SMS Vibrate Duration - Touch 3G General

Hi Guys, I'm looking for some help
When I receive an SMS the phone vibrates for a good 3 seconds or so, after the alert tone has finished. Is there a way to reduce the duration of the vibrate? I've done a forum search and a few people mentioned registry values (V3 = vibrate for 3 secs etc) but I've had no joy in locating them. What I want is like an old style mobile phone, you get an SMS, the alert and vibrate start and stop at the same time.
I'd even settle for a 3rd party app (although I read about one which disables the hardware buttons!) I've tried different alert tones and different sound profiles but none give me the desired effect.
Any help is greatly appreciated.

also looking for this,
it is waisting battery and is irritating.
some help please.

Related

SMS wakeup fixed on PPC2003PE

I made a small application (freeware in the first version) which allows you to fix the SMS feature of PPC2003PE.
You know: new SMS message arrived and only a short sound is played. The screen is black. (To be precise: your device was turn on to play the sound, but the screen was turn off - turn off the video buffer completely - to save battery. But I think in this way it is not working conveniently to read the message easy and useful.)
8)
Now your PPC PE device will wakup and display the SMS message popup bouble info. And you can read it right now!
You can free download:
http://geocities.com/myppcpe2003/PEFIX10FREE.zip
http://geocities.com/myppcpe2003/PEFIX10FREE.PPC2002.STRONGARM.cab
or from pocketgear.com (f.e. search for PPC2003PE)
This application displays a small icon on traybar, where you can access the options dialog or turn on/off the fix (SMS Wakeup). If you check the menu SMS Wakeup, your device will wakeup when the new SMS message arrived. Of course it will suspend again ion the time you set in general Settings/Power of your device. Then you can decide you can hide the icon and set it to auto-run after the soft-reset, so this application will work transparently.
On the home page, there is no descriptions or screens today. I will add it later when the shareware version will start (see the grayed options). Soon. I hope.
I'm awaiting any suggestions or comments: [email protected]
I 've tried it with 4.00.16 and it works fine. You rock! Thnx!
I like the fact that it keeps the screen off, but would love to fix another problem with message notification. Could you make it repeat the notification sound?
why?
why you want to repeat alert?
I tried PocketPlus which gives you repeatable sound alerts. But in the short time, I decided I did not wanted to use it in this way. Just because it disturbes me too much (for example when I'm on the meeting), or... if I use "infinitible" it can discharge battery.
Any way.
Simpliest solution, if you want bigger alert with more attentions, it is to use a longer and lounder sound file. You can set any sound file as your alert. Even with the play-time in minutes.
But.
Please check my program MY|PHONE|PROFILE.
It will give you more options to set alert files and action. You can use storage card to keep your sound files. You can change volume. And in the next version 5.0. it will give you the option to repeat alerts: 1, 3 or 5 times. I use: longer sound file in one Profile when I'm driving or shoping, and shorter sound file (just "gong once") when I'm on the meeting, and not sound at all but only vibrate when I'm on the cinema. To change the Profile - it is only the one touch of the screen.
Selly question will this work on PPC 3.17.03 PEFIX10FREE.PPC2002.STRONGARM.cab i notice it says PPC2002.
THX
thanks,
it is just my mistypped, but it works for PPC2003 only, of course
Just another question: I noticed that Phone Edition Fixes occurs in the list of actual apps. It is a bit inconvience, because if you select close all apps also the PEF will be closed. As look at Phonext which occurs in the taskbar, but doesnot occurs in the list of running apps.
Jeffrey
why you want to repeat alert?
Click to expand...
Click to collapse
In case I miss it. One of the things MS still hasn't fixed is that alerts don't play through the speaker if you have the headphones plugged in. Since it rings that way, obviously it is possible (any programmers want to take THAT on as a project?). So I miss things throughout the day since I leave the headphones plugged in while I do my business but don't always have them in my ears.
Does Pocket Plus repeat SMS alerts? I use SuperAlert, but it doesn't do those, just reminders.
Please check my program MY|PHONE|PROFILE.
Click to expand...
Click to collapse
I was one of the early testers over on PDAphonehome and just ended up with too many problems. I may give it another shot and see if it's stable now. I liked the idea.
Carlos said:
In case I miss it. One of the things MS still hasn't fixed is that alerts don't play through the speaker if you have the headphones plugged in.
Click to expand...
Click to collapse
For a work-related project we're working on, we are also very, very interested in making sounds come out of the speaker when the headphones are plugged in.

Extended Ring and Vibration

Is there anyway of extending the ring & vibration duration?
Charlie
charlietaylor said:
Is there anyway of extending the ring & vibration duration?
Charlie
Click to expand...
Click to collapse
You can make it loop if you want
(Looping Ringtones)
This tweak works perfectly you should apply it to your ppc's:
While playing a wav or midi or a wma as the ringtone the phone has a delay of 3 seconds before repeating, now this is really annoying if you've just created that great wav,wma ringtone, spent time making it loop properly in sound editor or whatever, and then the ppc does the silly delay, well, here’s the fix...
Open the registry editor:
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Select 'Values'
And modify 'Script' by removing the w3 (eg. change 'av0pw3r' to 'av0pr')
"w3" stands for "Wait 3 seconds" you can make it "w1" or "w4" or remove to make the ringtone loops
Extending Ring
This may sound silly, but how do you edit the registry on the xda, I know how to do it on a PC.
Regards
Charlie
With one of these...
Thanks Bob
Will give it a go.
will this regedit work on xda II ??
cheers
yes it will work on all Pocket PC variants, including XDA2, MDA2, QTek2020, etc... (as long as they're ARM or XScale).
Thanks for that, will give it a go.
now be able to play with all the REG now.
cheers
Just to add another perspective, the amount of time the phone rings is actually a network setting (the time before it goes to the answering service) and can be changed by sending status codes to the service provider.
I'm sure if you google around a bit you will find the answer, but I changed mine from 20 seconds to 40 seconds, which greatly reduced my missed calls.
Surur
Edit: Done the googling for you. Check out this website (Tekguru) with a guide of sorts.
surur - that's a very useful tip - thanks a bunch for that
Hmm, few days ago, I found this reg values in the registry. I try some variations but with no success. I will check it again.
Maybe
a = alarm
v = vibrating
??
So, can I setup my phone, to vibrate periodic, while ringing continous a long WMA? Easyer to notify periodic, short vibrating, and it reduce battery usage I think.
Another question. I like siemens phones, because it plays a signal continously, while the ring-echo tone is hearable. It is good, because sometimes the started call interrupted.
With other phones like XDA, there is no signal while I waiting for the ring-echo tone. Sometimes the initiated call is interrupted, and I waiting for the nothing. The phone not notify me that the call is not completed.... :?
Can I make a Siemens-like tone for dialing?
(Can you understand what am I writing? )
Thank you!
Rayan said:
yes it will work on all Pocket PC variants, including XDA2, MDA2, QTek2020, etc... (as long as they're ARM or XScale).
Click to expand...
Click to collapse
It works also with MS Smartphones (SPV, etc...)
Extended rimg on Orange
Does extended ring work on UK Orange? If so what are the numbers?
Thanks.
i used a wma file for my incoming SMS, but when a message arrives and i am reading it, the wma file just keeps playing. Can i set this in such a way that when i open the message, the music stops?
thanks
here is the documentation on how to set ringtones
i checked msdn , but couldn't find anything about the 'script' values this doesn't mean it isn't there, maybe I'm temporarily blind.
I would like to have my ringtone Vibrate then loop without pause with increasing volume, so i tried all the possibilities in phone settings and checked the registry :
Code:
script for ring : apw3r
Increasing ring : c50apw3c150r
ring once : p
vibrate : av3w3r
vibrate and ring : av0pw3r
Vibrate then ring : v3w3apw3r
so as far as i could figure out :
v3 stands for vibrate 3 seconds and v0 stands for Vibrate continuous
p stands for play
w3 stands for wait 3 seconds
c50 sets the volume to 50 ? and C150 adds 150 ?
a & r are used as begin loop & end loop
so my final script is v3w3c50apc150r which means
1) vibrate 3 secs
2) wait 3 sec
3) set vol to 50
4) play
5) add 150 to volume
6) repeat from step 4
I'm not exactly sure about the volume settings, but it works (as long i don't change the phone settings thru control panel)
hope this helps anyone
M4io said:
i checked msdn , but couldn't find anything about the 'script' values this doesn't mean it isn't there, maybe I'm temporarily blind.
I would like to have my ringtone Vibrate then loop without pause with increasing volume, so i tried all the possibilities in phone settings and checked the registry :
Code:
script for ring : apw3r
Increasing ring : c50apw3c150r
ring once : p
vibrate : av3w3r
vibrate and ring : av0pw3r
Vibrate then ring : v3w3apw3r
so as far as i could figure out :
v3 stands for vibrate 3 seconds and v0 stands for Vibrate continuous
p stands for play
w3 stands for wait 3 seconds
c50 sets the volume to 50 ? and C150 adds 150 ?
a & r are used as begin loop & end loop
so my final script is v3w3c50apc150r which means
1) vibrate 3 secs
2) wait 3 sec
3) set vol to 50
4) play
5) add 150 to volume
6) repeat from step 4
I'm not exactly sure about the volume settings, but it works (as long i don't change the phone settings thru control panel)
hope this helps anyone
Click to expand...
Click to collapse
Nice M4io, I'll try that. thanks bro.
Ronnie
You can change the script in the registry. However, whenever you open the Phone Setting and click OK (since there's no Cancel button), the new setting will overwrite your modified script.
I like staccato vibrating while ringing normaly.
Like this:
Code:
ring: -------------- -------------- ------------
vibr: - - - - - - - - - - - - - - - - - - -
I tryed some code variations, but didn't work.
In my Phone Profiles you have "staccato" vibration. I named it: pulsed vibrate. Both for rings and sms alerts.
I know that many users have problems with my Phone Profiles, but also I know how many users use it without problems (believe me: more). I still improve my softeware and make modifications and fixes. The problem depends from another software inside your hardware. Most of them are because IDCaller is inside the default OEM system in some hardware and users cannot remove this program. Alternatively you have not to use a advanced features from my software.
I give a free trial version to check how it works with your phone.

WM5 Vibrate Timing

Hope this is the correct forum to post this in.
I am looking for someone to kindly develop a utility that will allow me to alter the standard 5 seconds that the vibrate option is set for within WM5.
As far as I am aware there is nothing out there that does this. HTC support in the UK simply say they don't have an option for doing this (thank you very much, not).
To make myself absolutely clear I am looking for a utility that will allow me to vary and set the length of time the vibrate function works for. The current deafult of 5 seconds not only uses up too much battery power but is a pain to use in a business environment.
The utility should ideally allow me to set the vibrate length to anything I want from 1 to, say, 5 secs in single second steps.
If anyone is able to develop a fully tested tool for this then please let me know.
Many thanks in advance.
WB
@wb: You dont need a tool for this. You can simply make a few simple changes to the registry as shown here:
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
If you want to change the settings quite frequently, and find editing registry again and again cumbersome, creating a tool for this shouldn't be too difficult and i'll make it when I get time but first try it by hand and see that if it works for you...
Nice tweak but it won't survive a profile switch!
It goes back to default.
Is there a way to make a permanent change?
Secondly, which script should I use if I want, when I receive a call or SMS,
the phone to play the ringtone and at the same time vibrate every 3 seconds for 1 second?
Shantz,
I definitely need a tool for this.
The registry tweak in the wiki only works if you have ring and vibrate set together. In that instance the vibrate lasts for the duration set for the ringtone.
If you set the phone to vibrate only it will ONLY vibrate for the standard 5 secs. It WILL NOT vibrate for any other time period set by the registry change you refer to.
Trust me, I have played with this for hours and got nowhere. I have also been in touch with HTC who confirm that on vibrate only the phone will ALWAYS default to the standard 5 secs as there is no script within WM5 that will allow one to set parameters around the vibrate timelength only.
So to summarise; you can change the vibrate time period so that it aligns with that of the ringtone; however if the phone is on vibrate and you get a notification come through, eg a text message, it will vibrate for the standard 5 secs set within WM5, irrespective of the settings of the registry tweak you refer to in the wiki. The only time the vibrate will use the settings set in the registry key is if you get a phone call come through, in which case it will vibrate for the same length of time set for the ringtone, else it does not work. Hope this is clear.
So can you help please?
Thanks
WB
so then why don't you make an empty ringtone - no sound but a ringtone file nonetheless? With that ringtone selected you say yourself you can vary the length.
Hufkes,
Because that's not what I am looking for. Your suggestion is an inelegant fix, akin to sticking plaster, not a solution.
I don't want to be fiddling about with the phone just before I go into a meeting to set a blank ringtone. I prefer to do what I do now: 2 taps and vibrate is engaged, full stop.
That's why I need a tool that can allow the user to set the vibrate length, something Microsoft should have thought of in the first place!
Anyway thanks for your input.
WB
hey wb: I will make u a tool for this...but ull have to wait for some time...i have an interview coming up next week, so not much time right now...
Yes please me too when you get a chance. Been the thing I have missed the most.
GOOD LUCK with the interview too
Shantz,
Excellent offer very gratefully received. Yep, once you are past the interview give us a shout.
Hope the interview goes well by the way.
Cheers chap, you're a good 'un!
WB
Shantz,
Are you back with us yet to kick this off?
Cheers
WB
Hey wb,
am sorry the interview has been rescheduled for this sunday...so though I do have "some" time but not enough to put into coding, i'm using that extra time to get some extra rest as the past few weeks have been quite hectic, especially the last week where i spent quite a lot of time studying...but dont worry i have a kinda layout in my mind for ur needs...will work on it as soon as im free...
OK mate, cheers.
You had better get that job! Good luck.
WB
finally had the telephonic interview just a couple of minutes ago...lets see if they call me or not..
btw ill start working on ur prog tmrw night if i dont have to go to a frnd's wedding..
I wish you luck.
In terms of the development of this tool, what I had in mind was, say, a script that would pop up some kind of dialogue box which would then allow you to set the duration of the vibrate. Duration could be from 1 seconds to the current 5, in 1 second steps, set either from a drop-down menu or chosen from 5 available time options presented on screen.
Once the vibrate length is set in this way then I would expect to be able to switch vibrate on, as one does now, and then have the vibrate for an incoming message (NOT a telephone call as the vibrate frequency works differently for this) occur for the set duration eg 1 sec or whatever.
Hope this makes sense. If you need more detail in terms of how I see this working, let me know.
Thanks again.
WB
hey wb,
i've just started on the proggie.. However it does not seem possible\feasible to "set" it using the earlier native way. I can fulfill the other options and give u an exe. Whenever u want to set the vibra mode with ur options, u can tap on it or bind to a hardware button. Is that ok?
wb, can you download the attached file and run it on ur ppc. check when u tap (or dbl tap) then does ur device vibrate...just checking whether the vibration code works on ur device or not...
Made a sample app for u...try this and let me know...
just tap on app to create start and stop shortcuts...then click on start shortcut to add notification for device to vibrate for 5 seconds on incoming sms.
jus check and lemme know if it works..this is a very quick implementation so i'll have to keep my fingers crossed
Hello Shantz,
Seems like you got over your illness then.
Just got home and seen your message. Have downloaded the Vibra file to the Tytn.
I ran it and it created the Start & Stop shortcuts as you indicated. Tapped on the Start shortcut but nothing happens. I guess this was not what you were expecting?
Just to be sure I soft booted and ran the whole lot again, same result.
Cheers
WB
yeah, am almost fit now...the fever's fully gone and tonsilitis is almost 60-70% cured..
actually, i had attached two different versions to this thread.
the first version will just make ur phone vibrate for 2 seconds instantaneously.
The 2nd version will not do anything at the very instant when you tap the start shortcut, but will start listening to incoming sms's. When you receive an sms, it will vibrate for 5 seconds...this was the intended behaviour..So let me know if you see anything happening on receiving an sms..
wb, I've found out why the app might not have been working. I use smssetmessagenotification api to notify my app whenever an sms arrives, now I found out online that there are 2 problems related to this:
1. This API is known not to work reliably, infact i found only a handful of ppl out of hundreds who cud get it working and that too sporadically.
2. Ppl suggest that even if interception of sms notification works (by this api or any other method), then ur normal sms functionality will be lost as this notification goes only to the first available receiver and is not "passed-through" to all the listeners.
I'll do some more digging on this but looks like wht u want might not be possible after all (atleast without a "slower" workaround, I think i can set a notification alert on the "unread sms" registry entry and diff it with previous value for any notification to see if there is a new msg and then run the vibra thing...will that work for u?)

Custom Vibrate while playing Ringtone? Possible???

Hi everyone. I have searched a lot in the forums and even though I found a few threads that raised this question, none of them provided a solution, so here's the question yet again.
Is it possible in Windows Mobile (I have 6) to have something like a pulsating vibrate while a ringtone is playing??
I tried fiddling with the script in the registry HKCU\Control Panel\Sounds\ringtone0\script, but couldn't get it to do what I wanted. The best I could manage was a repetitive vibrate without ringtone, and the repeat couldn't be less than 1 second.
Does anyone know of ANY way of having pulsating vibrate while ringtone is playing, be it a comercial program, or a registry setting, or something like mortscript????
Does no one have any suggestions like where to look either?
Bump.
I'd like to know this too
http://forum.ppcgeeks.com/showthread.php?t=6748&highlight=ring+tweak

Notifications Sound Files

Hi all,
Wondered if anybody knows the location of a sound file I'm looking for and haven't been able to find ?
I have Best Reminder installed and have set Alert-Soft as it's reminder tone, and have also set this sound in Settings-Sounds & Notifications-Notifications, as my alert tone for missed calls, new sms,mms,email etc.
So when a new sms arrives for example, windows should make the Alert-Soft sound once, which it does, then Best Reminder should make the sound every X seconds as specified, but everytime the reminder sounds, windows is playing an extra sound as well, I have attached rough recordings of the two so you can hear the difference.
I think windows is playing this because of the missed calls popup it's displaying everytime the sound is played, so I either want to turn off the popup, which would be preferable but I think impossible, or extract the sound file and replace it with a silent version.
The only way I can find to stop it is by unchecking Notifications (alarms, reminders), but this also turns off all other notification sounds, so there is no initial sound when a sms,mms,email arrives, which is obviously no good.
Any help you can give me will be much appreciated.
Thanks Dave.
Found a solution to this in case anyone else is interested :
The file making the sound is \Windows\Alarm2.wav and is also used by some of my other apps, so I didn't want to make it silent.
So I made a silent wave file e.g. I called mine Silent.wav, and place it in \Windows.
Then edit the following registry key HKCU\Control Panel\Notifications\Default\Wave
By default it's set to \Windows\Alarm2.wav so you just need to change the string value to point to the empty sound file \Windows\Silent.wav, and job done.
As far as I can tell this only changes the sound used for notification popups, I've tried all the other apps I use that use Alarm2.wav and they still use it ok.
Hello,
This is the closest thing I could find to an answer to my issue:
I want never to hear the sound "alarm2.wav" again. I hate it. Every time I want to soft reset, every time i want to add a calendar event from email to my calendar (sometimes i have to do like 20 in a row, and i hear that god-awful sound every time) every time any pop-up notifier message appears.
I changed the value for HKCU\Control Panel\Notifications\Default\Wave
to \windows\quietest.wav
In fact I went to all the settings and changed anything that was alarm2.wav to something else...
But to no avail. I cannot replace the file with another "alarm2.wav" as this is a ROM file and cannot be edited. I am so surprised that this has proved to be such a challenge! I have been able to customize so many things, I never would have anticipated so much difficulty in changing a simple sound

Categories

Resources