Not sure if I have a bad unit. On the bottom of the screen along the bezel, from the middle to the bottom right where the hinge is, if I press like I am tapping the screen, the screen flexes downwards. It actually feels weird when using an on screen keeboard and pressing the bottom row of letters/numbers.
Anyone else have this
Most if not all Dreams are affected by this. It's a flaw of the way the screen hinge is designed. Do a search of the forum for more details.
Related
Today I noticed that my 8525 has a weird red tint on the screen whenever I close the keyboard. On the right hand side of the screen, there is a line, and everything to the right of the line has a weird red tint. If I open th phone slowly, the line dissapears at the same rate that i'm opening the phone. It almost seems like something underneath the screen is... pushing on it from below or something? Just a guess. Also the screen's alignment pretty much doesn't work at all anymore, like its the curser will either be on all the way to the left, or all the way to the right. never where i am pushing. Quite annoying.
Thanks for any help!
Me Too!
The same exact thing is happening to my phone too. Sometimes when I slide it back and forth a lot it will dissapear but come back again later when I move the slider. It appears when the slider is slightly off of the closed postition. It never appears when it is open. I think it may have too do with the cable being loose between the main body and the upper screen part or the magnet which detects the slider postition is interfering with the LCD. Any solutions yet?
This is my first phone with a capacitive screen, so perhaps it is a quirk of them, but I have noticed that if I am not holding the phone in such a way that I am touching the metal bezel, the screen does not recognise touches that are close to the edges of the screen. It seems that the screen requires a circuit to be made with other metal parts on the phone before recognising the touch.
For example, if I put the phone on my desk and touch the backspace key with a single finger, nothing happens. If I keep holding my finger on it, and touch the metal bezel, hey presto, the button clicks.
This reminds me of a watch a friend of mine had a long time ago, that had a capacitive "hair trigger" button that only worked for him (because it required a circuit to be made with the back face of the watch, meaning when he pressed the button it completed a circuit through his body)
Anyone else noticed this? It is slightly annoying because I have to hold the bezel when I want to use the phone..
Confirmed.
And you might very well be correct in the assumption about the circuit not closing in every part of the screen. I think it's the nature of any capacitive surface tbh. If you press in the middle of the screen then there is enough adjecent space to actually complete the circuit while on the edges there is simply not enough space around your fingertip to not close the circuit at all. That is why touching the bezel works.
But as I have been holding my little Hero in my hand while typing anything I simply didn't know this little odd thing. I have read about it though.
Yet another reason to hold your precious little Hero in your hand...
Wierd not like that on my samsung.. its all plastic tho
Mine is the same.. especially on the right hand side of the screen. If it's in a case it makes it really bad!!
Sounds like bad shileding and grounding to me
Didn't notice this until I put a screen protector on but now it's really bugging me.
On a related note (metal bezel related), I've noticed that in dim lighting the button backlight flickers. But if i touch the screen and bezel, it stops.
herman3101 said:
Didn't notice this until I put a screen protector on but now it's really bugging me.
Click to expand...
Click to collapse
Same here. Could it be that the screen protector slightly touches the aluminium casing and thus grounding the screen (or creating a wrong potential)?
I noticed that when i touch (=ground) the outer aluminum frame with just one single finger then the touch screen works flawlessly.
(I'm using the offical HTC screen protector).
joemax said:
On a related note (metal bezel related), I've noticed that in dim lighting the button backlight flickers. But if i touch the screen and bezel, it stops.
Click to expand...
Click to collapse
Hmm definatly bad grounding issue. Its either some pretty poor design or a defect.
i confrim, using hero without touch the metal edge result in less responsivity and difficult on multitouch operation
hope new firmware can solve this, too many errors using it like a normal keyboard on a table!
Hey,
I just realized that the buttons (the 5 buttons at the bottom of the front face) on my Leo are moving a little bit.
It's hard to describe but there is a little gap around them and I can move them up down left right. Is it normal?
Same here on mine, seems to be some kind of manufactoring tolerance.
Yes .. that is normal.
Yes it moves around 1mm around...
and HTC raised the on/off button (rightmost) a little higher (0.1mm) than leftmost ..dont know the reason why..
same for me
Mine are all roughly the same height but the off button is stiffer to press and the home button is really quite soft to press.
Can any others confirm if this occurs on your device. With the keyboard out if I press the bottom right corner to the keyboard portion I hear a distinct sound like its loose or something..
Mine creaks when I push that area, I'm not to worried about it any slider phone I've had has done something like that when the keyboard is out.
Yes that's exactly the sound I was referring too. Creaks... Any others confirm? As long as others are experiencing this I won't worry too much...
like rsacipher said, just about every slider I've seen creaks a little bit. if that's all it is i wouldn't worry about it. however if the sliding screen feels loose or if there's a gap between it and the main body then i'd definitely have it replaced.
I've been having a weird screen issue lately, independent of rom or kernel; my screen won't respond to touch input directly beneath the status bar.
For instance, if I touch an icon or button at the top of the screen, it does not respond at all... Unless I rotate the phone into landscape mode and select the command.
The status bar itself works fine, I just have to tilt the phone to use the area of the screen underneath it. Weird.
Just a shot in the dark, do you have a screen cover that might have lifted a bit?
ca1ne said:
Just a shot in the dark, do you have a screen cover that might have lifted a bit?
Click to expand...
Click to collapse
I have a matte, anti-glare cover, but it's tight as a drum. Not even an air bubble.
Similar thing happened to my last phone. Only it was the bottom corner. Never found a solution. Ended up getting new phone.