require Authentication
[√] Use The Same Username And Password For Sending Efmail
Advanced Server Settings
[ ] Require SSL For Incoming E-mail
[ ] Require SSL For Outgoing E-mail
Network Connection
The Internet
_________________________________________
Everytime I try to send a message, I get this notification:
'The message could not be sent. Check that you have network coverage and that your account information is correct. Then try sending again.'
In case it matters I'm using the DCD's Mogul ROM & Kitchen 3.0.4
Thanks in advance,
Bruno
Any comments?
...Anybody ¿?
Change the username for sending.
Instead of:
[email protected]
Use:
username
On Setting up Exchange...
Problem:
Exchange settings does not allow 4 char domain... for example: mail.domainname.INFO
.info (four char) does not work.
On domain text box.... I get an Error... "...Domain is not correctly formatted..."
I tried to enter the IP and it did not give me any error for the domain...
But now I get error on the E-Mail... "..Please enter email correctly..." [email protected]
Can anyone make a patch or something for this issue?
Note: It's not my phone, I need to set it up for someone.
Thank you...
Work Arround works on 2.2 update...
Work Arround:
Using IP in the domain name text box
Hello everyone. I cannot figure out how to add my second email to my droid. I have it rooted with the liberty 1.5 rom and figured out how to do the hotmail but my other pop3 I cannot figure out.
Here is the instructions from the website.
PC Client Setup Information:
POP3 (inbound mail) Server: mail.ar15.com
SMTP (outbound mail) Server: mail.ar15.com
- User name and password are case sensitive.
- Your password must be 4-16 characters long.(alpha-numeric)
- For security, we require authentication for outbound (SMTP) mail. check "MY SERVER REQUIRES AUTHENTICATION" in your mail client under server settings.
- Please set the email check timer to be 10 minutes or more.
I enter in all of my info but cannot find any part where It asks for the SMTP. Under security type I see
none
SSL
SSL (accept all certs)
TLS
TLS (accept all certs)
I can get passed the ingoing email screen but when it comes to the outgoing email screen I get this message: Unable to open connection to server
Any help? I had it set up before I rooted but not cannot get it dialed in.
Thanks
No one?
Please help as this is super important I get it working..
I would go back in to settings>accounts> and click on that account. then select outgoing server, and try it without verifiy certificate, then if that doesnt work, try it without authentication.
vzt said:
I would go back in to settings>accounts> and click on that account. then select outgoing server, and try it without verifiy certificate, then if that doesnt work, try it without authentication.
Click to expand...
Click to collapse
I have tried that and it did not work
Anyone else? There is no place on the outgoing screen that says anything about server authentication
Bump Thanks