Hi,
I'm using PQZII on my Universal since several monthes and I find it very useful for pda with keyboards...but it's not necessary to say...
I find taskbar icon useful to indicate ctl or alt pressed key. But I would change the background of that icone and turn it transparent. Then I'll see only ctl or alt when pressed and that square icon on my taskbar. I tried several habitualy used colors for icon's background (255 and so...) but none was the good one.
Any idea to help me?
Thanks for replies and ...thanks for PQZII for existing )
Wat's this PQZII
PQZII is the application that allows to emulate ctrl and alt keys on a keyboard pda phone... There are some treads on it on the forum...
Here is one...
http://forum.xda-developers.com/showthread.php?t=249037
And the link to the developper site...
http://www.nicque.com/PQz/
bonisalive said:
PQZII is the application that allows to emulate ctrl and alt keys on a keyboard pda phone
Click to expand...
Click to collapse
Can I change the IE button on keyboard also .
Maybee, have a try on it, it's a freeware. On the website of the developper, there is a small app wich can give you the code of any pushed key on the keyboard. Knowing that code, you can assign any fonction or launch program or link to a key with its code. So, maybee, it's possible...
Hello,
Ive been looking all over for a way to re-map the useless "Sym" button on the xperia to a useful ctrl button, but I have found no way of doing so.
I found the program "AE Keyboard Mapper" -> http://ae.inc.ru/aekmap.php
But I couldnt get this to work either. Maby someone could help me, please
// Agaas
I've been using PQz on my Wizard to map the Win button to Ctrl. It might not be the best or the prettiest, but it gets the job done.
I have no idea how it works with WM6.1, but you could give it a shot.
Hi,
Gents do you know what are the registry keys that map the 4 buttons on the Blackstone ?
Ive tried Resco Contact Manager and it did map the "call" ( l____| ) key to itself.
I would like to remap it back to Phone/dialpad ?? (not sure how it is called in registers)
Thanks
Hi,
I had problems to map hardware keys ( slider keys ) with Morph Button.
Every time I mapped a button it show the key code 229.
I read the post Key Assign Problem (Morphgear+PocketGBA) ,
( http://forum.xda-developers.com/showthread.php?t=425646&highlight=morphgear ) here at XDA Dev.
It seems the HTC Touch Pro have the same Problem.
After few hours I solved the problem.
All you need to do is:
1.
- Go to button setting in Morph Gear.
- before click the assign button press and hold the Strg key
- then you can enter the hardware key you want
now you can play by holding Strg and the mapped keys
2-
- go to global menu in Morph Gear
- in the submenu Input: click Polling Method
now it works
But in Genppc 1.09 I still can not configure keys.
Hope this helps somebody
Sorry for my english
Strg key?
Hi Bub3d
Sorry to be a dunce but can you clarify what you mean by the "Strg key"?
Thanks
andrew-in-woking
The left key in the last row.
Better known as Ctrl to us non german keyboard users.
However, this doesnt work on my dutch pro 2.
That is the great news for me, I have looked for it for a long time. Thank you very much!!!
morphgear settings
hey guys just a quick question about morphgear on the htc pro... what setting do you guys use to get the best picture and sound i love to play games but kinda want the sound is there any good settings to use to have the best sound and still get good fps? any help would be appreciated thx
Thanks worked for me on the Tmo USA Touch Pro 2
Thanks! It's work on my TP2.
Bub3d said:
Hi,
I had problems to map hardware keys ( slider keys ) with Morph Button.
Every time I mapped a button it show the key code 229.
I read the post Key Assign Problem (Morphgear+PocketGBA) ,
( http://forum.xda-developers.com/showthread.php?t=425646&highlight=morphgear ) here at XDA Dev.
It seems the HTC Touch Pro have the same Problem.
After few hours I solved the problem.
All you need to do is:
1.
- Go to button setting in Morph Gear.
- before click the assign button press and hold the Strg key
- then you can enter the hardware key you want
now you can play by holding Strg and the mapped keys
2-
- go to global menu in Morph Gear
- in the submenu Input: click Polling Method
now it works
But in Genppc 1.09 I still can not configure keys.
Hope this helps somebody
Sorry for my english
Click to expand...
Click to collapse
I'm sure there is a way to play without holding down the Ctrl (Strg) key all the time. I did it before I just don't know how I did it. Can somebody help me out?
Just remove eT9.
Button Mapping will work with all emulator and games now, like on my old Hermes.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
Hope it helps.
Worked perfect! thanks a million. Thank god cause without multi-touch, mario is near impossible to play with the touch-screen!!!
Bub3d said:
Just remove eT9.
Button Mapping will work with all emulator and games now, like on my old Hermes.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
Hope it helps.
Click to expand...
Click to collapse
worked for me too, thanks!
What does STRG stand for?
What were the original registry values for enabling eT9? Can someone check for me, please?
Bub3d said:
Just remove eT9.
Button Mapping will work with all emulator and games now, like on my old Hermes.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
Hope it helps.
Click to expand...
Click to collapse
I have a sprint touch pro 2 and did the above and i still can't map keys in morph gear. Can someone post the eT9 string that i deleted so i can put it back??? Also what does deleting this do???
Not working on my Sprint Touch Pro 2 either.... any help is greatly appreciated.
Thanks.
I solved the Sprint TP2 morphgear button mapping issue. When you go to map the keys, click the little "..." to bring up the "request button to map" pop-up.
Now, click on the bottom center of the screen to bring up the keyboard. When the keyboard is up, next to that same icon is an upwards arrow. Click that and it will give you input methods. It might be on something like "Full QWERTY", but change this to "Keyboard". You should now see a virtual keyboard different from the usual one. This maps perfectly to the slide out keyboard. Use the virtual keys to do the mapping, use the slide out to play.
dont forget to set polling methot or else it wont work
srry for my english
jtsarnak said:
I solved the Sprint TP2 morphgear button mapping issue. When you go to map the keys, click the little "..." to bring up the "request button to map" pop-up.
Now, click on the bottom center of the screen to bring up the keyboard. When the keyboard is up, next to that same icon is an upwards arrow. Click that and it will give you input methods. It might be on something like "Full QWERTY", but change this to "Keyboard". You should now see a virtual keyboard different from the usual one. This maps perfectly to the slide out keyboard. Use the virtual keys to do the mapping, use the slide out to play.
Click to expand...
Click to collapse
For the record, this also works for Tilt 2 and is my preferred solution.
No need to edit registries. Also, you don't have to hold Ctrl to play nor disable eT9, which brings other problems like not being able to edit the eT9.*.txt keymapping text files.
jtsarnak said:
I solved the Sprint TP2 morphgear button mapping issue. When you go to map the keys, click the little "..." to bring up the "request button to map" pop-up.
Now, click on the bottom center of the screen to bring up the keyboard. When the keyboard is up, next to that same icon is an upwards arrow. Click that and it will give you input methods. It might be on something like "Full QWERTY", but change this to "Keyboard". You should now see a virtual keyboard different from the usual one. This maps perfectly to the slide out keyboard. Use the virtual keys to do the mapping, use the slide out to play.
Click to expand...
Click to collapse
How do you prevent the "Input Mapping" window from disappearing when you bring out the virtual keyboard? Everytime I click on the bottom center virtual keyboard button, the "Input Mapping" window disappears and then the keyboard shows up. It's like the chicken before the egg scenario!
Hi, I would like to remap my WP7 keys to swap around the Camera and Power buttons. Is this possible?
which ROM you use?
look did you have in programs list "Extra Settings"
If you have a rom installed that supports cab-updates it is:
http://forum.xda-developers.com/showthread.php?t=1250869
Look for Hardware Key mapping Cab