Database Users

Problems sending mail through smtp when using GPRS

I have had no trouble sending and receiving e-mail when I am connected to the servers of my ISP. That is, dial-in ISP, to which I connect via cell phone, where the pop server and the smtp server belong to the ISP where I also have my e-mail account.
The moment I connect via GPRS, all I can do is download my e-mail. When I try to send, I get all sorts of error messages stating that the servers could not resolve the recipients' names. Is there a way around this? :?: Do I need to specify a proxy. How does anyone else connect via GPS and send e-mail from their regular ISP POP account?

i have the same problem
so far i've used the workaround which is
that my isp (which is not my cellphone gprs isp but my cable isp)
have a www mail gateway so i can use IE to login to that and send my mails that way

Yeah! I do that, but when I reach the web mail page and try to click open an e-mail, nothing happens. So that is a dead end for me! There has to be a way around the SMTP issue. We'll figure it out!

Hi
Are you using the smtp address of your pop3 provider or your gprs provider?
My xda ii is connected via an orange uk sim and i use it to both send and receive email from my o2 and blueyonder accounts. In order to send from these accounts i have to use the smtp address of orange ie smtp.orange.net rather than the smtp addresses of my pop3 providers.
Hope this helps
Chris

Indeed it would help if I only had a means to find out the smtp server for my cell phone service provider. Believe me, I've tried and no one ate Telecom Italia Mobile (TIM) has a clue as to what I am talking about. I tried smtp.tim.br and smtp.tim.com.br but neither worked
Any clues...?

try something like relay.tim.it or they should have some data support.

According to an NSLOOKUP against their domain name, their primary mailserver is smtp1.tim.com.br - try that.
Fork.

Hi everyone!
Fidlling with the smtp settings, I finally found out how to send mail over a GPRS connection using your ISP's pop mail account.
Everyboy, when set up an account, must fill in the pop.ispserver.com and the smtp.ispserver.com. It so happens that using the GPRS smtp (those who have one) or using pop relay, is trcky and does NOT work! The solution is:
1. Goto Inbox
1.1. Select Accounts
2. Select the account you want to edit (presumably the account you been able to download e-mail but didn`t allow you to send e-mail)
3. Enter you POP mail e-mail address (step 1/4)
4. Enter user info (name, user and password) (step 2/4)
5. Enter account info (type is POP3 and name will be grayed) (step 3/4)
6. Server Information (step 4/4) critical step
- fill in your pop account info (pop.ispserver.com)
- fill in your smtp account info (smtp.ispserver.com)
- leave domain blank!
6.1. Click Options and don`t check anything! Goto step 2/3
6.2. Select (checkmark) outgoing e-mail server requires authentication
- Do NOT check Require SSL connection
- Select Only display messages from the last X days, if you want
Click NEXT and you are good to go!!!
It worked fine for me with TIM in Brazil and Cingular in the US! Some POP3 services don`t allow this kind of connection!

E-mail (gmail) on a non standard port?

On my Prophet I would like to use my Gmail next to my Hotmail account. I've enabled POP in my Gmail account and I tried to set it up on the phone. However, Gmail requires usage of port 995 for pop and 465 for smtp. There is no setting for the port on the Prophet. I tried inputting pop.gmail.com:995 and smtp.gmail.com:465 for the servers but that made no difference (it 'connects' but asks me for my login info while 'loggin on...' and yes I've tried it with and without @gmail.com and retyped my password several times).
Does anybody have a work around? Or.. an option I've missed? Or.. an hack to make it possible to use a different port? Or.. a name of an e-mail application that works on Windows Mobile that provides this feature?

Here, this is the way to set up GMail:
In the Server Information, click Option, and in the "Require SSL connection" box, check/enabled that option. Also, below it, check "outgoing mail requires authentication."
With these two enabled, GMail will work fine.
One last thing, you can only select "Get message header only". If you select get entire mail, once you download your mail to your PPC, you cannot download the mail anymore in your desktop via Pop3.
For Wifi connection, I would recommend you specify larger size of header to download, I use the max 999 KB of message body.
For slower connection like GPRS, I set mine to only download 10 KB of message body.
Hope this helps.

That's weird.. I tried what you propose but as I said it would keeps asking me for my login information? Since those are correct I assumed it was due to the fact that I didnt set the right port number anywhere?
Anything I'm overlooking here then?

Not sure what you miss. I will recommend you just delete that mail box and re-create it again. If it does prompt you for login information, I guess there is a chance you typed the wrong pwd.
But it should work fine. You can use your login without the @gmail.com

Does it work for you? On your Prophet?
Here's what I do @ Outlook E-mail:
* Menu | Tools | New account
* Enter e-mail address: flyingd*[email protected]
* Auto configuration (never goes past Download..) --> Next
* Your name: Full Name
Username: flyingd*tchman [or] flyingd*[email protected]
Password: Password (includes one capital)
* Account type: POP3
Name: gmail
* Incoming mail: pop.gmail.com
Outgoing mail: smtp.gmail.com
Domain:
* Options
Connection: The Internet (= T-Mobile GPRS)
Checked SSL connection
Checked outgoing mail requires authentication
* Finish
Then it goes 'connecting' followed by 'loggin on..' and it keeps asking me for my incoming E-mail username and password?

yes, i just verified my config with yours, line per line.
I have also my password saved there, and limit to 10KB header of message to download over the GPRS link.

Um, this is not a free solution, but you can also use Flexmail 2007, which is an excellent client and supports port changing and everything under the sun.

Does everything under the sun include checking for new e-mail say every minute and reporting new e-mail to the 'today' screen?

It can check for new email every minute.
It doesn't have a Today screen plugin which is one of the main faults of the program, I guess. However, it has the ability to stay minimized in the System tray next to the Wifi icon and it has the ability to notify on each new email so I guess it can tell you when you have new email.
I don't check for my mail every minute and usually use it with my Wifi connection so its perfect for me.
But it can do those things which you mentioned

Cannot Connect to yahoo Mail on G1 using Hero. And No sound from speaker.

I have
G1
FW 1.5
MLIGN-HeroV3.0
I can't log into yahoo mail.
does it have something to do with a port? it's on port. 995.
And when I play music, it plays from the speaker that you hear from.
Not the one in the back.

Do you have Yahoo's paid service or just using the free version of yahoo mail? If you don't pay for the extra upgrade you can't get yahoo emails on your phone.

psychoace said:
Do you have Yahoo's paid service or just using the free version of yahoo mail? If you don't pay for the extra upgrade you can't get yahoo emails on your phone.
Click to expand...
Click to collapse
oh so i have to pay for it? where do I pay? I just use the e-mail feature on the G1 like Gmail.

Go to yahoo mail and they have a plus plan that allows pop3 access.

psychoace said:
Go to yahoo mail and they have a plus plan that allows pop3 access.
Click to expand...
Click to collapse
But I was able to log on before with my other firmware. this is super weird lol.

Wierd cause me and a lot of people have never been able to get yahoo mail on our phones through a normal email app on an android phone.

psychoace said:
Wierd cause me and a lot of people have never been able to get yahoo mail on our phones through a normal email app on an android phone.
Click to expand...
Click to collapse
Okay here is the procedure on how to get the free version of Yahoo mail WORKING on your G1.
Make Sure your WiFi Connection is turned OFF first, before you tell me this does not work.
Go to your Email icon > Press Menu > Add Account
Type in your full yahoo email address including @yahoo.com
Type in your password
Go to manual setup > Press IMAP account and change to these settings....
Incoming server settings
Imap server - imap.mail.yahoo.com
port - 143
security type - TLS (if available)
Press Next, It will check your incoming server settings, then it takes you to the Outgoing Server Settings
Outgoing Server Settings
SMTP Server- smtp.mobile.mail.yahoo.com
port - 25
security type - TLS (if available)
* check Require sign-in
Press Next, Verifying Out Going Settings, Press Next at Account options unless you need to change a setting.
Give your account a name (optional ) - i called my Yahoo Mail and click Done
Hope this works out for those that could not get this done.

Press1Now said:
Okay here is the procedure on how to get the free version of Yahoo mail WORKING on your G1.
Make Sure your WiFi Connection is turned OFF first, before you tell me this does not work.
Go to your Email icon > Press Menu > Add Account
Type in your full yahoo email address including @yahoo.com
Type in your password
Go to manual setup > Press IMAP account and change to these settings....
Incoming server settings
Imap server - imap.mail.yahoo.com
port - 143
security type - TLS (if available)
Press Next, It will check your incoming server settings, then it takes you to the Outgoing Server Settings
Outgoing Server Settings
SMTP Server- smtp.mobile.mail.yahoo.com
port - 25
security type - TLS (if available)
* check Require sign-in
Press Next, Verifying Out Going Settings, Press Next at Account options unless you need to change a setting.
Give your account a name (optional ) - i called my Yahoo Mail and click Done
Hope this works out for those that could not get this done.
Click to expand...
Click to collapse
i followed your instructions but when its checking incoming server settings i get "TLS required but not supported by server" msg.

Midnight scarab said:
i followed your instructions but when its checking incoming server settings i get "TLS required but not supported by server" msg.
Click to expand...
Click to collapse
Midnight scarab, The reason why you are getting this message is if you chose TLS (Always). I tested it with that setting and got the same message "TLS required but not supported by server". Try it again hope that helps.

Press1Now said:
Midnight scarab, The reason why you are getting this message is if you chose TLS (Always). I tested it with that setting and got the same message "TLS required but not supported by server". Try it again hope that helps.
Click to expand...
Click to collapse
told me invalid username or password like it always had. I logged onto the web version just incase to see if it was still good.

psychoace said:
told me invalid username or password like it always had. I logged onto the web version just incase to see if it was still good.
Click to expand...
Click to collapse
Psychoace, the only thing I know of that would cause the invalid username or password is having the wifi connection turned on. The initial setup needs to be done over a 3G connection. If that does not work let me know and I will try to help you out some more..

Thanks a TON! As always I searched all over but should have came to XDA in the first place

EMAIL setup for NTLWORLD (Virgin) on O2 please?

Hi there,
I had the EMAIL working ok until Virgin updated their EMAIL setup a couple of months back, but now I seem to be having trouble whatever I try (keeps int deleting EMAIL's + having problems sending/receiving sometimes).
Thanks, Mark.

Check your settings:
Your Name
Your name as you would like it to appear to others when you send them an e-mail. We recommend entering your real name, although any name can be used.
E-mail address
Your Virgin Media e-mail address. Remember that the part after the @ symbol should correspond to your type of account, e.g., [email protected].
Account Type
POP3
Incoming mail server
pop3.virginmedia.com
Outgoing mail server (SMTP)
smtp.virginmedia.com
User Name
Use entire e-mail address.
e.g., [email protected]
Password
Enter the password for your e-mail account. If you don't know the password for your account you can reset it using the forgotten password tool in My Virgin Media.
Require logon using Secure Password Authentication (SPA)
Unticked/No

Thanks for that,
Is that an updated version (since they changed things a couple of months back) or working setups off your phone?
Also I had an O2 address (mail.o2.co.uk) on the outgoing server, as I had trouble sending in the 1st place and this cures things?
Also should the setup be the same for @virginmedia.co.uk addresses as @ntlworld.co.uk ones?
Cheers.

mark in essex said:
Thanks for that,
Is that an updated version (since they changed things a couple of months back) or working setups off your phone?
Also I had an O2 address (mail.o2.co.uk) on the outgoing server, as I had trouble sending in the 1st place and this cures things?
Also should the setup be the same for @virginmedia.co.uk addresses as @ntlworld.co.uk ones?
Cheers.
Click to expand...
Click to collapse
Dude just got to the virgin media website and have a look at the email help page. It's really not that difficult.

M3PH said:
Dude just got to the virgin media website and have a look at the email help page. It's really not that difficult.
Click to expand...
Click to collapse
I know - I've done that in the past and with the settings they give it would only let you receive EMAIL's and not send them.
I'm not sure if the settings on there are just for mobiles on the Virgin network?
I wanted to be able to send/receive EMAIL's with O2.
I would have looked on the Virgin site myself if I had not tried them in the past and not bothered people on here.
That's the reason that I had to use the mail.o2.co.uk address for the outgoing server before (as it would not send EMAIL's from the settings they supplied on Virgin's site).

Nope - just tried the settings supplied for the NTLWorld EMAIL address on the Virgin site and they still don't work Dude (saying to check my account information when sending/receiving).
Mark.

mark in essex said:
I know - I've done that in the past and with the settings they give it would only let you receive EMAIL's and not send them.
I'm not sure if the settings on there are just for mobiles on the Virgin network?
I wanted to be able to send/receive EMAIL's with O2.
I would have looked on the Virgin site myself if I had not tried them in the past and not bothered people on here.
That's the reason that I had to use the mail.o2.co.uk address for the outgoing server before (as it would not send EMAIL's from the settings they supplied on Virgin's site).
Click to expand...
Click to collapse
If i remember correctly to send now you have to use ssl encryption on the smtp connection and specify the same log in details as for the incoming pop connection (the smtp servers are no longer open). The reason for this is that when it was ntl/blueyonder the smtp servers would only respond to certain ip address' so any further security was not needed.
Nope - just tried the settings supplied for the NTLWorld EMAIL address on the Virgin site and they still don't work Dude (saying to check my account information).
Click to expand...
Click to collapse
i just read the latest post. The ip restriction may still be enabled so you may be screwed.

Ok - thanks for that.
Mark.

if you are using a data connection then set it to mail.o2.co.uk and make sure the connction is using o2 mobile
if you are using wifi at home thru the VM connection then you can use smtp.ntlworld.com

I had the same problem when Virgin introduced there "improved" email and this is how I solved it....
!!!!!! NOTE: REQUIRES A GOOGLE (gmail) ACCOUNT FOR THIS TO WORK !!!!!!!!!!
​Create your account along the lines of -
Email Address - [email protected]
Name - Fred Bloggs
Account Display Name - Ntlworld
Incoming mail server - [email protected]
Account type - IMAP4
User Name - [email protected]
Password - *****
Save Password - YES
Outgoing (SMTP) mail server - smtp.gmail.com
Outgoing mail server requires authentication - YES
Use the same user name/password for sending email - NO
Outgoing Server login - [email protected]
Password - *****
Save password - YES
You then then tailor the size/frequency of the messages to your choice.
Regards,
Alan

nalab1 said:
I had the same problem when Virgin introduced there "improved" email and this is how I solved it....
!!!!!! NOTE: REQUIRES A GOOGLE (gmail) ACCOUNT FOR THIS TO WORK !!!!!!!!!!
​Create your account along the lines of -
Email Address - [email protected]
Name - Fred Bloggs
Account Display Name - Ntlworld
Incoming mail server - [email protected]
Account type - IMAP4
User Name - [email protected]
Password - *****
Save Password - YES
Outgoing (SMTP) mail server - smtp.gmail.com
Outgoing mail server requires authentication - YES
Use the same user name/password for sending email - NO
Outgoing Server login - [email protected]
Password - *****
Save password - YES
You then then tailor the size/frequency of the messages to your choice.
Regards,
Alan
Click to expand...
Click to collapse
Sorry, but just checking - you have to setup a GMail account for this to work - I was wondering when you send somebody a message if it shows as from the NTL World EMAIL address or the GMail one?
Cheers, Mark.

Hi there,
Thanks for all the replies - I think I may have sussed it now with a combination of peoples replies and also using O2's server for the outgoing mail.
I can now send/receive + also delete EMAIL's off the server so they don't come through on my PC once I have deleted and done a send/receive on the phone.
Cheers, Mark.

I was also wondering about the IMAP4 setting on the mobile - does this mean that everything on the server is also stored on the phone as well, so you have old EMAIL's on your phone as well?
Does this slow the HD2 down, as it would be handy to have some of the older EMAIL's in folders on the phone.

It sends it from the gmail address.... All I have got in my folders is the stuff in my inbox... BTW what settings did you end up using for both the outgoing and sending?
Regards,
Alan

Hi there,
I got these settings E-Mailed from Virgin in the end (like the ones posted by somebody else earlier, but with info on the SSL + ports etc (not that I think you can setup the ports on the HD2).
It seems to work all ok now with even being able to delete messages off the server as well.
Cheers, Mark.
Thanks for getting in touch with the Virgin Media Support team.
The details for your email account settings are below.
Incoming Mail Server - pop3.virginmedia.com
Outgoing Mail Server- smtp.virginmedia.com
Username - Full email address including @ntlworld.com
Password - Your email password
Outgoing server requires authentication - Yes
Incoming Server Port - 995
SSL Required - Yes
Outgoing Server Port - 465
SSL Required - Yes
If you are going to be receiving emails to more than one device you will
need to use 'Recent' mode in order to facilitate this. To do this simply
add 'recent:' to the start of the username in your account settings on
your email client so if your username was '[email protected]' it
would become 'recent:[email protected]'.

[Q] Droid Email Setup

Hello everyone. I cannot figure out how to add my second email to my droid. I have it rooted with the liberty 1.5 rom and figured out how to do the hotmail but my other pop3 I cannot figure out.
Here is the instructions from the website.
PC Client Setup Information:
POP3 (inbound mail) Server: mail.ar15.com
SMTP (outbound mail) Server: mail.ar15.com
- User name and password are case sensitive.
- Your password must be 4-16 characters long.(alpha-numeric)
- For security, we require authentication for outbound (SMTP) mail. check "MY SERVER REQUIRES AUTHENTICATION" in your mail client under server settings.
- Please set the email check timer to be 10 minutes or more.
I enter in all of my info but cannot find any part where It asks for the SMTP. Under security type I see
none
SSL
SSL (accept all certs)
TLS
TLS (accept all certs)
I can get passed the ingoing email screen but when it comes to the outgoing email screen I get this message: Unable to open connection to server
Any help? I had it set up before I rooted but not cannot get it dialed in.
Thanks

No one?
Please help as this is super important I get it working..

I would go back in to settings>accounts> and click on that account. then select outgoing server, and try it without verifiy certificate, then if that doesnt work, try it without authentication.

vzt said:
I would go back in to settings>accounts> and click on that account. then select outgoing server, and try it without verifiy certificate, then if that doesnt work, try it without authentication.
Click to expand...
Click to collapse
I have tried that and it did not work

Anyone else? There is no place on the outgoing screen that says anything about server authentication

Bump Thanks