Just got my dual.......missing the hardware keys though with my kaiser.
Is it possible to map the left soft key to the startmenu and say the right softkey to ok/close?
Thanks
is it possible to change the left and right soft keys?
thanks
just go to start -> settings -> buttons (dont know if its the right translation, because i've got the dutch language on mine... but there is like a PDA shown with a small blue play button :> ) . hope it's the right thing you were searching!
every time I reboot my right softkey is mapped as "Today" instead of "right softkey". I have no entries for 112 and 113 key in registry and I want to map the softkeys as left and right button because of contestual menu in manilaHD
any hint?
hi i mean to change the buttons on the bottom of the screen left and right, any ideas??
i knwo advanced config for the doamond does this but no x1 ;(((
yes it can be, use settings+, working on xperia
http://forum.xda-developers.com/showthread.php?t=421112
try the tool "keyswop". just google it
Hi,
I had problems to map hardware keys ( slider keys ) with Morph Button.
Every time I mapped a button it show the key code 229.
I read the post Key Assign Problem (Morphgear+PocketGBA) ,
( http://forum.xda-developers.com/showthread.php?t=425646&highlight=morphgear ) here at XDA Dev.
It seems the HTC Touch Pro have the same Problem.
After few hours I solved the problem.
All you need to do is:
1.
- Go to button setting in Morph Gear.
- before click the assign button press and hold the Strg key
- then you can enter the hardware key you want
now you can play by holding Strg and the mapped keys
2-
- go to global menu in Morph Gear
- in the submenu Input: click Polling Method
now it works
But in Genppc 1.09 I still can not configure keys.
Hope this helps somebody
Sorry for my english
Strg key?
Hi Bub3d
Sorry to be a dunce but can you clarify what you mean by the "Strg key"?
Thanks
andrew-in-woking
The left key in the last row.
Better known as Ctrl to us non german keyboard users.
However, this doesnt work on my dutch pro 2.
That is the great news for me, I have looked for it for a long time. Thank you very much!!!
morphgear settings
hey guys just a quick question about morphgear on the htc pro... what setting do you guys use to get the best picture and sound i love to play games but kinda want the sound is there any good settings to use to have the best sound and still get good fps? any help would be appreciated thx
Thanks worked for me on the Tmo USA Touch Pro 2
Thanks! It's work on my TP2.
Bub3d said:
Hi,
I had problems to map hardware keys ( slider keys ) with Morph Button.
Every time I mapped a button it show the key code 229.
I read the post Key Assign Problem (Morphgear+PocketGBA) ,
( http://forum.xda-developers.com/showthread.php?t=425646&highlight=morphgear ) here at XDA Dev.
It seems the HTC Touch Pro have the same Problem.
After few hours I solved the problem.
All you need to do is:
1.
- Go to button setting in Morph Gear.
- before click the assign button press and hold the Strg key
- then you can enter the hardware key you want
now you can play by holding Strg and the mapped keys
2-
- go to global menu in Morph Gear
- in the submenu Input: click Polling Method
now it works
But in Genppc 1.09 I still can not configure keys.
Hope this helps somebody
Sorry for my english
Click to expand...
Click to collapse
I'm sure there is a way to play without holding down the Ctrl (Strg) key all the time. I did it before I just don't know how I did it. Can somebody help me out?
Just remove eT9.
Button Mapping will work with all emulator and games now, like on my old Hermes.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
Hope it helps.
Worked perfect! thanks a million. Thank god cause without multi-touch, mario is near impossible to play with the touch-screen!!!
Bub3d said:
Just remove eT9.
Button Mapping will work with all emulator and games now, like on my old Hermes.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
Hope it helps.
Click to expand...
Click to collapse
worked for me too, thanks!
What does STRG stand for?
What were the original registry values for enabling eT9? Can someone check for me, please?
Bub3d said:
Just remove eT9.
Button Mapping will work with all emulator and games now, like on my old Hermes.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
Hope it helps.
Click to expand...
Click to collapse
I have a sprint touch pro 2 and did the above and i still can't map keys in morph gear. Can someone post the eT9 string that i deleted so i can put it back??? Also what does deleting this do???
Not working on my Sprint Touch Pro 2 either.... any help is greatly appreciated.
Thanks.
I solved the Sprint TP2 morphgear button mapping issue. When you go to map the keys, click the little "..." to bring up the "request button to map" pop-up.
Now, click on the bottom center of the screen to bring up the keyboard. When the keyboard is up, next to that same icon is an upwards arrow. Click that and it will give you input methods. It might be on something like "Full QWERTY", but change this to "Keyboard". You should now see a virtual keyboard different from the usual one. This maps perfectly to the slide out keyboard. Use the virtual keys to do the mapping, use the slide out to play.
dont forget to set polling methot or else it wont work
srry for my english
jtsarnak said:
I solved the Sprint TP2 morphgear button mapping issue. When you go to map the keys, click the little "..." to bring up the "request button to map" pop-up.
Now, click on the bottom center of the screen to bring up the keyboard. When the keyboard is up, next to that same icon is an upwards arrow. Click that and it will give you input methods. It might be on something like "Full QWERTY", but change this to "Keyboard". You should now see a virtual keyboard different from the usual one. This maps perfectly to the slide out keyboard. Use the virtual keys to do the mapping, use the slide out to play.
Click to expand...
Click to collapse
For the record, this also works for Tilt 2 and is my preferred solution.
No need to edit registries. Also, you don't have to hold Ctrl to play nor disable eT9, which brings other problems like not being able to edit the eT9.*.txt keymapping text files.
jtsarnak said:
I solved the Sprint TP2 morphgear button mapping issue. When you go to map the keys, click the little "..." to bring up the "request button to map" pop-up.
Now, click on the bottom center of the screen to bring up the keyboard. When the keyboard is up, next to that same icon is an upwards arrow. Click that and it will give you input methods. It might be on something like "Full QWERTY", but change this to "Keyboard". You should now see a virtual keyboard different from the usual one. This maps perfectly to the slide out keyboard. Use the virtual keys to do the mapping, use the slide out to play.
Click to expand...
Click to collapse
How do you prevent the "Input Mapping" window from disappearing when you bring out the virtual keyboard? Everytime I click on the bottom center virtual keyboard button, the "Input Mapping" window disappears and then the keyboard shows up. It's like the chicken before the egg scenario!
Hello,
First of all sorry for my English
I'm curious, whether is possible to remap(change action/function binded to key) the keys like "home", "windows", "back" and "end call"? For me, the only editable key is send key and it's not convenient. My old artemis, had much more editable key ;(
Thx for help,
Best,
Dzeus
Remapping
Have a look here : http://ae.inc.ru/aebplus.php
Cheers
cimber
Same here, I've remapped only the long_send key...
aebutton is a solution not free, and must have it always running...
Use the attached Adavnced Configuration Tool to remap keys. It has many other options also.
After installing open the software and go to Menu > More Settings > Key mapping to map the keys.
Regards,
Naveen
naveenbhatia said:
Use the attached Adavnced Configuration Tool to remap keys. It has many other options also.
After installing open the software and go to Menu > More Settings > Key mapping to map the keys.
Regards,
Naveen
Click to expand...
Click to collapse
Long_xxxx not selectable....
Even tht's not working for me also. I am remapping long press of buttons using SPB Pocket Plus.
Advance Configuration tool can be used for remapping the left and right buttons only.
Does anyone know what the Action on the left key button address is?
For some reason it has dissappeared and I want to reassign it.
cheers
stugutzo said:
Does anyone know what the Action on the left key button address is?
For some reason it has dissappeared and I want to reassign it.
cheers
Click to expand...
Click to collapse
For soft key, go to registry: HKLM\Software\HTC\Manila\
HomeLSKPath
HomeLSKText
Set it to whatever you want.
Value for Action in HomeLSKPath is \Windows\HTCActionScreen.exe