I'm at my wits end. Can anyone help!
My bootloader is stuck at
VOGU100
SPL-0.36.0000
CPLD-3
I have a 6900 on Verizon. I was attempting to get gps settings to work and attempting to load coke .40 when it got stuck here. I tried running custom/stock roms but when I run the bootloader program (from the dos window) it says "No Device Connected".
When I try to run it from the .exe program I get a 262 error and I've read the readme.doc but the recovery options don't work.
When I try running the VOGUIMG.nbh file from the sd card it says "no image file" and won't run.
I've spent hours trying to figure this out. If you can offer any advice I'd really appreciate it.
you have to rename the nbh file to whatever your provider used for the stock.
Related
I blew my bootloader some how and spent some time modifying the pnewbootloader source code to make it work for WM2003 ROM version 4.01.16
I took original source code by itsme and added version and address information for ROM 4.01.16
Use this in conjunction with a valid 5.15 bootloader image to downgrade your bootloader imaget to 5.15 from 6.22 or 5.22 or 5.17
type pnewbootloader_40116.exe bootloader_v5_15.nb0
to apply the bootloader.
FLASH AT YOUR OWN RISK. This program uses defined ROM addresses and will only work with known ROM versions. There are some basic checks to prevent damage.
Fixbootloader don't work
I have T-Mobile ROM 4.01.16 with bootloader 5.15 probably locket by this T-Mobile ROM (I can't flash any other ROM and original pnewbootloader whrite message "Unable to find flash info offset, cannor disable bootloader writeprotect")
When I trying to start you updated pnewbootloader, my WinXP popup a message
"The application failed to inicialize properly (0xc0000135). Click OK to terminate the apllication"
What should it be?.. :?:
This application needs ActiveSync and also the "itsutils.dll" to be located in the same folder as teh EXE.
Which version of XP are you using. I built it on a XP pro SP1 box.
I have exactly the same: WinXP Pro SP1
I run in cmd "pnewbootloader_40116.exe bl515.nb0"
from the folder, which contain
pnewbootloader_40116.exe
pnewbootloader.exe
itsutils.dll
pput.exe
bl515.nb0
Activesync 3.71 i connected to my XDA.
Cant really say why you are having this problem. But one this might help.
Seems like your .net framework is either old or not working.
Go to windows update to download and install the 1.1 .net framework or visit
http://www.microsoft.com/downloads/...e3-f589-4842-8157-034d1e7cf3a3&DisplayLang=en
Thank you for your help! The problem was realy in .NET version.
I had 1.0 installed on my WinXP.
After updating to .NET 1.1 your program is working fine. And it seems, that it updated my bootloader. Its output was
pnewbootloader.exe bl515.nb0
in FindFlashOffset (or somthing like this)
protection found at 8c0d62c8
result: 00000000 00000000
After that my device is still bootable and boot my 4.01.16
But I still can't update my ROM to 3.17.03 through XDATools..
Can anyone help me? plzzzz!
are you using xdarit to write your image to SD card ?.
You have to use SD card flash method to upgrade/downgrade the ROM.
Download XDarit and use that to write the image (.nb1) to SD card in 1k header format.
Then reset and boot your pda after holding the power button. You will see a menu which will let you flash your PDA with the image on the SD. Search for xdarit on the forum. You will find SD card flash process also.
rchir, when you said I blew my bootloader some how , did you mean you get GSM error?
Thanks
No,
I was unable to get into the bootloader anymore. I trid to build a boot loader upload SD card and it wiped out the boot loader from my PPC.
GSM error might be due to you Radio firmware failure.
Thanks, well, if you could figure out how to solve the Radio firmware failure, please post it, I'm sure many people here would apreciate it :lol:
would this fix my broken bootloader?my unit doesn't display anything on it's screen, I think I've already erased my bootloader pls help me, I'm so desperate about this.... i tried everything which inside this thread but my activesync can't detect my unit...SOS
I also have a broken bootloader ...
I have an xdaII, and I've somehow overwritten the original bootloader v1.06 with a corrupt bootloader image. Now my xdaII is completely dead. No leds flashing, no screen, no button response. All I get is a flashing red led when i rty to charge my xdaII without the battery. It seems I can't access my bootloader anymore. Plz help !! If you know any method to access the boot loader agin it be a great help. Thanks.
sorry guys, it has been a long time since i sold my XDA, but i think pnewbootloader will only work if you are able to connect your pda to PC with activesync.
So you should have a working XDA, with a broken bootloader to get it fixed. Seems like in your case, Both the ROM and Bootloader are corrupt. I am not sure about any process which will fix both at the same time.
can u post the download again? or pls send it to me [email protected].. THANK YOU..
(the download feature does not work, here in my computer, and another another computer appears a error message)
Hai
I have PWA1 work in wce 2003 GR 4.01.12 not work bootloder can't dispay because i wrong flash my bootloader himalaya ver. 1.29. plzz help my to change my bootloader 6-22 0r 5.15. please.
Hello, please can you help me! I only had my PDA repaired a couple of days ago, i needed to unlock it and i used your intructions for unlocking the XDA II but it did not work.
After following your instructions and opening the program xda2unlock and typing "yes" the program came up with the message:
"ERROR: OpenComport \\.\WCEUSBSH001 - the system cannot find the file specified"
The PDA is showing "serial v1.06" and "usb v1.06 when in cradle, it wont do anything like before i had to get it "reflashed" by the company.
What can i do??
Thank you!!
Nieko
connect it to usb and falsh a rom on it
the wifi and the readme of the rom file describe step by step how you do it
Struck on Serial
I do have the same problem. What would be the best ROM plz. All the ROMs I downloaded gives error as "102 Image File Checksum Error" or Language ID Error". Pls give me a good link for a working ROM.
hello guys, I have this problem: I'm using ROM manilla 2D from Josh, but it's very slow, it takes about 5min to boot and start. Second problem is the anouncement in start screen: No GSM. I know, radio rom is missing. But when I tried to upgrade radio or other ROM via pc, it's saing: error 262 or 260. I tried it with windows installers, with RUU, with device in bootloader mode, but no efect. When I'm flashing via SD card, it says numerical error (few numbers in red) can somebody help me to fix it? Thx
and when I'm trying to update it via USB in bootloader mode, it begins good, but about 2% it says: Error 270 - Image file is corrupted. Help pls
T-Mobile Dash 3g WM6.5 SPL1.26
First I wanted to downgrade to SPL 1.17 WM 6.1 to try and upgrade/unlock it to put some ookba ROMs on. I used "RUU_Captain_TMOUS_1.17.531.5_refry" and half way through the process it gave me "Error 226 Flash Write" and bricked the device.
After getting bricked I logged onto Tmobile and got the update, Unbricked the device and then it booted and said it has no memory to install windows. The phone goes to the home screen and gives me an error that I cannot get rid of "Error: Install \Windows\accessibcpl.CAB failed, code=0x80070005"
Plugging the USB cable in, my computer tells me that this device has 0mb of 16mb free. This sometimes happens to USB devices if they are unplugged during a data transfer. Do any tools exist that can rebuild TFAT or am I just SOL on this phone?
I appreciate any responses,
Thanks,
Preston
Is there any drivers available that will make this phone read as a USB/HDD so my computer can make it, it's ......?
Is there any way that I can end process on the ERROR message so that I can use this phone as a basic phone?
Hello all,
After trying much with AAHK and read many many posts I still unfortunalty cannot find the right answer.
I'll explain the situation.
I have a DHD from Vodafone NL (with is the UK ROM) version 3.13.161.3 and wanted to root (for ICS).
I'vew downloaded the newest AAHK and linked the phone. So far so good.
When running the AAHK it wanted to downgrade (abvious, no problem). The it downloaded the PD98IMG-GB4.zip.
Put it on my SD card and rebooted. Then I got the revocery image with the red triangle... So, choose option 2 to try something else.
Finally it booted in HBoot, it read the image and wanted to convert to that. But, mu volume + is broken, so i cannot confirm this
So, i've tried the other suggestion of downloading a stock RRU with the right version.
This want to upload the rom, but it stall is the 'sending'mode. If i look in the RUU log it 'hangs' on the command
'fastboot -s <deviceid> flash zip <pathtozip>,rom.zip. I waited for 1 hour, then killed it. On the screen of the phone you should see a progress
bar, but on my screne only the HTC logo, nothing else
I also tried replacing the rom.zip just before sending with the .zip downloaded by aahk.
Then even tried flashing myserf with HBoot in 'fastboot USB'mode, but if keeps giving 'flashing error' or something.
My radio is still S-on, so that might be a problem??
I even tried with the HTCDev method, got a RUU from there, but even that hangs on the fastboot command.
So it seems i'm stuck....
Anyone else has a export advice for a novice like me?
Thanks,
Rene
try putting the PD98IMG-GB4.zip file you have in the PD98IMG directory in aahk, when you run the aahk script it will check that directory when it prompts for a downgrade. if it finds the correct file, it will try to use that. if not, it will download.
azrael97c said:
try putting the PD98IMG-GB4.zip file you have in the PD98IMG directory in aahk, when you run the aahk script it will check that directory when it prompts for a downgrade. if it finds the correct file, it will try to use that. if not, it will download.
Click to expand...
Click to collapse
The PD98IMG-GB4.zip in that dir was downloaded by AAHK, so it can find it and it does.
It even put it om my SD card, after which i was stuck because the volume + button doesn't work...
But thanks anyway.
Put it on my SD card and rebooted. Then I got the revocery image with the red triangle... So, choose option 2 to try something else.
Finally it booted in HBoot, it read the image and wanted to convert to that. But, mu volume + is broken, so i cannot confirm this
Click to expand...
Click to collapse
What's option 2?
I guess you didn't finish this part of the aahk script properly since your volume button is broke:
echo.
echo Starting stock recovery the first time to init....
echo.
echo Steps:
echo 1. When you see the ugly red triangle, push/hold vol-UP and then push power to start stock recovery.
echo 2. When you get to the blue stock recovery menu, choose reboot and push power.
echo.
Click to expand...
Click to collapse
When I was messing with somebody else's DHD I did try manually flashing the PD98IMG.ZIP that aahk downloaded and i always get a bad image error or something. Only when I did as instructed by the aahk script was I able to root the DHD successfully.
I meant the menu option. But that is from your list: I got 1: The ugly red triangle.
However, i cannot try the vomule up and push power, since that button is broken
I just tried a reflash of HBoot with option S, menu entry 5, but even that will not work. Keeps hanging while flashing...
Ah,
In another trhead found the answer how to flash a RUU for command line.
Tried it, and this worked.... Now running the hack-ace command again, and it is working.
So now waiting for root.
rdhaan said:
Ah,
In another trhead found the answer how to flash a RUU for command line.
Tried it, and this worked.... Now running the hack-ace command again, and it is working.
So now waiting for root.
Click to expand...
Click to collapse
So, it is rooted.
Tried some ROMs, but all of them have 1 problem: 'No service'.
So, i tried the stock HTC rom, but even that says 'No service'.
Therefore, i cannot dial anymore
Even tried another SIM, but 'no networks available'.
The strange thing is: I get the 'MMS' APN pushed from the Vodafone NL network, so it seems to have some sort of connection...
What could be wrong?
Edit: seems the switching works, because the ROM (virtuous infinity 1.13.0-aplha2) warned about switching SIMs.
After reselecting my Vodafone NL i now got network and can dial again. So it seems it hat to 'settle'for a few more minutes...