Hi can someone help me. I need a WM5 rom WWE for my ipaq Hp 6915. I have some problems with audio on my headphone i have tested many adapters but the audio is very bad. Maybe if i do a new installation of Wm everything can bli ok. Maybe
Related
Hi All. i've got a qtek 9000 and i can't use my bt headphones.
I bought this one with the ipaq and than i succed using it also with my qtek 9090
right now i can't with the new 9000 and i have no idea how to do it
please can someone help me?
Please be more specific as to where the problem is. You say you got it working on the 9090 but not on the 9000. Exactly what part of the pairing process does the difference come out?
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Barinight.com said:
Ops, i miss it!
I installed on the 9090 an audio driver that add a new voice in the bt connection manager.
The high quality stereo headphones. This driver couldn't be installed on the new wm5 because was designed for pocket pc 2003
so rightnow i can pair the device but no service is offered when i try to discover device services.
So even if i have paired the device i can't use it because no service is found.
i hope i've explained the problem
tnk u 4 your support
Click to expand...
Click to collapse
You mean it cannot be paired without running a particular software? Yikes... So when you put the Bluetooth headset to discoverable mode, then try detecting it from the Universal, it sees it but there are just no services available, am I right?
So it seems that the one at fault is the Bluetooth stack installed in the Universal... In that case, I cannot help you... SOrry
The Universal does not support A2DP or what HP calls High Quality Stereo, as such it does not support your headphones. A2DP is suppose to be part of what is included in the MSFP update but i-mate has chosen not to include it. Until someone releases A2DP support your headphones will not work. Now if you happen to read German I understand their is a German ROM that supports this feature.
Otherwise it just a question of waiting till someone releases this update, if they do.
i think that is the stack but the question is:
the 9090 doesn't support the high quality too but installing the driver things changes so i won't belive that thare isn't a driver for the 9000
i tried to find something from Widcom (i hope is the right way to write!) nut i dind't find anythink
so i hope that someone can help me because i've payed 120€ the headset and i will love to continue using it!
Good afternoon,
Here I am looking for expert's advice. i just received this morning my new BT620s headset, paired it with my O2 Exec. My problem is that the only thing I can do is handsfree and not stereo headset. i'm quite surprised as I believed the Exec supported the AD2P profile. My Exec is updated to the latest ROM available on O2 website:
1.30.107 WWE, radio 1.09.00.
Can anyone help me ???
Is there any new roms that could add the profile ???
I'm quite desperate right now.
Philippe
The current o2 rom doesn't have A2DP
Search the forums for 'zoki ad2p hack' cab file, install this and do a soft reset and you should have the 'wireless stereo' profile
ROM ?
OK I'll try to find that !
You know I'm really a newby on PDAPhone stuff. I know a lot about PCs and MACs but PDAPhone is just really new.
I'vce been looking around the forum and seen new ROMS with new features but I'm a bit lost. Do you know what ROM I could upgrade my Exec to? I don't need the latest but one that would include A2DP and work 100% correctly.
Philippe
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
By the way, NOKIA support says that the BH-801 only supports;
Bluetooth 2.0, 1.2 and 1.1 specification,
Handsfree 1.5 (HFP) and headset 1.1 (HSP) profiles.
Erik_S said:
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
Click to expand...
Click to collapse
I could not give you an answer to your problem, but can only let you that the Nokia HS-12W works great on the new AKU 3.3 ROM's. I have the WWE version on my TyTN and the only change I had to make was to activate the stereo setting in the A2DP registry.
Previously I had great deal of problems getting the same headset to work on the SA ROM 1.35. Bitpool changes in the registry as well as Sleuths A2DP fix were necessary.
By the way I have also had amazing results with the HTC BH S100 Bluetooth stereo headset. The great thing about this device is that it allows the user the option to use their own favourite 3.5mm headset.
Regards
Hi, and thanks for your reply.
It´s seems a bit tricky to get it working, fiddeling in the program isnt something as I would prefer getting in to, as I´m a noob!
But can anyone see if the profiles that NOKIA demands is supported in TyTN?
And if so, how can I get there??
By the way, I have a swedish TyTN with following setup;
ROM-version: 1.18.263.2
ROM-datum: 07/22/06
Radioversion: 1.07.01.10
Protokollversion: 32.40.7010.02H
ExtROM-version: 1.18.263.104
Thanks!
HI,
Can any kind soul post the cab install for the WIDCOOM stack that the HD2 s using ?
NO One ?
Anyone have the cab ? Please.....thanks.
Widcomm
yeokpd said:
Anyone have the cab ? Please.....thanks.
Click to expand...
Click to collapse
Maybe that nobody understands your question. Widcomm bluetooth stack is in every HD2 rom - each stock rom and even in the cooked roms e.g. the Artemis rom.
no cab, extract a ROM, then look into sys folder and oemdriver...
Original bluetooth stack instead of Widcomm
smaberg said:
no cab, extract a ROM, then look into sys folder and oemdriver...
Click to expand...
Click to collapse
@smaberg: I have the problem the other way: I use the HD2 with the Artemis rom and would very much like to get rid of the Widcomm bluetooth stack, because it does not work with my car. I have also a diamond (original stock rom with 6.1 and standard stack) and an old touch with an 6.5 Windows with standard stack. The original Windows bluetooth stack works with my car without any problems. Is there a way to deinstall Widcomm and to install the original Windows stack at my HD2?
+1 for removal of widcomm i have similar problem but mine connects with car sudio and works well but the stack mixes sound very bad, and you cannot control the volume level on phone. So for instance when im listening to music and fireup a navigation system the commands from the system are badly mixed in with music too loud choppy cracky etc it's pain to ears. Before on xperia (with smabergs rom ) i did not had such a problem the playback was plain and smooth.
best Regards
Another one here for a way to replace the Widcomm stack as it won't work with my igo / think outside bluetooth mouse.
The stack seems to be different than from others.
I can send bluetooth messages from my HD2 to other bluetooth clients, no problem. But the HD2 does not ".AcceptBluetoothClient()"(32feet.net) so maybe the stack is somehow broken. The stack just works in one direction
anyone got Bluetooth stack "improven"
This BT Stack is crap. I can't get this device working as other phones do.
Anyone has a solution for it?
I have a Pioneer AVH-4100 car in-dash Multimedia system + CD-BTB200 Bluetooth adapter! And i can't seem to do the following:
1- Dial numbers
2- Access phonebook
3- Voice recognition
Everything else works fine, but unfortunately the most important features doesn't..
I wish JETware was compatible with the HD2..
Any idea what to do?
thx
Hello all,
as I read there is a general problem about not being able to use a bluetooth headset on an Atom (I have HP RW6815), upgraded to Windows Mobile 6.5 (I believe it is not ROM-specific, but applies to all WM6.5 ROMs).
Is there any solution or at least workaround to make the headset work on a WM6.5 Atom?
Thank you for any hint and Best regards,
d11
*bump*
I would like to ask again the same question, if anyone would care to reply...
Is there a WM6.5 ROM for RW6815 that enables Bluetooth Headset use?
I have tried three different WM6.5 ROMs (Nhocbanme, And-3 and Frantic) on my HP iPaq RW6815 but none of them enabled me to use Bluetooth headset or Bluetooth handsfree.
Thank you for your help and Regards,
D.