I have a Telus P4000 (Titan) that I'm using on the Alltel network... I've had no trouble converting Sprint Apache's to Alltel (for both voice and EVDO), but having little luck getting the P4000 to connect to EVDO on Alltel.
That being said, I've updated the PRL (manually) and done the basic activation and programming already. I'd like to know if there is a way to update the P4000 with the WM6 ROM for the Mogul from Sprint. The two devices are hardware identical, but I'm worried about the protected (not over-written) portions of the operating system...
In other words, will the ROM update give me access to the Sprint data network (which I can easily port to Alltel) or will that portion of the ROM (the NAM, etc.) be locked to Telus? I'm capable of re-programming the MMC/MNC and NAM settings, but I have no clear/concise list of codes or data from which to operate...
I have a P4000 to use for testing purposes, but my first obstacle is finding a way to load the Sprint ROM to the P4000 without generating a country ID error or a "vender" error (yes, it's vender, not vendor in the error report).
Any help from those (Vijay, Buzz, etc.) with the appropriate skills to get a no-ID RUU would be most appreciated.
Thanks in advance for your help and advice. And thanks XDA-Developers for giving us a Titan-specific forum... Those of us with both GSM and CDMA devices welcome the changes here.
You would have to try flashing it and see. The Sprint update does not come with an ExtROM update and the Radio/Data settings are also seperate from the ROM. The ROM just updates the OS, applications, and drivers. If it does work, you shouldn't have any problems. You would also need a modded RUU for the setup app too, that right there would prevent you from even trying. Once someone makes that, you can atleast try.
Update...
I've already tried both the Sprint WM6 ROM Update (see first post) and now the Hermes RUU No ID without success...
If anyone has a RUU for the Titan that's ID free (or can construct one), I'd like to try flashing the Sprint ROM update to the P4000. I have a 6700 as my backup, so I'll not worry about the P4000...
Thanks in advance,
Mick
How were you able to get a foreign ESN to work on the Alltel network?
Foreign ESN on Alltel
Just for informational purposes... Alltel will activate any ESN as long as the handset is compatible.
If you carry a phone into a retail center, the representative will look at a phone and either refuse to activate it or discourage activating it if the handset is not Alltel branded (and occasionally even if it is).
However, if you call Alltel and ask them to activate a handset (after having verified its compatibility) and just give them the ESN over the phone, they have little choice but to activate it. It's your account, you can use whicever handset you like.
I have activated Sprint ESN's, Telus Mobility (Canada) ESN's and Verizon ESN's on Alltel... A bit of PST prgramming is required to provision the handset to use the Alltel data network and an occasional call to data tech support to retrieve authentication keys, but overall it's been a simple process.
The greatest benefit to activating an ESN on the Alltel network (regardless of origin) is that Alltel is contract-free if you provide your own handset. So I've bid goodbye to GSM until their data speeds are comparable to CDMA... and I have no contract.
Hope this helps...
Mick
No ID RUU for the Titan...?
Anyone... ? Anyone... ? Bueller... ? Anyone... ?
Has anyone found, created or hacked a No ID RUU for the Titan/Mogul/PPC6800?
Thanks in advance,
Mick
Will Verizon activate an Alltel phone? I really like the black 6800.
6.1 ROM Upgrade on Telus With Stand Alone GPS renabled on it?.
This phone is killar that's all i can say.. nice and thin too especially for the GPS in it and about GPS someone should post how to get the sprint ROM onto the P4000, the only reason this would wanna be done is for the GPS renableing, i cant believe telus mobility want's us to pay 10$ a month to use the A-GPS mode of this Full Stand Alone GPSone chipset, Please Guys at XDA, get a patch to renable the stand alone GPS chipset on this phone Thank's from Everyone at xda)
Hey guys,
I am looking to answer a few questions for a friend.
He has Alltel service and wants to purchase Alltel's version of the 6800.
Would he be able to buy the Sprint version, since both carriers are CDMA?
I have no clue about CDMA, I only use GSM carriers.
I see the prices of the Alltel verion are rediculous on eBay.
Thanks for the help
The Alltel version is pricier...I think because the Alltel cliental is not as nearly extensive as Sprint's. CDMA is a newer digital carrier service used only in the USA and Canada I think. GSM is older but used here and Europe.
As for carrier service, I would imagine there is away to get a Mogul to work on Alltel service since they are both CDMA and even Verizon is now allowing other CDMA carrier's phones on their network. I saw some posts about transferring phones with ESN, etc. Do a little more searching. You will find the answer.
Sprint Mogul on Alltel
You can use any version of the 6800 on Alltel... I've used both a Sprint Mogul and a Telus P4000 (Canadian) successfully. I still use the Telus P4000 as a backup to my Alltel 6800.
The easiest way to accomplish using another carrier's device is to use the hard SPL (bootloader) here on XDA-Developers and then you can load the Alltel ROM to whichever version of the device you have. That's exactly what I did to my P4000...
The only consideration to affecting this change is that Sprint uses MSL's (Master Subsidy Lock) on their phones. You'll need to know the MSL to update the PRL (Preferred Radio/Roaming List) because a non-Alltel device will not update OTA (Over The Air). Verizon and Alltel (verify Verizon for yourself, I'm only sure about Alltel) don't use MSL's, their MSL is always set to six zero's... so a Verizon 6800 is the easier switch as both Telus and Sprint use MSL's for their handsets.
Good luck...
mwheeler2 said:
You can use any version of the 6800 on Alltel... I've used both a Sprint Mogul and a Telus P4000 (Canadian) successfully. I still use the Telus P4000 as a backup to my Alltel 6800.
The easiest way to accomplish using another carrier's device is to use the hard SPL (bootloader) here on XDA-Developers and then you can load the Alltel ROM to whichever version of the device you have. That's exactly what I did to my P4000...
The only consideration to affecting this change is that Sprint uses MSL's (Master Subsidy Lock) on their phones. You'll need to know the MSL to update the PRL (Preferred Radio/Roaming List) because a non-Alltel device will not update OTA (Over The Air). Verizon and Alltel (verify Verizon for yourself, I'm only sure about Alltel) don't use MSL's, their MSL is always set to six zero's... so a Verizon 6800 is the easier switch as both Telus and Sprint use MSL's for their handsets.
Good luck...
Click to expand...
Click to collapse
How in the heII did you get them to accept your non-Alltel phones??? Do you have a friend at Alltel? I couldn't get them to activate my old Sprint 6700 on my wifes Alltel line for ANYTHING! I'll bet I called 25 times trying to get it done (sometimes if you just get the right CSM they'll do anything for you). I even talked to tech support and told them that I had flased the Alltel ROM to the phone so that it was essentially an Alltel phone.
You must be good...
How to activate another carriers phone
Call them and dont tell them its not an alltel phone simply state you have a 6700 or 6800 to activate and there will be no questions or issues activating the phones, of course you will need to have the rom already updated as they will try to get you to ota activate the phone or manually program and they wont know the msl code and if you mention anything about it, then they will know its not an alltel phone also you can download alltel's version of wm6 for the 6700 and 6800 at this site without any bootloader tool.
http://www.america.htc.com/support/ppc6800/software-downloads.html
Its not really made for the 6700 but I have tested and worked fine on mutiple 6700s.
cintiajeremiah said:
Call them and dont tell them its not an alltel phone simply state you have a 6700 or 6800 to activate and there will be no questions or issues activating the phones, of course you will need to have the rom already updated as they will try to get you to ota activate the phone or manually program and they wont know the msl code and if you mention anything about it, then they will know its not an alltel phone also you can download alltel's version of wm6 for the 6700 and 6800 at this site without any bootloader tool.
http://www.america.htc.com/support/ppc6800/software-downloads.html
Its not really made for the 6700 but I have tested and worked fine on mutiple 6700s.
Click to expand...
Click to collapse
Thats really good to know. It seems reasonable that if they tell you something like they cant locate the phone in your system,tell them that that is impossible. The phone after all came in a alltel, has alltel logos on it etc. =) That chad guy from the commercial even came over and personally verified it.
Does anyone know how to get the IPhone on the Alltel PPC 6700?
Hello All,
I need to disable the wifi in the Sprint mogul 6800 for business reasons.
If you could please advise.
Jma
Is there a way to get SIP working on my XV6700 (verizon)? I just upgraded to a Samsung Omnia and was hoping to use my Apache at home as my sip phone... I've seen how to get it going with the GSM phones but I can't seem to get it going on my CDMA phone. I upgraded it to WM6.5 but I still don't have the "internet calling" tab.. Any help would be much appreciated!