I have skype both on my X1 and laptop,everytime when connect X1 to computer，the skype on the computer will log off automatically,there is no way i can log on again，says “there is another skype working”,i can see from the taskmanager,there are two,i am sure there is one from X1,and i cannot end that one，have to reboot my computer. this problem has annoyed me for a while anybody give me a hand? by the way, my laptop runs in vista
Related
I love my everything about my MDA - However, MS ActiveSync is absolutely terrible to work with and with a mind of its own.
When I first start my PC, ActiveSync works flawlessly. I am able to update and sync my contacts and install programs with no hassle.
However, as the day goes on, it becomes increasingly moody. When I plug in the MDA, there is no indication of it connecting. No swirly green circle etc.. Control Panel does not even indicate that something is connected.
When I plug into the next USB port, there is a "Unknown Device" error. ActiveSync again doesn't activate. I've restarted the comp as well as soft-resetting the MDA but to no avail. I was advised to uninstall all the USB drivers but still no result.
Whats strange though is that the very next day, it works all fine again in the morning and the daily dismal continues! :roll: :x
Anybody else facing these problems? I've got ActiveSync 3.8 but also had the same problems with previous AS's. In fact, I've also tried different computers but to no avail!
Do you guys happen to know of an alternative? This spawn of Microsoft is driving me crazy!!
have you tried a differnt usb cable? and does your case effect how far the plug goes when you connect your Magician (assuming your using a case)? just seems like it might not be connecting properly all the time. I had issues similar to yours when i purchased a new sync cable, it had slightly shorter data pins where it connected to my Jam which were not contacting. so it would power up and windows would detect but it would give the same errors.
SpeedN
thanks for the reply mate.
Its strange as I had another miniUSB cable but the problem was still there last time I tried. Very strange - I just hope MS could iron out these problems - I've heard that they are trying to use AS to contest with BlackBerry.
hmmm...it looks like there may be a possible solution to all this. I've researched a bit and apparently ActiveSync only works at the USB port originally used to connect the phone hence why it wasn't recognized by the other port.
But my one wasn't working with either port anyway!
Another suggestion was to hard reset the Pocket PC as this is apparently a common problem. And guess what? it worked!
This suggest there being a problem with the actual PocketPC settings itself - more specifically the ActiveSync settings. As doing a Hard-Reset is quite an inconvenient thing to do, is there anyway to delete/reset the ActiveSync settings without hard resetting?
Thanks again and I hope this is of help to anyone
i had a problem with activesync as well. i was traveling so in that time i had synched my jam with maybe 4 different pc's with activesync, all on guest partnership except my laptop. so when got back it had all these problems with my desktop. for example when i explored my device through activesync and tried to copy something to the computer it would show the copy dialog box but then nothing would be on my pc. i just reformatted my har drive for other reasons and now it works fine.. so i guess reformatting and reinstalling xp works. i did a hard reset on my jam and that didnt do anything.
From time to time Activesync will lock itself up. So go to task manager and shut it down - it's 2 apps, something like wcecomm.exe and something else; there's a number of apps freeware that will do this for you- i'm at work so can't help you more with the filename.
Then restart activesync and reconnect as normal.
Sometimes it does bugger up, but I've only had to reinstall windows once with an SPV.
V
Dear All,
Please help, my new O2 EXEC is sitting here almost totally useless without ActiveSync.
I did a very stupid thing:
I plugged in the Exec via the USB cable before installing ActiveSync 4.0.
What used to happen (back inthe day 2001 etc) would be that windows would install its own driver for the portable device and then when you subsequently installed ActiveSync its drivers would not go in and hence ActiveSync would not recognise your device.
What is happening now seems like the same sort of issue in that now having installed ActveSync it is just sitting there saying no connection.
For ActiveSync 3.6 and below this is a documented problem and here is the fix
http://support.microsoft.com/kb/264693/en-us
BUT for me this does not work (well because there is no yellow unknown device in Device managers other devices).
In AUDIBLE terms
a) I get a du-duh sound when I plug in EXEC (like if you plugged in a USB key for example)
b) It shows up in the Device Manager-> Network Adapters as "Windows Mobile-based Device"
c) ActiveSync 4.0 or 4.1 does NOT give me the dulde-de-dah sound
d) ActiveSync shows no connections
Anybody any bright ideas? Surely I am not the only twonk to have inadvertently plugged in the EXEC first
Answers greatly appreciated.
BASICALLY HELP
PS: Have also looked at ActiveSync trouble shooter 2001, the ActiveSync 4.0 troubleshooting article from Msoft, tried switching off firewall, no result. Have tried deleting the Mobile-based Device, uninstalling AS 4.0, rebooting, reinstalling AS 4.0 or 4.1 then plugging EXEC,no good.
PPS: I convinced a friend to let me install AS 4.1 on his computer and then plugged in the EXEC and all was fine, so the EXEC itself is sound.
Maybe this will help:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Sorry, didn't read your message good.
Just see now you already did looked at the link....
But another idea: if your device works on your friend PC, then why not
do a clean install for the OS on your own PC?
Maybe this will solve your problem.
Dodger,
Thanks for the thoughts. Well actually thinking about a reinstall of my computer due a moments lapse of concentration is a difficult undertaking. With the backup of the on computer databases as well as over 100 applications installed, I think this would take me several person days.
Currently my thoughts are to clone the partition and then do a windows "over install" onthe clone, but logically that will not work because <of course> the whole point of an over install is that the registry and all applications are preserved.
I spent over 3 solid hours of googling, installing, uninstalling drivers yesterday trying to fix and can't believe I am the only one who has had this problem!
Perhaps somebody with a working ActiveSync can elaborate how does the EXEC show up in device manager (when its plugged in and synced), and also what device driver XP and /or Windows 2003 server would be using.
Thanks mb.
I was facing similar issue. Solution? Yes, uninstall my firewall, connect and sync with my JasjAr and then install the Firewall with Jasjar already connected !
This may help:
Open network connections on ur PC so u can see all connections.
Make sure AS (PC side) is enabled for USB
turn off JJ and plug it in to USB
Turn on JJ whilst watching the window of netwrok connections on ur PC
A new connection icon should pop up, then MAYBE dissapear again
Right click this icon, before it dissapears, and check it's enabled, then select properties
Now check the following items:
- does top box say "windows mobile based device"
- click "configure"
- under configure, is there a button somewhere (mine's working so I can't recall exactly where) that says something like "enable mobile device". If so, then you need to click this.
If this all fails, then repeat but with another USB port. The reason for this seeming waste of time is that you will get a DIFFERENT "Local area connection nn" icon, which may work for you.
I cant believe there hasnt been one mention of rebooting your PC - Which I can assume you already have done?
What OS are you running on your PC?
I have only just got my MDA PRO but this may help! as I did the same thing and for a while XP Pro wouldnt recognise the device.
Uninstall ActiveSync
Reboot PC
Install Activesync V4.0
Plug in USB Device
If there is still a problem connecting you shoudl see a USB device not recognised in your deviuce manager.
It almost seems like there is a time you have to wait before XP will respond normally to you unplugging and replugging in the USB.
Failing this you may have to uninstall Activesync and tehn remove all activesync registry keys it may have left behind! Then reboot and start again!
Just having tisproblem now, this is pïss poor of MS to still be foisting off onto us this Activesync package in such a terible state.
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Moandal said:
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Click to expand...
Click to collapse
What works for me is to turn off the handheld, and connect the cable after that. Then turn on the device if needed. Works mot of the time then.... no excuse for MS though....
Hey all,
I have some generic BT dongle for my computer that I bought a year or so ago to use with my old HTC Typhoon. The dongle allowed my phone at the time to ActiveSync over BT using the BluSoleil software that came with the dongle. However, with the HTC Wizard (MDA vario body with the AKU 3.3), I cannot for the life of me sync over BT. I have no idea what I need to set up and every time I try and do a new "partnership" in the phone for syncing over BT - i select my computer in the devices, yet nothing happens. I cannot establish any COM port communication with the computer and the only type of services that i can push are the vCard from the computer and a "personal area network"...
HOWEVER, if I take my Wizard and connect it to my Thinkpad T60 laptop that has native BT; I can sync to my hearts content... so... someone please give me a clue as to wtf I am supposed to do here to get this to work over BT
Thanks!!!
Anyone? Plweeze?
C'mon, someone must have an idea!
Gave up
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
prestonmcafee said:
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
Click to expand...
Click to collapse
Where did you get the native XP software? I could never find the native software
Plug and Play
If you don't install software, XP will operate it.
Yesterday I updated my T-Mobile Wing from the stock WM6 to WM6.1 and OpenTouch 4.0. I am running Windows Vista so I have to use the Windows Mobile Device Center. My problem is the first time I tried to sync I had no issues (contacts and email/appts). Now when I try, it doesn't even connect to my device. Anyone have any suggestions on why I'm having this issue?
BLUETOOTH?
Does Your Computer Have Bluetooth, Thats What I Used To Get It Synced The First Time?
k20y2kswap said:
Does Your Computer Have Bluetooth, Thats What I Used To Get It Synced The First Time?
Click to expand...
Click to collapse
No it doesn't have bluetooth built in or anything. Like I said, I was able to get it sync'd last night via USB and now its not even connecting.
I just went and bought a bluetooth usb adapter for my lappy. i'll see if i can get it to connect/sync that way.
I can sometimes (rarely connect) but can't sync
Any other options on why I can't sync? I'm running the wing with WM6.1 and Touch Point 4.0. My OS is Vista Home Premium so I have to use Windows Mobile Device Center.
thanks.
Yes I have one option.
When you first log in to your windows profile as your desktop is loading your computer should make a small melody sound right after this connect your phone to the computer, give it a few moments you should see the small Windows mobile device center screen start up. I know it sounds weird but I had the same issues and after months of endless research I accidentally discovered this.
The bad thing is you have to restart your computer and connect on desktop loading everytime you want it to recognize your device through Windows Mobile Device Center.
Please let me knows if it works for you.
I haven't really figured out an entirely foolproof method (haven't tried BigREDD's suggestion yet), but I usually just keep plugging it in and unplugging it until it's recognized. Restart the computer with the phone already plugged in via USB. Soft-reset the phone while it's already plugged in via USB. Make sure repllog.exe is in your startup. I've never had any luck starting ActiveSync from Programs and then hitting "Sync", but maybe you will.
Help! Cant Sync No Blue Tooth Only Boot Screen
UUUUGGG! Good grief. today has been a charlie brown day. will you please help me?
must have skipped a step flashing?
the phones connected to the computer via usb and it wont sync? , no blue tooth, to make it worst its stuck on the boot screen. i think i have the correct RUU? Anyone have ideas?
Good Morning to all,
Firstly hello to all on the forum, got my Touch HD at the weekend and have already found this forum very useful, especially in getting the favourtie people pictures to stop looking so crap.
I now have a problem I need to ask about. I have plugged my HD into my Vista 64bit machine and it picks up fine, lets me access the HD as if it was an external source. I then managed to set it up via activesync, not through choise just couldnt find anything else. Got it connected and syncing via bluetooth as well.
I have now come into work and plugged it into my work XP SP2 machine and it starts installing all the windows mobile stuff and then comes up with could not complete blah blah, when you click for more info its an unknown device.
Is this a driver issue, i.e. do I need to download one for my XP machine to recognise modern day tech?
Have got the number for HTC support but thought I would ask here first as I really like the way everyone manages to explain everything so clearly.
Thanks in advance
Jody
You should just have to install Active Sync 4.5 on your XP machine and off you go.
Appoligies if you did this, but you didn't mention above
If you still having problems, what's the full error text?
Ta
Dave
Activesync is installed, and has been uninstalled and re-installed just to make sure.
The message states that the USB device is not recognised by Windows and need to try re-installing it.
Thing is, it did just about manage a connection earlier ActiveSync showed connecting and then popped up and said unable to connect to device press ok to troubleshoot and ran some scans.
J7ody said:
Good Morning to all,
Firstly hello to all on the forum, got my Touch HD at the weekend and have already found this forum very useful, especially in getting the favourtie people pictures to stop looking so crap.
I now have a problem I need to ask about. I have plugged my HD into my Vista 64bit machine and it picks up fine, lets me access the HD as if it was an external source. I then managed to set it up via activesync, not through choise just couldnt find anything else. Got it connected and syncing via bluetooth as well.
I have now come into work and plugged it into my work XP SP2 machine and it starts installing all the windows mobile stuff and then comes up with could not complete blah blah, when you click for more info its an unknown device.
Is this a driver issue, i.e. do I need to download one for my XP machine to recognise modern day tech?
Have got the number for HTC support but thought I would ask here first as I really like the way everyone manages to explain everything so clearly.
Thanks in advance
Jody
Click to expand...
Click to collapse
Had similar problems, but it was the Windows XP firewall blocking activecync
Thanks, but we stopped the windows firewall client when we were investigating this anyway.
Possible solution
Good day,
My XP didnt detect HD as well. Im using Active sync 4.5. To work around this, go to:
Settings>USB to PC>Enable faster data sync
Uncheck this option. This solved my problem.
Good luck. Cheers
Hello, have tried unticking that box as well.
I have uninstalled Activesync again, and reinstalled off of the CD. All installs ok, plug the device in for the first time and select activesync on the handset, it installs the pocketUSB Snc on the PC and then comes up your device could not be installed properly. Open device manager and the PocketUSB Sync shows with a yellow explanation mark on it saying that the device could not be started.
Have now also tried it on an XP SP3 VM Machine, it originally kicked up same windows error. Then ActiveSync on the VM and device showed connecting, then they both stopped and no further.
Problem fixed.... Useful hint for anyone reading this... dont use a different miniUSB cable, or make sure you certainly dont use a cheap one.... I borrowed someone's in the office who was sinking another HTC device and it worked first time.
Thanks to all your inputs
Jody