Related
Do you use a screenprotector on your trinity? I do, one from Brando, but I don't like it and am thinking about removing it...
Is anyones screen already damaged?
Is it possible to put it perfectly at all ?! I mean I must be in a totaly sterile envoirement with gloves and special suit and God knows how and what skill I must have to put it right
My Trinity is one day old but I will surely remove it in a couple of days, can't look at it with this ugly bubbles beneath
The first thing I do when I get any new device is get a screen protector for it, and it goes on before I ever start using the device. I've gone through a lot of PDA's over time and one thing I can say is that you get better at putting on the protectors and you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
The best way to put the protector on is to carefully peel just a bit of one edge and line it up at the top of the screen. Then use the included card to slide the rest down the screen, the paper backing will peel off as you do this and it helps to prevent bubbles and dust getting on the stick side of the film.
If you don't like bubbles, try a brand that is not adhesive. Most people don't like the type that slips under the case but I do. I've been using NuShield protectors for a couple of years on 4 different PDAs and they are great IMO. I don't use a case (store in pocket) and NuShields are very durable - easily lasting 6 mo.
I'm using a brando ultraclear for K-Jam in my p3600... it works perfect... I haven't any sort of bubbles because i put it the first day i got my new device.. so device under it was very clean and the result is PERFECT
shoey5 said:
...you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
Click to expand...
Click to collapse
Completely agree!
I'm using Covertec Screenprotector(for S100), and it works like hell!
The screenprotector is about 1-1,5 mm thick, so it's pretty thick compared to many other brands, but the advantage is that it's almost impossible to get airbubbles, and the screenprotector is 110% clear! So you won't even see it's there!
Comes in a pack with two protectors, one with UV-filter, and one which is ultra-clear...
Can highly recomend them... No need for a "anti-bubble-wiper-thingy"
1.5mm thick?!?!?! That's thicker than a "anti-bubble-wiper-thingy". I have wetsuites that thick. You talking about a case or a screen protector?
LOL
No offense - just having fun. Some are actually quite thick in comparison.
Hehe! Well, ok; maybe it's a bit thinner... But it's about the thickness of a playing card, and just as stiff as one too...
And no, it's not a casing, or a wetsuit... Maybe a drysuit haha!
I use protector, but got 2 bubbles which I want to try to remove.
Can anyone tell me how to remove the protector without using anything thin and sharp?
Asbjørn
Tape. Take a 1-2 inch long piece of tape and press one end on a corner of the protector. Then pull
I can't get my screenprotector removed...not even with tape
Hate screen protectors. Don't use them. My nephew has a Jam which is years old and hasn't had a protector. NO screen scratches -- only a little dullness where the SIP keyboard is but that buffs out in seconds once a year using Displex. No scratches from keys even though it's subject to some abuse and the casing is scratched and dented. Thus I myself have no crap on my P3600's screen.
Im not a fan of cases or screen protectors, but I got 1 for my p3600. Its pretty good, I just wish it was about 2mm wider, since the left edge doesnt quite go till the very end of the screen which is annoying.
I got my screen protector from 'Javoedge.com' , it cost me about £8.50 but it is worth every penny.
It is cut to the exact size of the Trinity screen and fits really well. It is so thin that it slides beneath the White plastic case of my Trinity and the screen itself, so there are no edges of the screen protector to be seen.
I agree that you must take your time when installing it to try and get the edges straight, but when it's on it fits and looks great.
I opted for the super clear version and not the anti-glare version.
Great product!
Invisible shield from ShieldZone.com
I'm using an "Invisible Shield" from ShieldZone.com for my P3600. At the time I got mine, it didn't exist any pre-cut version for the P3600, so I ended up with a pre-cut TyTN shield, since they have the same screen size.
The first 2-3 days the result wasn't that good as I had some bubbles under the shield, but they disappeared after some days.
Watch the demo videos on ShieldZone.com, and I guess you will be as impressed as I'm with this shield.
-Bjørn
Hi people.
I am soon gonna be a happy owner of a Trinity and i will definately buy a screen protector for my device. Can you please give me your opinion on different brands you have tried?What brand would you recommend buying?
Thanks
I have a Brando one that they now market as a P3600 version.
It sticks to the screen with static so no glue or residue if you remove it. Also this means it is washable too. The static provides more than enough force to keep it on the screen. In fact it is stuck fast. Only by pulling a piece of tape stuck to it by both ends will remove it.
My only problem is more with screenprotectors in general. Since they add extra thickness to the screen they do affect the sensitivity of the touchscreen. So for a while you will write with the stylus and you wont be using enough force. You get used to it, but it would still be nicer to find a thinner membrane.
Mine is a Clear Touch Crystal from Boxwave. I've used Boxwave's products for years and found them to have very high durability and quality. The screen looks like it has nothing on it at all when the device is on. I find that it actually seems to improve touchscreen accuracy and feel.
The only problem I have had with screen protectors in general is that if they are cut too close to the borders of the screen, that is, if they fit too well, they seem to interfere with the screen's ability to detect taps. I think it is interfering with the digitizer. Every time I have installed a protector PERFECTLY leaving no gaps on any side, the screen stops responding until I remove the protector and reinstall it with the edges trimmed in about 1 mm on all sides. I don't think that you need to have all edges trimmed, but I do it for uniformity's sake.
Hope this helps someone who gets a protector and then thinks they broke their device by installing it like I did my first time.......ahhh to be young again.....
@olsenbjo
Does the Invisible Sheild cover the entire device, or just the screen?
Thanks!
Having recently bought my son a Nintendo DS, I noted that in the accessory pack I got with it, it came with 2 screen protectors that are semi-rigid. They're quite a bit thicker than one that shipped with my phone, and don't flex and bend like thin paper. They also don't seem to affect sensitivity of the touch screen in any way, as well as being perfectly sized to the screens and were invisible once fitted.
Are there similar protectors for the TyTn 2? I'd love such a protector as it'd be FAR easier to fit, and provide much better protection to the screen.
Rigid Screen Protectors
I have come across these. The ones I tried were made by "Martin Fields" product number MFOP-HTCTyTN-T
A right bloody bastard to fit as they are very slighty oversized. Perhaps this is done purposly so the protector fits into the gap around the edges of the screen?
Very clear and reasonably priced compared to the OEM product. They do work extremely well (once fitted).
Rgs,
J
Thanks. I'll check em out.
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
I just checked my little brother's DS box, hoping to find the screen protector but nothing there but manuals =(
Any reference on how firm and rigid the MField or InvS are?
Well, from the video, the invisibleShield isn't the slightest bit rigid, though if it lives up to its claims, that wouldn't matter. I ordered a Martin Fields one earlier so I'll see how good that is.
It's not just the rigidity for protection though. A rigid protector will be a LOT easier to fit...
Beleave me, MF is rigid. And yes, it is easy to install but remember to clean the surface of the screen. This part is very important. If you do it right, it will install in less than 30 seconds and you will struggle to see the difference between no protector and MF.
Oh I know that. I'll be cleaning it very carefully and making sure there's no dust about when I fit it! Don't want dust under the thing!
Just wish it'd hurry up and arrive!
boxwave
The boxwave protectors are much thicker than average ones, are washable, and work great. They are about as thick as the psp protectors, e.g. more like a hard plastic sheet, I'm not sure what the ds ones are like.
http://www.boxwave.com/products/cle...crystal-screen-protector-htc-tytn-ii_2905.htm
tke371 said:
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
Click to expand...
Click to collapse
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Semi- related: how are you guys cleaning your phone screens?
Oh, and +1 for Martin Fields.
My phone broke, but I had insurance on it (not from phone company but through homeowner's via a personal property rider), and mycellularrepair.com was able to replace the LCD for $200. Also, never buy that phone company insurance. Personal property rider is the way to go. It was just pennies a year for ~$500 of coverage for the phone. NO DEDUCTIBLE! So I paid nothing to have my phone fixed.
Get a NEW ONE - They're Cheap
jon_k said:
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Click to expand...
Click to collapse
Interesting - Are you really that concerned about a product which is relatively cheap compared to the amount of time use you get out of it? Forget washing it off. Just put another one on - a CLEAN NEW one. If they last a long time (like in most cases a year or more), who cares that you have to spend around $20 to get a replacement. If they stopped making them altogether or they cost a ridiculous amount of money (for plastic, ridiculous. For peace of mind, priceless), then yeah, I would wash and rewash the screen to save money.
And the idea is NOT to squeegee the WATER bubbles out to the sides. They will evaporate on their own given some time. The idea IS to squeegee the AIR bubbles out to the sides and also to take extra great care when doing this procedure. You wash it off so that it restores some of the tackiness on the film. You can get most of the water off by blowing or using a can of compressed air, THEN put it on. You shouldn't have that much water under your film if you take care when doing it.
I am sorry about your tilt. That really sucks. If I were you, I would just put a BRAND NEW one on next time and forget about washing it off.
~Gwen
I need one of these too, recently the digitizer for the touch screen on my phone cracked. They are charging me 50$ for the screen and 40$ for labor. My question would be, would this rigid screen have prevented my digitizer from breaking? If it would then id buy it in a second.
I'm giving a +1 to the Martin Fields as well.
I just got a couple of them for my phone. They're definitely more rigid than some of the others, but I put it on a clean screen & can barely tell I have one on.
Stylus slides smoothly across it, no visible scratching at all (unlike the OEM one that marked easily), & it's also pretty smooth for finger usage too.
Had to wait a week for them to ship via expansys-usa, but worth the wait.
Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...
If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.
I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.
I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.
needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.
Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.
Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.
I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App
I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.
I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.
To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App
I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!
Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.
tell us about fingerprint and screen clarity ...
naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...
Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.
I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!
Hi All,
There was some discussion when the S7A first came out about a kit that Samsung sells to replace the factory screen protector when it becomes nicked or scratched up.
Well, my time has come - I dropped my phone onto a metal bracket which chipped the protector up pretty good, so its time to replace.
Newegg seems to be the only ones carrying this protector -
https://www.newegg.com/Product/Product.aspx?Item=N82E16875868289&cm_re=s7_active_screen_protector-_-75-868-289-_-Product
Has anyone attempted to replace this - it looks pretty simple, but my biggest worry is getting dust between the two layers.
May take this to a pro to try and avoid the dust issue - not sure what I am going to do yet.
Chris
definitely keep us informed of what the outcome is ..
as there was and still is, lots of rumour, and nothing confirmed that this is even doable/real !
EDIT, just looking closer on the pictures, it shows cut out holes for proximity, and camera ...
and the original does NOT have these ! .. well i certainly cannot see any on mine ... ?
That looks like a normal everyday screen protector.
It sounds like you are wanting to replace the permanent glass that covers the display.
I will let you all know what it is - I ordered 2 and they should be here Tuesday or Wednesday of this upcoming week....
Chris
It exists!
The golden unicorn does exist! Check it out.
Chris
wahooo now thats interesting
also be interesting in how easy the old one comes off ! be nice to try get some pics of it coming off, and when fully off etc ...
and what its like underneath ! most of us have glass protectors over them !
so makes it a right proper screen material sandwich !! as standard original glass screen, then original film, then our glass protectors !!
hmmm great find )
The job is done.
I didn't take any pictures or video, because this needs to be a fast process (performed quickly) to avoid dust and dirt while you expose the screen layer to the environment.
Some tips:
a) Turn off any fans or AC before performing this project. Obviously, get in a area as clean as possible to do this.
b) The kit is pretty ingenious in its design. Basically the new 'layer' comes with some tape on one side of the protector - you line up the protector and then apply this tape to the SIDE of the phone. This HOLDS the layer in alignments so that you aren't messing around with it or getting your fingerprints on the layer
c) The instructions suggest removing the old layer first and then line up the protector, but I lined up the protector FIRST and then removed the old protective layer. That way the new one is ready to go, and you have less exposure to dust/dirt.
d) The tool that comes with the kit is great for removing the old layer, but follow the instructions and use it in the orientation described in the instructions (arrow down, arrow-side facing center of phone).
Maybe I just got lucky, but I didn't get any dust or debris when performing this job. I was quick about it as I knew longer exposure allows for dust to get in between.
All in all, for $20, if you have a scratched outer layer, this is your ticket to a brand new looking screen, provided you didn't pierce this protective layer during any type of accident.
Chris
Very cool. I was skeptical given that the newegg listing shows an s6 or s5 active!
I've removed mine and replaced it with glass and then a dbrand skin over that as another option for folks out there.
CFoote said:
The job is done.
I didn't take any pictures or video, because this needs to be a fast process (performed quickly) to avoid dust and dirt while you expose the screen layer to the environment.
Some tips:
a) Turn off any fans or AC before performing this project. Obviously, get in a area as clean as possible to do this.
b) The kit is pretty ingenious in its design. Basically the new 'layer' comes with some tape on one side of the protector - you line up the protector and then apply this tape to the SIDE of the phone. This HOLDS the layer in alignments so that you aren't messing around with it or getting your fingerprints on the layer
c) The instructions suggest removing the old layer first and then line up the protector, but I lined up the protector FIRST and then removed the old protective layer. That way the new one is ready to go, and you have less exposure to dust/dirt.
d) The tool that comes with the kit is great for removing the old layer, but follow the instructions and use it in the orientation described in the instructions (arrow down, arrow-side facing center of phone).
Maybe I just got lucky, but I didn't get any dust or debris when performing this job. I was quick about it as I knew longer exposure allows for dust to get in between.
All in all, for $20, if you have a scratched outer layer, this is your ticket to a brand new looking screen, provided you didn't pierce this protective layer during any type of accident.
Chris
Click to expand...
Click to collapse
CFoote said:
The golden unicorn does exist! Check it out.
Chris
Click to expand...
Click to collapse
How can i buy this, do you have a link of the product? Thanks so much
I was so excited about this as my S7 Active's screen is a mess. Unfortunately New Egg is out of stock and I can't find another source. There are some on eBay but I don't think they are quite the same. Anyone know of any other options?
So I peeled off the OEM screen protector with a guitar pick and replaced it with a glass protector from Amazon. It's working fine and looks a lot better than before. I'm not sure if this a good solution as far as breakage protection but it looks good and won't scratch so easily.
Yes, unfortunately Samsung has discontinued the OEM screen protector. Samsung is quick to discontinue parts to sell new phones unfortunately. A tempered glass replacement should definitely help as long as you purchase a quality one.
lalew25 said:
So I peeled off the OEM screen protector with a guitar pick and replaced it with a glass protector from Amazon. It's working fine and looks a lot better than before. I'm not sure if this a good solution as far as breakage protection but it looks good and won't scratch so easily.
Click to expand...
Click to collapse
Old post but was wondering how this was holding up for you. I had a ZAGG on my S7A when I first got it but my kid dropped it and the protector broke. Being my lazy self I didn't replace it not realizing how easily the poly carbonate cover gets scratched up. I thought about doing something like this but wasn't sure how it would last. I'm hoping to replace the phone within the next 6 months but all the surface scratches are driving me crazy.
Thanks for any help you can offer
It worked great for me. I traded the S7 edge off a couple weeks ago and it was still working great. I'm sure the screen isn't as shatter resistant with this solution but I couldn't tolerate the scratches. Any other questions just let me know.
Has anyone popped the screen to replace the battery? I've watched some You Tube videos how to get it off with a hair dryer or heat gun. They are a bit fuzzy on replacing the screen. Can the adhesive be replaced to keep it water resistant? Does anyone know more about this or have you done it before?
Hello,
Has anyone tried the Liquid Dispertion Tech Screen Protectors from Aliexpress?
I am wondering if they are worth it.
Link
Thank you
Jay
I ordered the FULL SIZE of that one about a week ago. https://www.aliexpress.com/item/2pcs-Full-Glue-UV-Liquid-Glass-for-Galaxy-Note-8-S9-Plus-S8-UV-Light-2pcs/32883790652.html?spm=a2g0s.9042311.0.0.1efd4c4dtTx93F
If you wanna wait until it arrives I can report once i get it and apply it hahah
Please write us a review after you recieve! I'm looking for a same solution but i didn't find any perfect for my S7 before...so i'm afraid i won't find perfect - what did not cover from the watchable screen...
babyboy3265 said:
I ordered the FULL SIZE of that one about a week ago. https://www.aliexpress.com/item/2pcs-Full-Glue-UV-Liquid-Glass-for-Galaxy-Note-8-S9-Plus-S8-UV-Light-2pcs/32883790652.html?spm=a2g0s.9042311.0.0.1efd4c4dtTx93F
If you wanna wait until it arrives I can report once i get it and apply it hahah
Click to expand...
Click to collapse
.:JiM:. said:
Please write us a review after you recieve! I'm looking for a same solution but i didn't find any perfect for my S7 before...so i'm afraid i won't find perfect - what did not cover from the watchable screen...
Click to expand...
Click to collapse
If you got the S7 Edge then this seller on ALi has the proper glass for your phone as well. In any case I have seen enough videos of how to apply this protector that I am now persuaded that this is indeed the ultimate screen protector for edge phones, the only thing that is to be found out, would be the quality of the glass it self.. AKA, oleopathic coating, strength and etc. These things are important as these days 90% of Chinese tempered glass has no oleopathic coating and is not even real tempered glass, it is just a cheap gimmic that breaks easy as F***. So hopefully since this whole UV glue is a next level kinda thing, the quality might still be on the high.
When mine arrives I will make a video of the installation and post it here for you guys with my comments.
i have S9 and S7.
ok, i will wait for it, thank you Mate!
babyboy3265 said:
If you got the S7 Edge then this seller on ALi has the proper glass for your phone as well. In any case I have seen enough videos of how to apply this protector that I am now persuaded that this is indeed the ultimate screen protector for edge phones, the only thing that is to be found out, would be the quality of the glass it self.. AKA, oleopathic coating, strength and etc. These things are important as these days 90% of Chinese tempered glass has no oleopathic coating and is not even real tempered glass, it is just a cheap gimmic that breaks easy as F***. So hopefully since this whole UV glue is a next level kinda thing, the quality might still be on the high.
When mine arrives I will make a video of the installation and post it here for you guys with my comments.
Click to expand...
Click to collapse
So the glass i ordered arrived yesterday. Photos below. On the 1st glance, the glass appears to be of rather good quality and it seems to have a real oleopathic coating against fingerprints, which is quite rare these days with Chinese tempered glass.
As promissed i will make a video of how i apply it and post it here.
babyboy3265 said:
So the glass i ordered arrived yesterday. Photos below. On the 1st glance, the glass appears to be of rather good quality and it seems to have a real oleopathic coating against fingerprints, which is quite rare these days with Chinese tempered glass.
As promissed i will make a video of how i apply it and post it here.
Click to expand...
Click to collapse
Very Nice! Thank you for the info.
Jay
I ordered this for my S9 plus. It worked very well. It doesn't come with an install kit to balance the dispersement of the liquid, so when I installed it I missed a small edge and I installed it a little to low on the phone so my case would move it. So I removed it.
However I would recommend this product as a good alternative to the more expensive model.
Ok so LONG post, but absolutely necessary to read if you consider using this type of screen protection. My glass arrived 2 days ago and I applied it today. It is crystal clear and the visibility is at its best, touch sensitivity has not been affected at all. It is pleasant to the touch and does not feel like crappy tempered glass. (pics attached)
I had promised that I will upload a video but I did not think it trough and on the 8th minute the memory on my backup camera finished, so without my realization it turned off.
Below however are a few notes that are important and I realized it while shaking above the phone and overcoming them
1. Make sure to put a dust sticker on the TOP speaker in case some glue decides to enter there..
2. Put dust stickers above the buttons, all of them, so in case some glue leaks out it will not go inside the buttons.
3. From the place i ordered on Aliexpress, the glue that arrived may have been about 10%- 15% more than necessary in the tube, so i got leaks on the sides of the phone once the glue spread all over, I cleaned it with a napkin, it is possible that it leaked as I may have mistakenly applied a slight pressure on the glass while I placed it. I recommend that once you release all the glue from the black non-transparent bottle, you can squeeze it and then suck up about 10 15% of the glue that is on top of your screen.
4. Make sure before you start the whole procedure, to turn your phone off.
5. Do it on a FLAT surface because the glue may start moving from the middle of the phone towards the sides.
6. If you order from the same seller I did, your lamp would likely have a pre-set timer, as mine apparently does. In this case, the lamp will turn off every 45 seconds approx, that signals that you should move it on the next area (Bottom, middle, top) of the screen.
7. I would recommend that once you place the glass on top of the glue and let it spread, DO NOT freak out if it leaks. Turn on the lamp, and move it on top of the screen from top to bottom for about 40 seconds so the glue hardens just a little. Then with a napkin gently absorb the leaked glue.
8. Make sure you see at least 5-6 videos of other guys doing it so you can be best prepared.
Overall, I think it is a good option for screen protection, much better than all the NON-FULL GLUE alternatives. Aka, protectors with glue only on the sides of the glass only and not in the middle. It is tricky to apply but once you are done you will be glad you went for it. I am not sure if it is any different than the more expensive versions others people are talking about, I suspect that it is plain re-branding. The more expensive ones just come with a different brand logo, better advertisement and more promises. But, same thing in reality. At least in my case, I paid about 15$ and got 2 glasses, 2 glues, and a good UV lamp.
Quick summary: Find a dust-free flat surface with good light, clean screen, apply stickers to speaker, and all holes and buttons, gently remove any additional dust particles from screen,apply glue to middle of screen, gently place glass on top and DO NOT apply pressure, if it is not too straight you can move it a bit, If any leaks, apply UV light for about 40 seconds up and down, gently clean leaks, apply UV light for 45 seconds for 3 more rounds. At the end you may even do one more 45 second round top to bottom as I did.
Enjoy.
EDIT: After applying it the whole thing, the glue may still remain slightly sticky on the corners, so that may allow extra dust to stick on it. However, If you can, leave the phone under the sun for 10 minutes, and the glue will dry to the full, then it would be easy do fully clean the corners with your nail or some non dusty cloth. Just do not put too much pressure with your nail as you may raise the glass and allow a bubble to form.
I have ordered the same today. lets see when I receive it.
@BABYBOY 3265
Is that compatible with mofi cases? I wanted to order it with one of their fabric type case.
fmaher said:
@BABYBOY 3265
Is that compatible with mofi cases? I wanted to order it with one of their fabric type case.
Click to expand...
Click to collapse
It should be... I don't see why not. The one i ordered covers most of the screen but leaves quite a bit out as you can see in the pics i posted... and that is considered not too case friendly. However to me it seems pretty compatible with all cases.
But, to be safe you can order the alternative case friendly version of the glass from the same seller. It is smaller and covers even less of the screen. I don't see the harm in getting one and trying it
Received mine today. Took 12 days to reach India. The screen guard is really good,fits perfectly. the glue is little excess so had to clean up a lot. note for next time. However I fixed the glass a little to the lower side so bundled case is almost touching the glass. Don't know in future if it will lift because of that. Overall a fantastic deal.
Hello
I received mine yesterday it took about 13 days to get to the EU, and applied it today.
The application when well on the first try,i did watch quite a few tutorials beforehand and that helped alot.
The screen protector is very clear , and you do not notice it at all, it also seems to have some real oleophobic coating.
Tactile responsiveness is on par with what you would get without a screen protector.
All in all a very good alternative to the more expensive competitor you also get two screen protectors and two tubes of glue for the same price.
If you are in the market for a screen protector dont hesitate.
Jay
Just ordered, thanks for the review & tips..
Another positive report here, although I wish I'd been a bit more careful as I have a couple of tiny bubbles near the edge. They only show up on a bright white screen so I may live with them rather than try again with the spare glass & glue.
jsanta11 said:
Just ordered, thanks for the review & tips..
Click to expand...
Click to collapse
You wont be disapointed.
watch some videos before applying it, that really helps.
Check out this one for example.
( not affiliated in any way but i found it really helpful.)
Good Luck
j1978 said:
You wont be disapointed.
watch some videos before applying it, that really helps.
Check out this one for example.
( not affiliated in any way but i found it really helpful.)
Good Luck
Click to expand...
Click to collapse
Thank you very much!!!
I have the whitestone and love it. Was wanting something for a backup though. Last time I waited a week to get my warrenty replacement.
Does the AliExpress come with a tray to line up the glass? Or does the glass work with the Whitestone tray? If not, how do you get your glass lined up?
todd3835 said:
I have the whitestone and love it. Was wanting something for a backup though. Last time I waited a week to get my warrenty replacement.
Does the AliExpress come with a tray to line up the glass? Or does the glass work with the Whitestone tray? If not, how do you get your glass lined up?
Click to expand...
Click to collapse
The tray you are talking about probably will work. However the standard way to align the glass is by your finger and vision. Just make sure that if you do so, do not press downwards while you are moving and aligning the glass. If you press down, it will push some of the glue out...