Related
I read, and read, and read. Most of the chefs cook this mod into their ROM's but i am using the desire from modaco, so i`m left out.
As far as i understand, you have to create 3 Partitions on the SD Card:
- swap
- Ext2/3?
- FAT32
After that you do some shell editing and that's about it.
I`m sure some are wondering as i do if:
- Can i create the partitions in Windows and then place the card back into the phone?
- If i install apps2sd is backup still required? Or will a new ROM Flash automatically use the installed apps?
So this is an appeal to someone with the heart and knowledge to help us out with a guide.
Thanks
Found this thread, so basically it should work after flashing that ROM on top of the current OS.
You do not need the swap partition... just an ext partition (size your choice)... the rest vfat... and you partition it using Amon_RA's recovery...
And when you flash a new ROM, you might need to re-enable App2SD in that ROM to see the apps installed in the sd ext partition...
a related question.... can the files of the existing apps be moved from /data to the new partition /sd and still function.....or do they need to be reinstalled?
I highly doubt you can just move them...
britoso said:
a related question.... can the files of the existing apps be moved from /data to the new partition /sd and still function.....or do they need to be reinstalled?
Click to expand...
Click to collapse
tried this... was not successful!
I can't even get the "SD Secondary" to show up?!?
I've wiped everything
partitioned:
swap 0
ext 640
then installed a fresh rom I copied over and no "SD Secondary" showing up on the phone... any ideas?
I followed these steps exactly... (minus the memory number difference)
part 1: http://www.youtube.com/watch?v=_P3T2mf5Pu8
part 2: http://www.youtube.com/watch?v=FdKBmWU-ALg
Guys,
If you want to use A2SD. Enothmer's new ROM seems to be the easiest at the moment, BUT many smart devs are putting efforts towards this.
Basically.
Copy your SD to your computer.
Partition it via Recovery.
512mb 96 swap our my settings
do an EXT2 to 3
I did a 3 to 4, you can use 3 though.
Re copy your stuff from computer BACK to your SD.
WIPE everything via recovery. factory, EXT partition, battery, davlik.
Flash Enom's 1.7.1 rom, Log in, Go into spare parts, click disk mgmt, check A2SD stuff, reboot. Your good to go. Use titanium back up, download, whatever.
Again, other good versions should be coming out soon. I think of the current models Enom's seems to be the easiest.
Yeah I pretty much gave up on it for now... it will be more worth it in the future when I get a larger SD card and my list of install apps goes up. For now I just don't go download a ton of apps...
Thanks To ysgace and all dev.
this is not my job, just made easy to share.
So it's taken a lot of reading from a number of different places but I figured out how to modify the boot.img in the Odin CODE tarball in order to flash with an edited init.rc. I realize that with this power I could have simply built a2sd into the boot.img but one step at a time. So for now, if you want a2sd for Gingerbread (S5830XXKPE) then files and instructions can be downloaded using
http://www.multiupload.com/TBACWA4ZBH
Follow That step included
http://forum.xda-developers.com/showthread.php?t=1120168
fixed a2sd_enabler.sh.. thanks to tineprogramming
this is the easiest way.. just go to this>> CFROOT
Better Choice >>PSN CLEAN ROM
>>[KERNEL][STOCK GB 2.3.x] 06-11-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU
Give credit To them who build the best development.
Will this work with VillainROM?
and is this just a script or the entire Rom(modified for apps2SD) itself?
It did not work for me!
have anyone try it yet? review pls
guys i want this on my have i am on villianrom and have also created a ext 2 partition but getting access denied in dos prompt please help me guys please
Still trying for dark tremor
modified rom only work for extream a2sd hihihihi... still find the answer how to port dt on gingerbread
Hey budddy thanks a ton I used darktremors script and then used the APP2SD GUI now the question I have is in settings i can see 168 MB internal storage free, and when i look at titanium backup i can see the following
System ROM : 218 MB (43.3 MB Free)
Internal 189 MB (176 MB free)
SD Card 13.9 GB (10.4 GB Free)
SD card (a2sd) 1.91 GB (1.82 GB free)
my dalvik cache is on sd card so is settings displaying improper info or titanium backup please advice
DO NOT INSTALL THIS ROM I ENDED UP CURRUPTING UP MY 16GB SDCH CARD .. I HAVE GIVEN IT FOR REPLACEMENT.. I HOPE THEY REPLACE IT...
sorry for caps...
imranaryan said:
DO NOT INSTALL THIS ROM I ENDED UP CURRUPTING UP MY 16GB SDCH CARD .. I HAVE GIVEN IT FOR REPLACEMENT.. I HOPE THEY REPLACE IT...
sorry for caps...
Click to expand...
Click to collapse
Was not working for me as well tried for 3 days finally i created a 2 GB EXT2 partition and then rooted the phone and used this and works like a charm
the script never worked for me
http://forum.xda-developers.com/showthread.php?p=12069632#post12069632
hypergamer1231 said:
Was not working for me as well tried for 3 days finally i created a 2 GB EXT2 partition and then rooted the phone and used this and works like a charm
the script never worked for me
http://forum.xda-developers.com/showthread.php?p=12069632#post12069632
Click to expand...
Click to collapse
so do you have a2sd by Darktremor?
Whenever i try to create an ext2 partition in my sdcard, it is not being mount and i get a warning saying that the card should be formatted. if i give yes, it gets formatted as one single partition of FAT32.. Please help
I used MiniTool Partition Wizard Home Edition in windows for partitioning
for partitioning use gparted
Before upgraded to gingerbread ROM, it was 2.2.1 where there is a app name "link2sd" free from market, which it mount ext2 partition of sdcard and move per apps apk file to sdcard, of ext2 partition, this is more flexible then Darktremor.
Where with Darktremor, the external sdcard will never able to hot remove from phone and plug it back. Which make external sdcard pointless. remove sdcard card will kill / reboot the phone, given without sdcard, phone can not start up. Also slow performance issues.
Where link2sd allow you select large apk only link to external sdcard, when unplug sdcard the phone still works without reboot / halt.
http://www.xda-developers.com/android/move-selected-apps-to-sd-with-link2sd-app/
cheers
James
keijames said:
Before upgraded to gingerbread ROM, it was 2.2.1 where there is a app name "link2sd" free from market, which it mount ext2 partition of sdcard and move per apps apk file to sdcard, of ext2 partition, this is more flexible then Darktremor.
Where with Darktremor, the external sdcard will never able to hot remove from phone and plug it back. Which make external sdcard pointless. remove sdcard card will kill / reboot the phone, given without sdcard, phone can not start up. Also slow performance issues.
Where link2sd allow you select large apk only link to external sdcard, when unplug sdcard the phone still works without reboot / halt.
http://www.xda-developers.com/android/move-selected-apps-to-sd-with-link2sd-app/
cheers
James
Click to expand...
Click to collapse
Sadly it doesn't work on Gingerbread. It's a pity, this app is a must to whom owns an ACE.
dur09 said:
for partitioning use gparted
Click to expand...
Click to collapse
i agreed, always succeed with gparted
mastrone said:
Sadly it doesn't work on Gingerbread. It's a pity, this app is a must to whom owns an ACE.
Click to expand...
Click to collapse
me too, i didn't try darktremor a2sd yet... hope it works for gingerbread sgace 2.3.4
arronov said:
me too, i didn't try darktremor a2sd yet... hope it works for gingerbread sgace 2.3.4
Click to expand...
Click to collapse
I tried on KPH ROM (2.3.4) and it doesn't work either...
I tried too, and didn't work
Anyone got this to work already on 2.3.4 KPH?
mohdnurr said:
Thanks To ysgace
this is not my job, just made easy to share.
So it's taken a lot of reading from a number of different places but I figured out how to modify the boot.img in the Odin CODE tarball in order to flash with an edited init.rc. I realize that with this power I could have simply built a2sd into the boot.img but one step at a time. So for now, if you want a2sd for Gingerbread (S5830XXKPE) then files and instructions can be downloaded using
http://www.multiupload.com/TBACWA4ZBH
Follow That step included
http://forum.xda-developers.com/showthread.php?t=1120168
fixed a2sd_enabler.sh.. thanks to tineprogramming
Click to expand...
Click to collapse
Great job!
It is possible to do the same thing with 2.3.4 KPH?
I found so many noobs here in ace forum and so little developers and I want to help you. I come from optimus one forum and i like to help.
You need a custom recovery to create an ext partition and to make darktremor a2sd to worked. Amonra or clockworkmod recovery is the best. Then create an ext partition whether ext2, 3 or 4 then flash dta2sd from the darktremor a2sd thread here in xda(search it). The latest ver is 2753 beta 04.
Remember, without ext partition the dta2sd will not worked.
To check if your a2sd is working, download terminal emulator, press su then enter then type a2sd check.
Or download titanium backup agd check if it says a2sd space=???
Or the best way to check is by a2sdgui app, it is a official app from the dta2sd itself. If it says apps are on sd, then your a2sd worked. And if you guys still reducing memory even after moving apps to sd via a2sd gui app, its time to put the dalvik cache to your sdcard.
Fuh, thats a lot of writing on my phone. I love to help because i will buy galaxy gio soon.
Or maybe you guys should take a look at optimus one forum and learn how to make a custom kernel and rom there. Theres a very good thread on guiding how to build a custom rom and kerne. Im pretty surprise so many noobs here. Like i said i really like to help to improve this community
Sent from my LG-P500 using XDA App
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
ejebyte said:
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
Click to expand...
Click to collapse
try link2sd in the market,it's free,but once you've moved all u want to,boot into recovery and wipe cache partition and wipe dalvik,that MIGHT do the trick
one question, how do you want to partition your sd? i mean one fat or one ext partition? But seriously, one partition is a bad idea, i wouldnt recommend that.
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Ty5982 said:
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Click to expand...
Click to collapse
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
jwchips said:
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
Click to expand...
Click to collapse
@Ty5982, unfortunately it didn't work. It went badly and I lost the apps in sd-ext so I ended up restoring them..
@jwchips, thanks! Will try that one instead. Yep, I've read about the tools/apps that can be used to partition/format storage devices with EXT. Thanks again.
ejebyte said:
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Click to expand...
Click to collapse
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
greg17477 said:
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
Click to expand...
Click to collapse
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
ejebyte said:
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
Click to expand...
Click to collapse
ah ok, on TMOUS HD2 you might do not need an ext partition
greg17477 said:
ah ok, on TMOUS HD2 you might do not need an ext partition
Click to expand...
Click to collapse
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
ejebyte said:
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
Click to expand...
Click to collapse
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
colinmc8 said:
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
Click to expand...
Click to collapse
be sure to format both partitions as primary.
Hello,
I've installed ICS now without any problems, but after installing the data2sd script and then rebooting my phone gets stuck in the boot animation. Even though it's very beautifull eyecandy it really isn't doing much for me.
I did a full wipe! Clear data/factory reset, Clear dalvick cash, etc. Also Task 29 and used HD2 toolkit to create 250MB system partiton with 5MB cache
First I formatted my SD card (8GB class 10) with MiniTool Partition Wizard 7 completely as FAT32 then I partitioned it (with CWM recovery 4.0.0.0) to 2048MB EXT3 with 256MB Swap, formatted that partition again in MiniTool to EXT3
Then I flashed the ROM (NexusHD2-IceCreamSandwich Beta6) to my device without any problem. Booted ICS, rebooted into recovery and flashed Data2SD installer wich didn't give any errors either.
Booted again and now it's stuck in bootscreen, I've waited for at least 45 to 60 minutes before removing the battery and try everything again all over, but with an EXT4 partition just like Yank555 did.
I followed the instructions from this post without flashing APP2SD Killer first since that causes the market to 'hang on app install'
I know there are people how got it to work so it must be something I did wrong! Can anyone give me some good advice?
BTW FYI, I did previously use TyphooN Gingerbread 2.3.3 CM7 A2SD with 1GB EXT partition without any problems...
Hi,
For me it seems you're doing it right...
Your ext4 partition IS a primary partition ? I suppose yes, since CWM will do it that way when you use it to partition your SD card.
Just to be sure, you did reformat the ext3 partion to ext3, or the swap ? I don't know how DATA2SD will react to finding 2 "sd-ext" partitons (more than one ext2/3/4 partiton), never tried that before... If you don't intend to use any swap, you'd rather leave that one out in CWM (choose 0Mb)...
JP.
PS: If you want to use swap (hard swap on a swap partition) I can explain to you how to do that. If you want to do it using a swapfile (once DATA2SD is up & running, you can have a look here).
Tanks for your reply. I don't have much time this weekend due to Christmas shopping and everything But I determent to get this to work! And I won't stop till I do. I'm using this ROM for every day and I just need more space. I found there are more people with the same issue as me, so when I get it to work I'll post my findings in the main development threat as well. But I'll make sure to give you all the credit that is due...
Fixed it! Did had to use sort of a "work-around" but it's working and it's all good! That's most important! If anyone else is looking for the solution for this problem, this is what I used and what works for me!
http://forum.xda-developers.com/showpost.php?p=20439320&postcount=2379
Please give thanks where they are due, that is to the original poster offcourse and not me!
The fixed work-around is App2SD rite? I think it will be good if we can get Data2SD working. I think the latter is faster.
I also read some managed to get Data2Ext working in Tytung ICS Beta7 already. See this http://forum.xda-developers.com/showthread.php?t=1403710
PPKLP said:
Fixed it! Did had to use sort of a "work-around" but it's working and it's all good! That's most important! If anyone else is looking for the solution for this problem, this is what I used and what works for me!
http://forum.xda-developers.com/showpost.php?p=20439320&postcount=2379
Please give thanks where they are due, that is to the original poster offcourse and not me!
Click to expand...
Click to collapse
Yank555 said:
Hi,
For me it seems you're doing it right...
Your ext4 partition IS a primary partition ? I suppose yes, since CWM will do it that way when you use it to partition your SD card.
Just to be sure, you did reformat the ext3 partion to ext3, or the swap ? I don't know how DATA2SD will react to finding 2 "sd-ext" partitons (more than one ext2/3/4 partiton), never tried that before... If you don't intend to use any swap, you'd rather leave that one out in CWM (choose 0Mb)...
JP.
PS: If you want to use swap (hard swap on a swap partition) I can explain to you how to do that. If you want to do it using a swapfile (once DATA2SD is up & running, you can have a look here).
Click to expand...
Click to collapse
hey HD2 expert !! i have the same prob over here , installed data2sd after flashing the rom and stuckin at the boot screen ,,
-anyone find a solution !!!!!!
Hi,
how are you today? For me good, thanks for asking, ha ha ha hanb
It's alredy my second thread for today, all problems, wow.
So I will try to explain, like in the thread before, I got HTC HD2 and I have Mdeejay eVo on my sd card and I launch Android from WM6.5.
The Android which I use have already the data_1024 folder, inside data.IMG file which it use for storage the Androids apps, but from my research I find the news to some how edit my microsd card and set-up a Partition which be the sobstitute of the data_1024.
I will be glad to know HOW?
Like I said, I got my Android on sd and I try for a week to find the solution with no success, I try to make a ext3 partition on sd of 2048mb but the android do not see that partition. I can't flash anything because on my ROM is WM 6.5.
I also will be glad to make another data_2048 folder with inside data.IMG file, if the Partition can't be done.
Please guys let me know how do I have set-up the partition for the Android?
Thanks.
hmmm not really sure here, but you can make a back up of your SD card then use minitool partition to partition & create EXt3/ Ext 4 / Fat 32 partitions, try the links below they might help
mengfei said:
hmmm not really sure here, but you can make a back up of your SD card then use minitool partition to partition & create EXt3/ Ext 4 / Fat 32 partitions, try the links below they might help
Click to expand...
Click to collapse
before post here I already saw your thread and like I said I do not have MALGDR on my phone or CWM, also I don't know which type of partition need my Android but I am sure is not the last type of Androids which they have the folders; kernel, META-INF, sdcard (inside NativeSD) and system folder. My Android is whit rootfs.img with external data_1024 folder for storage system.
I used Gparted live and I made a partition of 2048mb of ext3 partition but the Android do not see the partition because somehow I can't make a link to it.
I want more storage for my Android and delete data_1024 folder so I try to figure out, with some help, how to do that?
Any ideas?
Use toporesize app on pc to expand your present data img size without losing present data. . To get more space. .No need for ext 3 and all
Search for topo resize
If youwant to use apps 2 sd or link 2sd app from market to use ext 3.. Then you can move apps to sd ... That is for nand installs. . You don't need that on sd builds. ...
You try native sd builds. . Fastest ever.sd builds. . You can boot from wm also . You need ext4 partition for it. ..
sent from my galaxy note 2 (7100)
pakure said:
Use toporesize app on pc to expand your present data img size without losing present data. . To get more space. .No need for ext 3 and all
Search for topo resize
If youwant to use apps 2 sd or link 2sd app from market to use ext 3.. Then you can move apps to sd ... That is for nand installs. . You don't need that on sd builds. ...
You try native sd builds. . Fastest ever.sd builds. . You can boot from wm also . You need ext4 partition for it. ..
sent from my galaxy note 2 (7100)
Click to expand...
Click to collapse
Thanks mate, this is something great!
So I do not need a special partition for my android, good to know.
I know the last Nand Androids are good but I have old phone with old Android and he work fine, I try to put Native SD Android on my sd but too complicated and I do not have so much time. At the moment I find Mdeejay very fast and good, I tryed AmeriCan Android, CM7 and 10 and really I am not comfortable with them like with Mdeejay, so it's ok like that. ! problem solver, I just try to update my kernel - http://forum.xda-developers.com/showthread.php?t=1976835 - and I am ok.
Thanks.
pakure said:
Use toporesize app on pc to expand your present data img size without losing present data. ....
Click to expand...
Click to collapse
End of the Party, Guys, I was happy to soon!
I used toposize to made data.img for my android but I got problems.
If I resize data.img system partition, first of all, I got the error on e2fsck (see the pic) and i have to click ok to compleate the operation and after that I put the data.img into Anrdoid forlder and I replace the original (backups before) but the Android do not turn on, he stuck in HTC Logo.
If I made a clean data.img with ext3 system partition and I replace the data.img into the Android folder, he do not turn on and he stuck in Android logo.
If I use the original data.img from the package the Android turn on normally.
Do I forgot to do something? Do I missing something?
sorry, I forgot the pic.... here we go...
eclyptos said:
sorry, I forgot the pic.... here we go...
Click to expand...
Click to collapse
you are keeping data .img in a folder?...data.img should be in android folder..no further subfolders...and delete that stupid ext3 partition..you dont need it.
try native sd..it is very simple (for you to dual boot with windows mobile):
you need ext4 partition..use minitool partition manager to create it
then put selected rom zip (like pacman hd2 rom..."the best rom") on sd card
put 4ext recovery folder on sd card..open it , click clcrad and haret inside...follow screen instructions to install rom
Reboot and boot the ROM by executing the usual clcrad and haret stuff inside the NativeSD folder.
thats it.
pakure said:
you are keeping data .img in a folder?...data.img should be in android folder..no further subfolders...and delete that stupid ext3 partition..you dont need it.
Click to expand...
Click to collapse
ohh, well, yes, the data.img is in Android folder, not subfolders or external folders, I said so because in my package of Mdeejay are 2 folders, Android and data_1024. The data_1024 is all ready done to make a fast boot instantly but if I do not use it Android make the clean data into his root folder.
About the partition you get confused a little bit because when I used toporesize to made a clean data.img file to use it in android folder, the app ask me in which system the file have to be, ext2, ext3 or NONE. So no 1 of this data.img worked.
I hope I clarifide, I do not have ext3 partition on sd, is the data.img. that's all.
pakure said:
try native sd..it is very simple (for you to dual boot with windows mobile):
you need ext4 partition..use minitool partition manager to create it
then put selected rom zip (like pacman hd2 rom..."the best rom") on sd card
put 4ext recovery folder on sd card..open it , click clcrad and haret inside...follow screen instructions to install rom
Reboot and boot the ROM by executing the usual clcrad and haret stuff inside the NativeSD folder.
thats it.
Click to expand...
Click to collapse
I don't know about that, currently I have a working Android (not jet set-up like I want too) but I will see if I sholud do all this stuff. I am not so deep in this stuuf and just reach when I reach now, get me tired. So I take in the consideration you advice but now I have to have 1 android working well.
Ok, some bad news:
I did in different way to set-up my storage image, I let Android to made a clean data.img into his folder, after he finished installation and start running well I take the data.img of 1GB and with toposize I resize the image to 3GB. Like I said before, he give me this crap error but I really do not understand why? If Android made a clean data.img in his folder which errors can be made?
So I click ok anyway and made this file and I replaced the 1GB with 3GB with unclarifide done error fix.
He works for feew hours, smooth and fast, I start installing appps and games. Like many games they ask for downloading some updated files so I start downloading 450mb for 1 game and after 20 minuts Android crashed and he do not turn on anymore, he stuck in Android logo.
Are you sure this crap "TOPOSIZE" working? or it's just ME?
Guys, please help, I get confused and I don't know how to do it.
Today I also try install on my android Chainfire and i can't install plugins for low storage so after few hours of serching I find this thread http://forum.xda-developers.com/showpost.php?p=16457164&postcount=14723 but after read what they saying I do not understand anymore which system file I have to resize to get more space AND to make working chainfire which I really need right now for few games!
Someone can tell me which files I have to resize? How? or Post the right thread? please.