Hello everybody.
i am using my htc touch hd with latest dutty rom and my car is unable to find my phone, once solution is to make the car visible and find it from my phone.
my htc s710 worked fine on the same systen in the mercedes e - class, the car downloaded all contacts automatically.
but with the touch hd, the car does not find my phone.
visible mode and bt is enabled.
i am going to try duttys wm 6.5 r1 release now.
any suggestions ?
thanks
Do you have remote SIM enabled in your BT settings?
yes i have rsap activated.
but the car does not find my touch hd i tried several roms.
6.1 roms and 6.5 roms.
Right now i am using a 6.5 rom from dutty.
my phone finds the car, but the car does not find the phone.
its a mercedes audio 50 system which works just as a headset for me, i cant use sms or access my contacts.
once way is to send all contacts into the car.
Maybe you could find silly what I'm about to tell, but...
Have you tried an original stock ROM?
And: does your Touch connect with other BT devices without problems?
i can connect to my computer here, and to other mobile phones. and i can connect to my car.
But advanced bt options are only available if the car finds the phone and not the phone finds the car, i think.
my phone finds the car, and i can use it as headset... and i can call from the car, and i am able to send contact from the blackstone to the car.
but i cannot read/write sms or use rsap.
the car told me "no telephone found"
thanks
Related
i've a new seat leon with built in bluetooth hands-free phone system and the qtek 9100.
the device pairs without any problem with the car, but automatically disconnect after a minute.
is there any way to stay connected or any patch?
thanks for help,
powerlord
same
i have the same problem.
i used to have dutty v1 rom on my hermes and was working fine
today I installed dutty v2 rom and the problem started.
I dont know if the problem is the rom, I'll check it out with another phone and let you know.
Same problem here.
Just picked up a Seat Altea XL with what I trust to be the same Bluetooth system. My HTC TyTN (the model sometimes called Hermes or Qtek 9600) gladly pairs to the car, I get the phone book etc., but after a while I get a sound and the display goes "Please insert phone". A minutes sounds about right, perhaps even sooner.
It will connect after a few minutes, but then disconnect again.
My wife's Nokia 6021 connects beautifully.
How does one check the HTC's version - and where to get other ROM versions?
i have a 2008 landrover LR2 and i can't seem to use my touch hd with its bluetooth system. i just got the car back from the dealer and they told me that they updated the car's bluetooth software to the latest release. but it still doesn't work with the touch hd.
the phone pairs with the car, but i cannot make or receive calls through the car's bluetooth system. i had an unlocked htc tytn II before my touch hd, and that worked fine with my landrover. i figured that there wouldn't be a problem with the touch hd.
does anyone have any idea of what i can do? or anyone else have this same problem?
i don't know if there's a bluetooth tweak/fix/update for the touch, but i can't find it. i've already installed the touch hd tweak program, but i don't know how to adjust any of the bluetooth settings on the phone to maybe make it work better.
please help.
akhoury said:
i have a 2008 landrover LR2 and i can't seem to use my touch hd with its bluetooth system. i just got the car back from the dealer and they told me that they updated the car's bluetooth software to the latest release. but it still doesn't work with the touch hd.
the phone pairs with the car, but i cannot make or receive calls through the car's bluetooth system. i had an unlocked htc tytn II before my touch hd, and that worked fine with my landrover. i figured that there wouldn't be a problem with the touch hd.
does anyone have any idea of what i can do? or anyone else have this same problem?
i don't know if there's a bluetooth tweak/fix/update for the touch, but i can't find it. i've already installed the touch hd tweak program, but i don't know how to adjust any of the bluetooth settings on the phone to maybe make it work better.
please help.
Click to expand...
Click to collapse
I have similar problems with my Volvo XC70...no idea what to do, as I think the bluetooth versions are incompatible...funny because my Diamond worked fine.
If anyone has any ideas, I am willing to experiment. Thanks!
Solution..................................dont sell the HD, sell the car.......
Have the dealer get the bluetooth conecting......There shouldnt be any incompatible issues.
Try it with another type of car and then go back to the dealer and try in the same car you have to confirm that its not the HD
Hi,
See this thread. It's not exactly the same problem, but you can give it a try
Grz
my Touch HD (feb09) works fine with my Freelander2 (08) - BUT - sometimes the carkit sees a different "named" HTC. Weird ???
device name
owner name - my owner input
BT name - a bluetooth name I gave it using a "settings tool"
or string of numbers, gawd know where that came from ???
Keep trying....
Hey Folks!
Great work here... Coming from WM/Symbian/Blackberry I'll try Android for daily use now.
My actual only problem is, that my Hero won't reconnect with the bluetooth System MMI of my Audi A6. Pairing is fine, manually connecting works, but I found no way to automatically reconnect the Hero with MMI when I enter the car and turn on the ignition/engine.
Every other handset does this comfortable reconnect (Nokia E71, Blackberry Curve 8900, Palm Treo 750...).
Is this a problem of my Hero or of Android itself? Is there a workaround to solve the problem to get an automatic reconnect?
Thanx!
Tom
Maybe the problem with the Hero. I cannot connect the Hero to my BMW I-Drive at all.
My G1 connected to my alpine stereo fine, when it did a small microphone appeared on the stereo along with the bluetooth icon. The hero pairs, the bluetooth appears and the phonebook is browsable, however it doesnt display the mic icon on the stereo. I think this means it's not using the stereo to pick up voice. I need to test more.
It would appear that there is something different about the bluetooth stack on the hero. Which is worrying with it being a hybrid android build
There is definitely something different. My old G1 pairs and works flawlessly with my BMW I-drive. The Hero pairs but won't connect.
Works with my Audi A4 2009. Autoconnects, I can browse my contacts etc...
Lox_Dev said:
Works with my Audi A4 2009. Autoconnects, I can browse my contacts etc...
Click to expand...
Click to collapse
That's positive. Are your contacts on your SIM or straight from a Google account? Do you have the latest MMI?
I'm about to take delivery of an A6 with HDD 3G MMI with bluetooth and wondering what to expect.
I have some issues on Skoda Octavia as well. As Skoda/Audi/VW have some things in common, I thought to mention this.
Usually my Hero works fine, but maybe 33% of the times I cannot initiate a call from car bluetooth. It starts to make a call, but fails, on Hero I get some MMI error (have to write that down the next time I get it).
When the error occurs, I can still start a call from Hero and phone audio comes nicely through car bluetooth and stereo. It requires me to turn off the engine and turn it back on to get it working again, however, sometimes it will also start working by itself. Might be that if I initiate a call from phone, it will start working from car controls as well, but I cannot confirm that.
Ik works fine on my 2006 A4 MMI, and I did test it on my new A4 2009 Model coming in december.
No issues, both show contacts and auto connect.
Did you set the MMI device as "trusted"?
Automatic connection works fine with my Audi A6 4f MMI!
After a few seconds I have access to all Contacts through MMI.
No Problems at all..
Cheers, Otze
I just have a Motorola bluetooth/FM transmitter. It's not perfect, but what I have to do is turn the Hero's bluetooth on *AFTER* the Motorola unit is initialized. So maybe enter your car with the Hero's bluetooth off, turn on the car, then once the stereo's booted up, turn on the Hero's bluetooth.
It's a bit inconvenient, but it works for me.
Also, I suspect that when we get the Eclair update, our bluetooth will work better, as Eclair is said to finally include a bluetooth API (which has been missing from previous versions, as Google said they wanted to polish it up before releasing it to developers.)
Hi, i recently got a HTC HD Touch on Orange which i bought on ebay. The phone already came loaded with WM 6.5 on and so far i love it except for one problem. I have a Datsun 350z with intergrated bluetooth. When i tried to search on my phone it couldnt see anything, so this morning i upgraded my phones ROM to the latest Dutty's_HD_WM6.5_5.2.23016.5.0.3_Leo_R5. Since then i can search and find the bluetooth device of the car, input the pin code for it and it is added in my devices tab, however nothing appears in the "Select services to use from this device" section.
I am wondering if nyone had any idea if i am doing something wrong or whether its jsut that my car doesnt support the phone? I was also thinking about reverting back to WM6.1, would that work? Also, how do i go about getting a vanilla copy of WM 6.1?
Any help would be much appreciated,
Regards
jc0r
Just a quick update. I can get the phone to connect to the bluetooth module in the car but its not easy. Basically when i put the keys in ignition that bluetooth gets power, i then have to quickly search for bluetooth devices on my phone and then it will connect. Would be nice if the phone just connected everytime to the car like my Blackberry did. Is this hardware or software problem please?
Not that anyone actually cares about my problem but i thought i post the answer up for anyone that might be struggling in future.
What was stopping my Bluetooth working with my car was having WiFi on. When i disable WiFi the car + phone works perfectly together. In my particular situation i use my phone to connect to an ad-hoc network, and because the phone is not connected to the ad-hoc when in my car the searching constantly is causing the problem. Whether this would be the same with infrustucture mode im not sure.
Hey guys,
I'm trying to connect my HD Mini with my Audi's rSAP adaptor (which is located in the center arm rest, so it's not the Audi in-built MMI-phone module). As far as I know the rSAP adaptor is identical to the adaptors available for VW and Skoda cars(?).
My Mini ist Vodafone branded, the ROM-Version is 1.11.162.1 (87652) GER, Manila-Version is2.5.20131825.1.
All of the first attempts to connect by SAP failed. After entering the 16-digit pin the HD Mini shows a message that the "Sim-Access-Adapter" wants to use a SAP connection. After accepting this screen the Mini shows the SIM Access profile on the bluetooth configuration screen for less than a second and then the HD Mini falls back to a hands-free connection.
After playing around with settings, resetting both devices I gave up and started a support call at Audi and HTC. When Audi tried at least to provide some helpful information, HTC provided less than nothing, their DACH support totally refused to provide anything! :sad: My previous HTC devices all connected fine to the rSAP-adaptor (though they weren't listed to be compatible with the adaptor). My Rose worked fine for months and also my S710 (by using the additional rSap sw-tool) are still able to establish a SAP connection while the HD Mini can't.
Then occurred the strange thing: My Audi MMI display showed the network strength symbol which is only shown if the Audi phone module have booked into my provider's net correctly.
I looked at the rSAP module: Same thing. It actually has booked into the net, which means the adaptor was able to read the SIM-card information. Next look to the HD Mini's display: It was booked into the net too but showed the "Sim-Access-Adapter" connected with Hands-free mode.
Since I'm using a Vodafone twin-card contract (second card is currently unused) having 2 devices booked into the provider's net can be explained but of course this state was extremly unstable:
My car's adaptor catched an incoming call and when I spoke and heard the voice in my car's speakers the HD Mini stroke back, catched the connection including the ongoing-call and I needed to continue on the HD Mini, while the MMI car's display showed no connection anymore.
Just a few seconds later I must recognize that the battle wasn't over: The car adaptor catched the call, (right now without SAP-mode but Hands-free mode) and I heard my colleague on the speaker again...for 10 seconds and this toggled again and again...
Since my older HTC gadgets worked fine and also the HD Mini is showing the adaptor's attempt for a SAP mode connection but then falls back to Hands-free-mode, I think that there must be some changes on the phone, bluetooth stack implementation, perhaps something with WM 6.5, it simply looks like a timing issue?
So right now I'm hoping that anyone can provide something useful. Perhaps an expert can point me to the right direction?
My last try would be to clear my second SIM-card on the weekend so that there are no contacts - perhaps this can make the difference... :-\
Any help is greatly appreciated of course!
Thanks and cheers, Alf.
Btw: Great board with tons of helpful information!
Quick Update:
I completed a hard reset to Audi MMI, Audi rSAP-adaptor, HTC HD Mini and removed all contacts and SMS saved on my second SIM-card but unfortunately no change in the behaviour of the HD Mini.
But then surprisingly another HTC support guy dropped me a line today so it seems that my support call at HTC is currently still in progress although the first HTC support contact refused any help...so let's see and wait...
Cheers, Alf.
Hallo!
Did you get any useful information from HTC support?
I'm using a HTC HD mini in a new VW Sharan with Premium FSE (so via rSAP). In general it works, but ...
a) often the connection process fails and I have to klick on "connect" manually.
b) sometimes I only get a standard FSE connection (not premium) and when I leave my car for some minutes and come back, it works again with "premium"
c) sometimes my HD mini does not reactivate the phone module after I left my car.
Michael
Although they tried to help and provided a tracking tool which logged status information about the bluetooth communication stack I never received additional help after providing my bluetooth log.
I ended in using the HDMini with the Audi built-In Bluetooth module of the MMI instead of the rSap adapter. :-(
That way the internal antenna of the car is not in use but at least the MMI is displaying the phone contacts...
Cheers, Alf.