Related
:roll:
Hi I have a big problem and i need all the help i can get
I have an XDA IIi but i accidently deleted all the data on it
the opertating system is gone the screen is only showing me Serial 1.0
and when i connect to my pc only shows USB 2.0
I would like to know if somebody can help me out with this and tell me how to restore the software to my device, i have a backup copy on my SD card, but i don't know how to used
Please help me
thanks
[/b]
have to reflash it
how did it happen?
did you try puting any rom version in it or what?
more info is needed
hey
I was trying to upgrade the radio version of the phone, but the version i was installing was not desgined for the XDAIIi , so, instead of upgrading, it deleted of the rom of the device and now the operating system is gone
the only thing i still have is the backup copy that i made defore the upgrade
i don't know if there is a way to use that backup copy in order to restore the system
thanks
Recommendation
It is propably that the system ROM was erased during upgrade and the upgrade wasn't successfull. Try to download the Diamond 1.2 WM2003se(my recommendation) ROM images package(somewhere available at this forums(Himalaya Upgrade)) and aferwards to flash your device with these files. If u want,u can try also the WM05 system.
He said his device is an Xda IIi not the old II.. Well you can reinstall back ur old ROM, no worries.. Download from my-xda.com..
i or not i
I thing there's no matter if is it IIi or simple II. Or not?
How do I fash my device in order to install diamond 1.2?
I also was looking an upgrade for the XDA IIi but now there are not offering any updates, I have tried to install the upgrades for the XDAII but it gives me an errror telling me that the ROM version is different and it cannot be installed
...
If you mean the Country ID Error while attempting to flash the WM05 system,there's a problem of this OS. 2003se is without problem(for me). Simply download the Diamond ROM from this topic:
http://forum.xda-developers.com/viewtopic.php?t=18287
or directly:
http://forum.xda-developers.com/download.php?id=3739
This contains 4 files(maybe more,but these are important).
-HimaUpgradeUt.exe
-ms_.nbf (Extended ROM image)
-nk.nbf (System Image)
-Radio_.nbf (Radio stack)
Start the bootloader(probably you are there),put the Hima to cradle,Windows at your computer detects your device and then extract the downloaded file into one folder and run HimaUpgradeUt.exe
This utility is writing what you should do.
As I have readed that the WM05 OS is a little bit buggy(some compatibility problems etc..) at this time to use in Hima. Therefore I am using the 2003se.
Thanks a lot!
Hey guys,
I just downloaded the XDA IIi ROM version from the O2 website
My device is back to normal. I coudn't do it without all of you guys.
Thanks a lot specially to you jamil_mhmd for providing me the address
Sincerely
Jorge :wink:
You're welcome
Nice to help you.
Re: i or not i
TomasNM said:
I thing there's no matter if is it IIi or simple II. Or not?
Click to expand...
Click to collapse
Of course it does matter.. Remember that the II and IIi is now a really different device even though both looks identical.. For example, u said he can upgrade to WM2005 (or ROMs that was meant only for Xda II), but of course this can't be done, this is bcos the difference in hardware specs, 4 example IIi has 1.3 MP cam (II = 0.3MP), 128MB RAM, 128MB ROM (II=128MB RAM, 64MB ROM) and so on..
JorgeGZC, I'm glad to be of help to you.. :wink:
Oh sorry.
I didn't know. I'll be well advised.
İ am a mda2 user. İve bought my device from Germany and after that i changed its ROM to an english one using a rom editor to change its country id .. This encouredged a close friend of mine and he bought a O2 XDA2i. And since both me and my friend have no idea about German language we immediately tried to convert it to an english ROM.
And using a wrong ROM (sinmerged 2003 se for himalaya) i killed his machine. It now only writes serial or usb (when connected to cradle). Someone told us that if we flash it with a original German ROM it can work again. But there is no German ROM downloadable . And even if we find a German Rom and install it , it wont solve our language problem. I am a dentist and i even cannot believe how much i've learned browsing these forums
If you can help me i will be very happy!
note : in the ftp server there is rom named german rom for xda2i.. But its a lie. its in english
The same?
That looks like the same problem as at the top of this topic. Just read all this posts once again and you'll get the right way to solve your problem. Hope that helps.
I also have the same problem. I tried to install the wrong upgrade. I've downloaded the new one but i keep getting a connection problem message because activesync can't find the XDA. Help please!!!!
...
When you are in bootloader then ActiveSync will not find the device to synchronise with(cause the WMOS is not running and therefore is any synchronisation disabled). When you put into the cradle,the computer should find new device(Microsoft USB Sync). Then is the device connected and ready to update.
Goodmorning,
I have one MDA VARIO (UK), where can I find the I-mate K-jam ROM Freeware (English Version)?
And it’s very difficult to install this ROM in my MDA VARIO? (I will must first Back Up my old ROM), how becomes this?
I hope to help me...
Thanks
Hello molf48,
In the ftp there is the rom you want (K-JAM_WWE_1010903_106_10110_ship.exe).
For the other questions, i'm sorry i don't know the answer/s.
I hope some1 guru will help.
you don't need to backup your rom unless you plan to revert back to the original rom in the future. This might or might not be needed in case of a problem with your phone and asking for a repair during the warranty period.
The steps you need to take are:
a. READ THIS FORUM and also the WIZARD UPGRADE forum - take 1 hour of your time and read read read... many people have upgraded.
b. Unlock the Vario and also the CID - using the Lokiwiz utility - read before you unlock - read a lot until you understand what to do.
c. Donwload an I-Mate rom and simply install it by double clicking on it... however like always - READ READ READ
Thank you for your questions and for your time,
Where I can find this ROM? I will go to Google and put the FTP (K-JAM_WWE_1010903_106_10110_ship.exe)?
But can you tell after me with simple steps how flash the new K-JAM ROM in my MDA VARIO?
It’s my first PPC and I don’t know how?
Thanks you
I will answer you even though it is clear that you are not reading the forum.
Once you have unlocked your device using the lokiwiz - upgrading is very simple - you just activesync your device (connect it via usb to your computer - while microsoft active sync software is running - make sure you have the latest one), make sure you have enough battery in your device (it;s best to have 90% or more left) and then simply run the I-Mate upgrade file. And... wait ... and follow the instrucitons on screen.
If my explanation is not clear enough then I suggest you read. It's not fair to help people that just simply won't read. I can assure you that all of what I have said above is written in a much clearer way in the fourms.
Good luck and READ.
finding it hard to get good answers....so in anybodies opinion
the 02 xda mini s
is there any updates from the origonal 1.5.4.2 WWE? if so where can i get em from?
If no updates, maybe the 02 rom isnt the most up-to-date?? and it would be better to change to i-mate? or a q-tec?...if so...which would people recommend? and where could i find them? also...would they effect my being on 02 at all or would evrything stay the same and just the device will work better?!?
what do people think?
jamie
Hello jamie,
I would think that you should at least upgrade to the qtek9100 rom if u worry that u might not turn back to the O2 provided ROM. Or if you want even better performance, you can use the latest imate ROM. But i read in posts that you cannot downgrade as the loki wizard does not work in this rom.
Anyhow, i'm using an xda mini S and using the imate rom though.
Cheers
I was wondering about this as well. I've got an O2 XDA Mini S and it all seems to be working fine (so far). I don't use it for anything spectacular though phone, diary, notebook and I have a few other apps on it. I also run spb pocket plus and spb diary, again with no particular problems.
I know the old adage, "if it ain't broke, don't fix it", but are there any benefits from moving to the latest imate ROM, say?
tzehming,
You said you couldn't downgrade. Do you mean that once you put the latest imate ROM on, you can't ever go back to the original O2? Also, what's the deal with LokiWizard - is there something that needs to be done before the ROM can be upgraded?
(apologies for the dumb questions, I'm starting to get to know my way around the device)
Thanks,
John
jko said:
I was wondering about this as well. I've got an O2 XDA Mini S and it all seems to be working fine (so far). I don't use it for anything spectacular though phone, diary, notebook and I have a few other apps on it. I also run spb pocket plus and spb diary, again with no particular problems.
I know the old adage, "if it ain't broke, don't fix it", but are there any benefits from moving to the latest imate ROM, say?
tzehming,
You said you couldn't downgrade. Do you mean that once you put the latest imate ROM on, you can't ever go back to the original O2? Also, what's the deal with LokiWizard - is there something that needs to be done before the ROM can be upgraded?
(apologies for the dumb questions, I'm starting to get to know my way around the device)
Thanks,
John
Click to expand...
Click to collapse
Hello jko,
Yup u're right about having to use loki to unlock the rom. Search it in the forum and u'll find it. Just type loki.
After unlocking using the software, you can then install any rom for wizards, i.e. O2 mini xda s rom, imate rom or qtek 9100 rom. The one i'm using now is the latest one, which is the imate rom. I heard it cant be downgraded and we'll have to wait for an updated loki software to fix that. But the qtek 9100 rom can be downgraded again. I suggest u try the qtek rom as it makes the pda much faster. The O2 rom is really a turtle when opening the slider and closing it.
Hope this helps
Having read the advice above I'm going to unlock my device and flash it with the qtek 9100 ROM.
Once I've done that, what CAB files do I need to install in order to get O2 MMS and O2 GPRS working again?
Thanks,
Having read the advice above I'm going to unlock my device and flash it with the qtek 9100 ROM.
Once I've done that, what CAB files do I need to install in order to get O2 MMS and O2 GPRS working again?
Thanks,
Can't answer your question, but just a request to post back your experience once you're done. It would be appreciated.
John
well, you could again search the forum for gprs settings. u may not get the automatic setup anymore, thereby may have to do it manually. search for O2 gprs in the forum. as for mms settings, someone made a cab file, I can't remember which forum , but again, it can be searched. Try O2 mms.
hope this helps
I've got the mini S too...
First thing I did when I got it was to get rid of all the o2 crap on it... couldn't believe how slow it was even in basic mode!
I did the whole hard reset then soft reset when it says "customizing..."
This basically leaves you with a bare o2 wm5 rom without any of the customiztion installed. MMS won't work and either will GPRS.
To get these working you need to install Total Commander on your mini S and browse to the /extended_rom/ directory.
The cab files in this directory are the files installed when it says "customizing..." on a hard reset.
You can then selectively install which ones you would like to install.
There is a brief outline of what each one is on the htc wizard page on the wiki but I've made a better one I'm gonna stick on there.
You also need to input the GPRS settings and MMS settings manually and install a cab from the extended rom that creates the MMS folder in the messaging application.
After you've done all this you'll notice a considerable improvement over the o2 rom with all the crapola installed.
I've also used lokiwizard to unlock it all.
Not tried the qtek rom or the new i-mate one... as I don't use push-email or the like and haven't found any considerable bugs yet I don't need to.
I have found naggaly features which after installing the RegistryWizard, NullKbd and a few others... they seemed to be solved!
I recently updated my O2 mini S 1.5.4.... rom to the new imate one and i must give my approval for upgrading to this rom. Its faster, more stable, is much better on battery life for some reason.
I recently updated my O2 mini S 1.5.4.... rom to the new iMate one
Click to expand...
Click to collapse
Where can I get this. It does not appear to be in the Rom download area (or is it under a different name?)
its in this thread http://forum.xda-developers.com/viewtopic.php?t=42638&postdays=0&postorder=asc&start=0
Well I successfully upgraded to the new i-mate ROM and it's MUCH faster. There's a lot less lag when sliding the keyboard in & out, and the general responsiveness of the device is considerably better.
I've managed to get GPRS working, and I've installed the MMS cab but I can't send or receive MMS's at the moment - it keeps telling me that it couldn't send the message. So I'm going to post elsewhere in this forum and check that I've got the correct MMS settings.
Overall though, I'd definately recommend upgrading to this ROM. Just remember to use Total Commander to take a backup of the O2 Extended ROM beforehand so that you've got the MMS cab-file available to install at a later date.
Excellent. Thanks for the feedback. I may well give it a go later today.
John
Code:
Just remember to use Total Commander to take a backup
Is this the one from Ghisler.com?
I downloaded this but cannot find any instructions or reference to backing up the Rom. Any idea where I can get the instructions (if there are any).
Code:
browse to the /extended_rom/ directory
I cannot see this in the Total Commander Directory list.
Any suggestions appreciated.
Just got my o2 mini s a couple of days ago and I am loving it soo far!!
However, I already encountered a couple of bugs - the system laggss REALLLI bad, like when the slider is pushed out, even when closing/running certain programs the device hangs. Also, I have seen a couple of times where the "phone" application will not load up. In all these cases I have had to do a soft reset on the device.
I am thinking of upgrading the rom - but this is my first pda, and i know nothing at all about fidgeting with the software. I don't want to mess up such an expensive phone so is it pretty easy to do?
w_2k20a:
I too want to be careful.
I have 2 phones, and my O2 Mini S is slow compared to my MDA Vario.
So I am going to try and run an update to replace the ROM on the O2 with the newer one on the Vario, and also get rid of the O2 add-ins which are what slow it down apparently.
I will try this first because I have read about so many problems with the latest I-mate one, and it is not easy to return to the original ROM if it does give problems (although it is possible it seems tricky) - I may the Imate one later if I need to.
The ROM for the Vario (along with others) is here:
ftp://[email protected]/Wizard/Roms/Tmobile/ - use password xda
Its the UK one.
But first I backed up my Mini ROM. I used awizard to do this. Read this thread:
http://forum.xda-developers.com/viewtopic.php?t=43399
I think that you will find that using the awizard (get it from this link)
http://forum.xda-developers.com/viewtopic.php?t=37386&postdays=0&postorder=asc&start=0
the backup part is easy. I have done that quite successfully.
Good Luck.
Hello.
I want to change/upgrade my ROM to WM6. But I want to make a Backup of my existing from first (maybe I'm to stupid to do the Update) and to have the chance to get my MDA Vario back to life I want to make a backup of the ROM is installed at this time.
Could somebody maybe tell me how i can backup my ROM? And... How can I reinstall the ROM? I think it will be moved to the SD Card?
Thanks a lot.
You might want to try this then first:
http://forum.xda-developers.com/showthread.php?t=305294
Thanks for this.
May problem is that I have a "very" new ROM installed (T-Mobile MDA Vario 2.21.2.8 GER). and I'm unable to complete the the CID unlock process (the Netlock is removed allready with the lokiwiz 3a.).
If I'm entering the Bootloader and open mtty I'm .not able to open the USB port.
Does it mean I need to downgrade?
Thanks Maik
There is a newer public T-Mobile ROM on the T-Mobile website: Version 2.26.2
You need to downgrade your ROM to custom 1.05 (check the WIKI page) in order to run lokwiz CID unlocker!
I tried the version 3 of lokwiz but the only one which worked properly on my MDA was the version .2b
How ever,
the CID lock should not effect the MTTY utility. This is an official HTC procedure and should work on any WIZ.
UPDATE:
I just saw that you're talking about a german ROM? The latest public german ROM is 3.3.8 (check the german T-Mobile site for that!). If you want to keep the older 2.21 you can find it at the Austrian T-Mobile site again after downgrading and unlocking your CID
I am running the german rom AKU3.3 myself - it is much nicier than previous versions and has already some WM6 features integrated.
Ok. So I need to downgrade my Device. to do the CID unlock.
Maybe the system firewall and some other settings are affecting the MTTY issue.
I checked the T-Mobile website for the newer German ROM version.
If I check https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm (what my Device is) I only see the 2.21 version and NO newer version?
1.
Go to www.t-mobile.de
2.
Click on top on the menu "HILFE & FAQ"
3.
Select on that site "Broschüren & Software"
4.
Now click on the left site menu on "T-Mobile Software"
5.
It takes you to a new page and asks you for your MDA. Don't worry if your PDA is not in the list! Just choose any PDA. It will take you to a new page and show you the selected PDA. Right underneath you will see a link: "Model aendern" - click on that link and then chose as Manufacturer T-Mobile and you will find the MDA VARIO!
Sorry for being so complicate but the T-Mobile site is set up with Flash, so, you can't just copy the link! You always have to go the loooong way! Be aware that you have to temporarely allow popup's ... !
How ever,
I will try to paste the link here to the direct download and I hope it works:
http://www.t-mobile.de/downloads/t-mobile/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
Hey the link works....
Thanks. I find out that my Device is a G4 device and I also see that I can't unCID this device... Right?
I'm a little bit in fear that something is going wrong during the Update to WM6 and I have no working Backup on my SD card.
Ok. So this steps I will do. Maybe you can currect me if I'm wrong.
1. I will perform a downgrade to the custom rom 1.05 and then I make a backup after running CID unlock.
2. I make a Backup with the MTTY
3. I will install the WM6
4. If not working I can backup from SD card and maybe install the newest ROM
You only should downgrade for CID unlocking your device! This is required for installing other ROMs than from your cell phone provider!
If you want to upgrade to the new german AKU3.3 from T-Mobile - that should work without CID unlock! You also should be able to downgrade to your existing ROM version in case you just dislike the new AKU3.3
BTW:
If you're planning to upgrade to a selfmade WM6 which you can find all over the web: I tried almost all of them! None was as stabile and good as the german T-Mobile AKU3.3! Sure, they look cute with their VISTA-style look but the functionality is far away from being perfect! Also: Lots of the ROMs are very user-personalized and contain no configuration for your network (such as GPRS and MMS) - my advice: stick to your provider ROMs, either AKU2 (which you're currently running) or the newer AKU3.3 from the link above - at least until you learnt flashing and registry hacking on your device!
WOW I allready can hack the Registry but having sometimes some issues with instructions here . Like I say before... I'm a little bit in fear...
Well, it is understandable! Noone wants to end up with a brick!
There is always a risk in flashing devices! I do it since years now and was unlucky only once by flashing a SIM locked ROM to a Motorola phone. Haven't had any problems since then. The best thing is READING and if you can't find answers just post your question. Next to it is always helpful to check also other Forums or try to find guides in your own mother tongue!
Hacking the registry is not really riskfully - at leat the only one thing what can happen is that your device won't start up and you might lose your files and data. Other than that you should be able in any case to get it running with a hard reset again by holding CON button and Voice Dial button at the same time and press Reset.
Flashing can destroy the device because of it actually erases everything in the device; even the ROM before it writes the new one. But even here you will be able to enter in BOOTLOADER mode in most cases.
Yeah thats right Junner. Reading and asking... Since I flashed my SDA wrong I'm happy to have a Backup on the SD card to get the Image back. If this is the case I'm happy.
I installed AKU 3.3 and it's looking good and working fine.
Maybe I will downgrade to the custom 1.05 and do a backup. I only want to look how the WM6 is looking.
Are you German? Or german speeking?
The ROM backup to SD card via MTTY should work without CID unlocking your device! There is no need to downgrade for that purpose. I had hard times by doing it too. It took me several trials until it worked finally!
The downgrade is only necessary if you're planning to install ROMs from other providers or ROMs in other languages. I asume you're german, so, if you don't believe anything I say - this you can believe: the german AKU3.3 is the best out there you can find for the WIZ
Like I mentioned earlier: all the WM6 ROMs you will find all over the web are user created! They are either taken off from other devices and changed around until they worked on the WIZ or just visual pepped up AKU3.3 ROMs (the one you installed now). Allthough, I did not find any WM6 out ther which did not have issues in one way or another ...
I speak a little bit german , yeah!
We have WURSTFEST here once a year with lots of Sauerkraut and beer ...
Mates, if I read my rom am i going to be able to copy it to pc and Dump it with a ROM Kitchen?
I got my Vodafone1605 with wm5 installed. Do I lose my warranty(I bought it from Vodafone) if I apply official HTC WM6 upgrade for Hermes?
in a word, no.
Few things you should do first tho.
First off, if you want to use your phone with other network sim cards try unlocking it.
http://forum.xda-developers.com/showthread.php?t=293665
Dont CID unlock though, cos that will remove your warranty. Basicly follow the install procedure, but when it asks what you want to do just tick network unlock.
Then you should install Hard SPL v7
http://forum.xda-developers.com/showthread.php?t=296722
Its a very very simple install that will not screw your warranty, but will allow you to install any rom, be it official or a cooked one and will make it much less likely to brick your phone.
You will probably get bored off the official rom really quickly, so its worth looking at a cooked rom, they offer better features, run faster, take up less room and look a lot better.
Heres two I would recommend.
http://forum.xda-developers.com/showthread.php?t=349338
http://forum.xda-developers.com/showthread.php?t=359458
and keep an eye on this, looks gooood
http://forum.xda-developers.com/showthread.php?t=363782
One thing you should remember, there is always a risk of ****ing up your phone when upgrading the rom, radio or anything. Hard SPL removes 99.99% of that risk, but there is still always a chance. But there is guides here of what do if anything happens.
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Any other questions have a search on the forum, if you cant find anything ask, someone should help.
Hi,
There are no official software up dates for the V1605 available from Vodafone. If you do decide to change the software to something that isn't supported by Vodafone you will in fact invalidate the warranty.
We have explained this in more detail here.
Techgirl
Vodafone UK
Funny how my device was replaced under warranty after id flashed it a dozen times, I just installed the original rom again and now one said a thing.
does the hard spl backup the original rom?
no, hardspl allows you install different roms. If you want to revert to the original rom you can. Its on this site.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Its one of the two english vodafone ones....
I found a CD in the phone package and there are windows mobile 5 geniune stickers and eula and stuff like that, can the original rom be there?
Not likely.
so where can I get the original ROM? It's czech vodafone rom
Czech rom doesnt seem to be on this site, it will be around somewhere tho.
I just managed to get the original rom. So, if I flash now, are you absolutely sure that after the "flash the original rom back" thing they won't recognize anything at the repair service?
PLS, quick reply, I'm deciding whether to get a cashback for the SDHC or to keep it
AVN37 said:
And if I copy THE WHOLE content of the memory card to my HDD, flash some wm6 rom, will it be recognized if I just put those old files back? It won't be like the original, will it?
Click to expand...
Click to collapse
The contents of your memory card will still be threr after you flash a newer ROM to the device, the memory card isnt changed at all.
I would recommend you take some time to read through the WIKI PAGES on the hermes before continuing with any upgrades.