Related
Hello!
I have a Ipaq 614C and I have a problem. When i install the TomTom i can't connect to the GPS. In the HP asset's it appear GPS: Present but in the status appear disable.
Anyone can help me.
Thanks.
John
Check in TOMTOM which GPS com port it's using. Then change to same port
as set in Settngs->Systems-> External GPS -> Programs com port.
I dont use Tomtom myself but I've used so far Google Maps and NAv4All and it works fine without any changes.
Good luck.
On my ipaq 614, the default com port for the gps is port number 6. And it works fine with that.
im also having some GPS difficulties with 614c: i already tried it with igo8, tomtom navigator and latest google maps. it finds satellites very slowly and rarely, mostly never. anyone got an idea?
t
tibyke said:
im also having some GPS difficulties with 614c: i already tried it with igo8, tomtom navigator and latest google maps. it finds satellites very slowly and rarely, mostly never. anyone got an idea?
t
Click to expand...
Click to collapse
did u try always out of the house in a open space?
most of the ppl don't know that u don't have GPS signal in close space.
second of all, first download with quick gps latest infos, after that start igo, it will be more quicker ...
chrees.
klaxhu said:
did u try always out of the house in a open space?
most of the ppl don't know that u don't have GPS signal in close space.
second of all, first download with quick gps latest infos, after that start igo, it will be more quicker ...
chrees.
Click to expand...
Click to collapse
of course i tried it in open air, and at night on the balcony with no success. i will try quick GPS, thanks for your advice!
t
quick gps?
klaxhu said:
did u try always out of the house in a open space?
most of the ppl don't know that u don't have GPS signal in close space.
second of all, first download with quick gps latest infos, after that start igo, it will be more quicker ...
chrees.
Click to expand...
Click to collapse
Hi all, mine did not come with any quick GPS installed, the older (tomtom related) version from the 6915 does not work on that device any longer, where did you get quick gps? or is it hidden somewhere..? Since there is no navi software installed, only google maps..
txs
From my personal experience with it, it took absolutely FOREVER to connect to a satellite the very first time I tried. Took about 7 "cannot find a signal" messages before I finally snagged one.
After that, it was ~20 seconds to connect every time.
I really dont know what the deal was, but after that initial connection it seemed perfectly fine.
So my advice is, try again for a little while.
I also have problems with GPS on HP 614c. But the problem probably not in the chip, and in programs as Oziexplorer and Google Navigator satellites catch and precisely defines a site, and Navitel works through time and that in a minute satellites as though fade and data cease to be updated, Garmin in general satellites does not see. Firmware update has not helped. Anybody has ideas?
p.s. sorry for my english
With program Navitel has understood, the reason was in program MultyDID, it blocked access to keyboards and deformed a signal from satellites, Garmin does not function.
rainerrabe said:
Hi all, mine did not come with any quick GPS installed, the older (tomtom related) version from the 6915 does not work on that device any longer, where did you get quick gps? or is it hidden somewhere..? Since there is no navi software installed, only google maps..
txs
Click to expand...
Click to collapse
http://rapidshare.com/files/125147036/IPAQ_600_GPS_Quick.zip.html
ENJOY
Hi
I've had the same problem with iGO8. You have to change the sys file in the iGO directory on the storage card. Here what I have there:
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
[gps]
port=6
baud=57600
set_messages=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
EREZYAD said:
http://rapidshare.com/files/125147036/IPAQ_600_GPS_Quick.zip.html
ENJOY
Click to expand...
Click to collapse
Could you upload this GPS quick to the forums?.. its not available @ rapid..
Thx
DSwarP said:
From my personal experience with it, it took absolutely FOREVER to connect to a satellite the very first time I tried. Took about 7 "cannot find a signal" messages before I finally snagged one.
After that, it was ~20 seconds to connect every time.
I really dont know what the deal was, but after that initial connection it seemed perfectly fine.
So my advice is, try again for a little while.
Click to expand...
Click to collapse
I agree with all these comments and the above regarding open space. GPS does indeed require a clear view of the sky... but one thing not so often said is that GPS needs a clear view of the NORTHERN sky... most of the GPS satellites are in a geostationary orbit above northern part of the planet.
To the guy who has tried leaving the phone on the balcony... I suspect your balcony is south facing (very nice).
I have also found that the longer it is since your last fix, the longer it will take to get a fix. GPS satellites only broadcast their "here I am" messages every 30 seconds and it is mostly down to luck whether your phone is listening for the right satellite at the right time. That's why it takes a while to obtain a GPS fix on all devices. QuickGPS and other software tries to expedite the fix by allowing the phone to calculate which satellites will be the right ones to listen out for, based on a daily positions log of the GPS satellites (called ephemera data).
GPS does work quite well on the 614c (I use tomtom 6.3 and Google Maps, both extensively)... but it does often take a long time to get a fix - sometimes even 10 minutes.
hipppo said:
I agree with all these comments and the above regarding open space. GPS does indeed require a clear view of the sky... but one thing not so often said is that GPS needs a clear view of the NORTHERN sky... most of the GPS satellites are in a geostationary orbit above northern part of the planet.
To the guy who has tried leaving the phone on the balcony... I suspect your balcony is south facing (very nice).
I have also found that the longer it is since your last fix, the longer it will take to get a fix. GPS satellites only broadcast their "here I am" messages every 30 seconds and it is mostly down to luck whether your phone is listening for the right satellite at the right time. That's why it takes a while to obtain a GPS fix on all devices. QuickGPS and other software tries to expedite the fix by allowing the phone to calculate which satellites will be the right ones to listen out for, based on a daily positions log of the GPS satellites (called ephemera data).
GPS does work quite well on the 614c (I use tomtom 6.3 and Google Maps, both extensively)... but it does often take a long time to get a fix - sometimes even 10 minutes.
Click to expand...
Click to collapse
Very nice. I woud've never thought about that. However, i think geostationary orbit is when the satelite goes around the equator with the same angular speed as the rotation of the Earth. So these satelites actually go around in an orbit perpendecular to the equator. Yesterday i tested and got 2 satelites inside a room with north windows. Very cool. Do you use quick GPS. I installed it and downloaded the data for the next 7 days. I didn't notice any improvement. I use DESTINATOR 7 and Maspware GPSmeter 5.I don't really get it - who manages the data downloaded by Qgps - windows drivers or the gps software itself.
More GPS thoughts
Axlastro - the ephemeris data that QuickGPS and other programs download is nothing to do with Microsoft/Windows or with HP. It is official data on the positions and movements of the satellites in the GPS network. Provided ultimately by some government department, probably American.
If you have not noticed an improvement over a period of several days, I'm not sure why this is. This old posting might help you.
Ephemeris data is also actually transmitted by the satellites themselves. This is why, when you have recently had a fix, it is usually quite quick to get another one. Programs like QuickGPS are only therefore useful if it's been a while since your last fix.
Thanks. I googled the topic and got some detailed explanations.
http://wmexperts.com/articles/gps_vs_agps_a_quick_tutorial.html
I also found a thread that says that QUICKgps doesn't work with the ipaq.
http://mobilitytoday.com/forum/showthread.php?t=16767
So that's why i don't see improvement. However neither of the people on that forum has managet to improve their fix times. Can you tell me wich program exactly you are using?
strange. i never had problems with gps. very fast . newest firmware from hp site ,and 3 different roms,original 6.0 and 2 roms with 6.1 . Igo,garmin etc.
Some more info
Really. Which program do you use, so i can try with it too.
I spoke to HP support and they said that it depends on the GPS software if it will use the aGPS function, so we have to check if the software we use is compatable with tha Qualcomm 6820 gps chipset of the ipaq.
Install this
http://uploading.com/files/YI4IJTCC/PART1-GPS Quick.zip.html
Now update the app
Install this
http://uploading.com/files/15FMK62B/PART2-QuickGPS.CAB.html
Now update the second app but on this update you will get at 79% a fail note
Ignore it and check your GPS...
from my testes you will get a better hot fix (time )
If you are after SR or cold fix update the second app (the one that fails)
Good luck
Ps at the end it will look like this
sorry about quality of the move ,I had to upload to youtube ….so I compressed the file
http://www.youtube.com/watch?v=qYbVnuwvluo
My Tomtom gps is not working it says waiting for a valid gps signal and wont connect. When i go to the gps status in Tomtom it shows the bars but they are grey and dont move it just freezes can anyone help me on this?
jbatu said:
My Tomtom gps is not working it says waiting for a valid gps signal and wont connect. When i go to the gps status in Tomtom it shows the bars but they are grey and dont move it just freezes can anyone help me on this?
Click to expand...
Click to collapse
You made sure all the configurations are correct?
If so you might need to await a couple of minutes while you move around or are open to a clear sky to receive a signal. To help improve the satellite lock time try searching for a GPS launcher. There are some specific for Tom Tom.
These launchers not only initiate the GPS but once it is warmed up it will run Tom Tom after. It doesn't really help 100% but it does help speed up the lock time abit.
tnx> i got it working but its not very accurate on the position. sometimes its really off
I had the exact same issue. My external gps antenna came one day later than the phone did. I plugged the antenna in, and then it found two satelites indoors. Unplugged it, and it stayed working. I walked down the street it sorta tracked my position. Hope this helps anyone else having this issue..
Edit: I found this thread via a google search and didn't realize I was in a Titan thread. My phone is the Polaris/Touch Cruise. Sorry...
I can't get a satellite lock on my HTC Snap.
I have enable "use GPS" in google maps. google maps will search for satellites and after sometime come back saying weak signal & some recomendations to look for clear view of the sky.
Garmin XT also can't search GPS satellites. I install GPS Test, it seems that there's a GPS hardware but somehow the signal reception is super weak.
I have sent my Snaps to HTC service center and the best thing they can do is change the mainboard. This also show no result.
Anybody, please help. i'm starting to get frustrated with this GPS issue...
Bing GPS
I use the Bing app and have similar issues establishing GPS signal. This is my first GPS device so I'm not sure if this is normal, or if the phone is crap for GPS, or if I'm doing it wrong. I try to keep the QuickGPS updated, but that doesn't seem to help. I thought AGPS was supposed to be fast, but faster compared to what? Maybe this is 'fast' for GPS. I have seen friend's full on GPS devices and they seem to pickup pretty quick. So... who knows?
One thing to definitely try is make sure quickgps is up to date and automatically downloading. garmin could NOT find my location without that up to date and it would show one red bar signal strength. once i loaded up quickgps, updated it, and ran garmin again, full green signal.
It's The GPS Hardware ...
I've tried it all with my Dash 3G -- and concluded that it's the GPS in the phone that is garbage. I've since switched back to my trusty OnCourse Bluetooth GPS and I get a lock in Google Maps in less than 30 seconds and in Garmin XT in less than 10. IMHO, the GPS is certainly a weakness on this phone.
It finally sunk in for me when I lost signal 9 times while walking a few miles down Beacon Street in Boston. Holding the phone in my hand it kept dropping the signal over and over again. So I gave up. Built in GPS is handy in a pinch (when you have 30 minutes to wait for it to find a signal) but for serious navigating I use my Bluetooth GPS exclusively now.
No true at all. the gps in the Ozone is amazingly fast.
drewcam888 said:
No true at all. the gps in the Ozone is amazingly fast.
Click to expand...
Click to collapse
I completely agree. Simply because something is not working like it should for these others does not mean that the GPS is not good. I use garmin xt with my ozone and its is extremely fast at updating my position as i'm driving along.
Problem solved
Let say that i'm in a really bad luck. this is my first GPS device and its not working. After the 2nd time come out from the service center (2nd concecutive mainboard), then the GPS is functioning, normaly....
my maple can get lock on GPS signal quite fast. with AGPS updated, it can get signal lock within seconds (given you have a clear sky view). i found that it could takes some time for Garmin XT to get GPS signal, so I use GPS Test to speed up the process then start the Garmin XT.
so for those who can't get GPS signal. it's definitely your hardware. I also found that the online customer service officer at HTC is just a mere lips service / useless. they keep telling me to be patient and patient without real action.
There's a free GPS testing tool for Windows Mobile called GPS Test. Once that set up, you can find out which serial port is used by the GPS receiver in your Windows Mobile, and set Google Maps GPS setting accordingly. Once it's set up, Google Maps can easily find multiple satellites if you're on open space. Once it's using GPS, your location on Google Maps will be a pin point, rather than a large circle denoting your approximate location.
PS: Found out with GPS Test that my GPS receiver in my Snap is using COM4 port at 9600 bps
Sincerely,
Paul Pambudi
WIND Mobile HTC Maple users not getting GPS working PLEASE READ!
I went through four HTC Maples (two accounts each 1st phone was a warranty exchange for another non-related problem). Each of the four Maples could not lock in single GPS satellite. WIND tech support had no clue after many calls and tests run at their tech support offices in Toronto. WIND recommended that I get in contact with HTC directly to see if they might have a solution.
One call to HTC started the ball rolling and setup a trouble ticket. Within 3 days and about seven call backs to trouble shoot, HTC had the solution and both of our Maples now have fully functioning GPS with Google Maps.
The problem was in the ROMs that had an old version of Google Maps (both their WM 6.1 and WM 6.5 HTC Maple ROM for WIND accounts).
Solution: using the Maple's browser go to m.google.com/maps and install the latest version. Problem solved!
HTC customer service in North America ROCKS!!!!!!!!!!
Will I buy another HTC product? HELL YA!!!
Here's a gem!
My Snap used to take 30-40 seconds on a cold start to get a location lock (with aGPS turned on).
I installed the attached CAB (which just adds some registry keys, also found here: Here), which makes the phone use Google's aGPS server, and got a cold start GPS lock in 7 seconds... indoors!
arpitp said:
Here's a gem!
My Snap used to take 30-40 seconds on a cold start to get a location lock (with aGPS turned on).
I installed the attached CAB (which just adds some registry keys, also found here: showthread.php?t=544421), which makes the phone use Google's aGPS server, and got a cold start GPS lock in 7 seconds... indoors!
Click to expand...
Click to collapse
The thread you listed for registry key changes doesn't appear to work.
Any chance you might be able to list it again?
Thanks.
AE!
AquiEsta! said:
The thread you listed for registry key changes doesn't appear to work.
Any chance you might be able to list it again?
Thanks.
AE!
Click to expand...
Click to collapse
Sorry, the link was bad. I'm used to posting links in that format from another forum. Anyhow, it's fixed in the last post, and here it is as well:
http://forum.xda-developers.com/showthread.php?t=544421
arpitp said:
Sorry, the link was bad. I'm used to posting links in that format from another forum. Anyhow, it's fixed in the last post, and here it is as well:
http://forum.xda-developers.com/showthread.php?t=544421
Click to expand...
Click to collapse
Thanks for updating the link.
I have tried both of the CABs for the non Nokia and both make no difference if you
can't get a GPS lock. AGPS simply does not work using the latest Google maps CAB
available.
The "FF Ultimate aGPS Tweak_supl.google_Generic.cab" actually makes Google Maps
take forever to just start up after being installed and still no location is updated
indoors. Also, the phone will not snyc now with the desktop and this is after three
soft resets.
Even worse is the fact the phone now runs slow as hell. Everything takes forever
to open and is VERY sluggish.
Installed the other CAB "FF Google aGPS Settings Generic.cab" and still the same
problems. What could be the problem?
Finally got fed up with the POS CAB and uninstalled it. So far I've notice that the
phone has recovered its speed opening items and the right ones not like before
with that POS CAB which would cause all kinds of problems. Snyc now works
and so this looks like I'm back in business minus the fact I still can't get the aGPS
to work.
Oh well, you can't win them all...
AE!
Hi there,
two weeks ago I sent my magic to get it fixed, as the lcd was broken. They changed the lcd, vibrator and touch screen, and they updated the software (meaning a perfected spl and 1.6 official by vodafone).
Since then the GPS is not working. G maps, sygic, copilot, gps status, and others don't get signal. Sygic fails to autodetect it. GPS hardware is apparently working. I can activate it, and configuring manually in sygic I set android port at 9600 but to no avail. GPS status doesn't even load GPS values. I've waited longer than two hours sometimes.
I would like to know how I can access the GPS hardware setting, using better terminal emulator or linux console.
The problem is not the ROM, I rooted the phone and installed cyanogen ROB, and also flashed the radio. Is there something I can do?
Any ideas? Thanks in advance
I had the same problem, after they serviced my Magic, and today I send them the phone again, maybe they`ll fix it, or else I`ll sue them for incompetence (I live in Romania, so here things goes always wrong, I`m afraid)
it's exactely what has happened to me.
after I replaced the housing, the gps died.
no way to fix the signal: the gps is on but it dosen't find any sat.
I was wondering: where the gps antenna is located? is it the same for the gsm/umts one (i.e. the plastic part in the bottom of the back)?
please keep this up, we must find a solution
db
Hi, i just made this account to post this problem here and I hope I find help. My s5 is not rooted and brand new (3 days?) with the version 6.0.1. My phone does see the satellites but it doesn't locks on them so I don't have GPS at all except with WiFi and the other things but that is kinda useless and not accurate. If I really have to I would root my phone cause it's annoying as hell and I'm a traveller so I need that and I don't always have internet. Hope you can help me
Kind regards
Same problem, similar situation, using SM-G900A, Galaxy S5 with AT&T. Satellites show with GPS Tools app, but Google Maps and Waze don't find GPS location. Tried many things, including factory reset. No joy...