Hi, today I've problem with charging my prophet g4, it's loooong time on adapter but still shows just 32% of battery, yesterday was all OK, I can't flash him, PLS HELP MEEE
the small light is yellow?
open th back cover and put out the battery and leave the device like that for 15 min or more then put everything in it`s place and try with other charger it`ll be work
Related
Desperate for help, please read and give advice!
Had a Jasjar for almost a year. Battery started to weaken, so went on gizmos2go.com and bought a replacement. Already with the old original battery, Jasjar started to act weird: power meter suddenly dropped down to 12% and in two minutes back up 80%. With the replacement battery things got much worse. Restarted, insufficient battery power message came on often, car charger did not charge it at all and finally when I took off the wall charger, the charging icon would not change back to power meter until reset.
So I took it back to the shop (in Europe) before the warranty expires. They sent it off to Italy to get it repaired at I-Mate, suggesting it will need a new motherboard. 30 days passed, phone did not get back, so I got a brand new one with a newer ROM, without the original battery.
At first all was good for less than a day. I reinstalled all my software and started to get a message that there is not sufficient power to supply the SD card operation. I paniced, took the card out, no issues for the rest of the day. But this morning green solid led light on (battery charged). I unplug it, try to turn it on, screen blank, green led on. Reset: screen dead red solid led light. Plug in the charger and starts charging from 0%. Charges in one hour and now it seems to be fine. For now…
Anyone had similar issues? Solutions?
Can it be the battery? Is there a way to check it at home?
Can it be a malfunction of the SD card? There is no visual physical problem and works fine in my pc.
Can it be the charger? No name car charger, pc USB cable?
Can it be any sw?
Please, help! Thank you,
IZ
I think its the issue with ur battery coz in ur earlier case and the newer one ur battery was common which had the same problem not with ur sd card , try use with ne of ur friends battery for a day the things will pretty much b narrowed down with the problem .
Hello all!
So I have a qtek 9100 and tried to flash with "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe", the installer started, the wizard was showing me the white screen and progress bar, sudently I get an eror message from pc, and guided to repair the erors. Meanwhile my phone gone off, and now it does not want to open, i tried hard reset, but seems nothing is bringing it back to life. I measured the battery and my voltmeter shows 3.8V, so i guess the battery is ok. I tried removing the battery and putting it back on but it doesn't turn on.If plug it in the wall charger, it doesn't lite up the charging led.
I'm kind of swetting...what can I do now?
try to take the battery off and wait in 10 minutes before you place it in.. try to on it after that.. that might help.. have heard it has helped many here in this forum.. either your bricked it or not.. 10 minutes will or might show..
Thanks for the quick answer, i'm waiting now to see if it works.
Any other tips are welcome.
no...no result...it still doesn't go on
Is there no way to Jtag one of these phones?
Sorry...what "Jtag" means?
Is there any chance that when i tried to flash my ROM to burn my battery?
Hi i have a problem. Yesterday my Prophet battery goes to 0%, when i back to the home I plug-in it to charger. The light-emitting diode start flashing, but i can't turn on my phone. After 8 hours connected to charger Prophet still won't work. DO you have any idea? Maybe this is battery problem?
PS. Sorry for my poor english.
same with me,my dopod 818 pro won't turn on after 2 month not use,i try to charge,but the led not light..its off..i have no idea witn this problem,please help me to solve.thanks
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
errhec said:
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
Click to expand...
Click to collapse
Oh.. great! do you know which pin of the battery is (+) and which pin is (-) pole? I want to charge the battery by a balance charger.
happened to me couple months ago
and i used desktop charger for 5 minutes directly on the battery
then plug it in and charged normally with usb connector
used the desktop charger on the first and last pins on the battery
Hello, i'm sorry, my english is bad. but i wanna help.
Now, before 1 week i have the same problem, my qtek s200 after update whit wm6.1. OK 1 month everything was ok, but after that /i don't now where i go wrong but no matter/ that my phone start stuck in bootloader. I let it one night on to see, maybe will turn,and at the morning he wont start, even the light wont start wen i put the carger on. I take one charger/from sony erricson/ cut cable, there are 2 cables, take off the battery of my pda, put directly cables from sony charger in to battery, black is minus, red is plus, but don't worry, there is no problem if you make mistake.Let it like that 1-2 hours, put battery back on pda and everything will be OK.Now in my case my ROM fu** up, i go to tree color screen/see more info how to do that/ and replace the ROM.and next time do not full dry the battery.Hope i help.
Hello,
My problem is that a morning my battery was 5% left, I switched it off and thought to recharge it later on. Night came to home, put it on charge (wall AC Charger). After 4 hours nothing .. no answer, no charge. Tried to switch it on, tried to reset it. BUT nothing happened.
Now I went to this thread : http://forum.xda-developers.com/showthread.php?t=374108
If this is what happened? Should I do this? Or any other solution?? Thank you very very much of answering.
Regards,
Usman.
please help me!!!
anybody???
try to put our your battery out of the phone at night, go sleep, and when awake put to phone and try to turn on, if it don't help, try to recharge manually
that's the problem...! i can't recharge manually!!
i did the jump start.... now the red light is on!!
what does red light means....? i should leave it for charging or it will never chanrge now??
Jump Start
Jump Start may or may not work with your problem, you may need to charge your battery with external charger because after getting fully discharge it will not come on re-charge state.. you may say it is a design flaw.
If you don't have external charger than try to put positive and negative wire keep in contact for more than 5 minutes ( as described in jump start trick for 10 to 20 sec) but do this only at your own risk.
my recomendation is to use external charger.
i am also having this kind of problem with my wizard but my battery is not discharged my phone battery is draining out with no reason. i bought a new battery for my wizard but same result. If anyone can help me i will be very greatful.
Regards.
hi all, pls anyone knows how can i solve the issue of red led and not power up? i tried to connect first the charger and later put the batt and nothing, the fuzes are good, the batt its ok, i tried the instructions of mike channon and other topics and nothing again... i apreciate the schematics of this model, thks for your time.
I had a red LED on my device ones, that happened when my battery got flat drain. Maybe you can try charging it for an hour or more. Then try it again..
thks for your reply, i tried to charge for > 1 hr. wkth two batt. and nothing, i thing the failure is a component defect. for this i need the service manual for MB repair or schematics for make a plain of conections for determinate the issue.
Just in case... certain non-original batteries seem to have one of their sides made from metal or other conductive material. When such a side touches the metallic frame of the battery holder, here you go - the red light goes on and the phone won't boot up/charge.
I had to put a properly sized piece of paper between the battery and the frame on my Hermes to make it work with such a battery.
i am haveing the same problem but i have a factory battery ,i try changing battery ,maybe this may help it accour when i connected to my laptop to charging it ,it was working find then five mins befor then red light , and not powering back on need help plz
i had this problem for about 3 to 4 weeks nowi try everything different oem batterys , try car chargers , laptop usb charger , dest top charger usb , while chouching on another forum some1 say try rapidly placeing and removing a battery , i try it about 30 times and it worked!
THE RAPID REMOVAL/REINSTALLATION OF THE BATTERY WORKED!!!