Hi there.
I'm tryin to use my Touch HD with my Kenwood DDX8022BT and there's one big problem! Pairing works as A2DP does. Phonebook etc. is syncronized. But when i try to make a call from Kenwood when the HD is in Standby nothing happens! receiving calls works fine. If i make a call from phone it also works.
status indicators on Kenwood working only with Jetware software installed on phone.
Whats the matter? any ideas?
Thanx
Related
Is there any possible way to repair the BT annoying thing?
I've got a Parrto BT set in my car and the tytn disconnects all the time, when I achieve the connections I cannot transfer my contacts...
Thanks for your help
Hi,
Which model of Parrot car kit is it? I use the CK3100 (the one with the LCD) and it works except for the usual TyTN switching BT off when it disconnects from the Parrot after stopping the car. Sync works fine.
Might also be worth looking in the Parrot forums at http://www.driveblue.com/
Gav.
Parrot
I also have the 3100!!
When I get into the car it doesn't recognize me. I need to go to congiguration and establish the link, the it seems that it starts to sinchronize the agenda but it doesn't!!!
Hi again.
Is there any chance you have the power cables to the Parrot CK3100 the wrong way round? If that is the case then the Parrot CK3100 will forget the pairing to your phone and you will need to re-pair everytime. The easiest way to fix this is to reverse the wires at the fuse.
Basically there are 2 wires on the Parrot Parrot CK3100, one perminent to the battery for saving the memory and the other is the ignition. When the ignition goes to 12v then the Parrot CK3100 powers on and tries to connect to the phones in its pairing memory list (upto 5).
Do you know which firmware is on your Parrot CK3100? The latest is 4.15b > it's under the Advance menu.
Gav.
Don't think so
I don't think so because it worked perfectly well with my Blackberry!
Got my TyTN yesterday (had a Wizard) and so far it works just fine with my CK3100. Syncs nice and fast and connects within 10 seconds. I did install Jetware mobile extender to make the display a little better. Haven't experienced the TyTN turning BT off yet...
Hi Pablete,
Strange. I can only suggest re-pairing and updating the Parrot to the latest firmware rev.
Hi Scott,
What advantage does Jetware mobile extender give?
Gav.
Jetware changes the "network OK" to the real network name, adds signal and battery bars, adds the phone ringtone instead of the Parrot ringtone and several other cool features.
Edit: the URL... http://www.jetwaremobile.com/
problem BT and voice dial
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
re960088 said:
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
Click to expand...
Click to collapse
Not completely sure I understand the question? If you meant to ask if it is possible to do voice dialing in the carkit instead of the phone then head to the voice commands menu, and in the bottom you'll find an option to change where voice commands are processed; carkit or phone.
i meant when i push the parrot green button the application voice dialer switches on on my TYTN, but no beep can be heared tru the car speakers?
with the newest cyberon voice dialler i can not confirm or redial, even if used outside the car?
Any suggestions
Hi,
Received my HD2 a few days ago and had no problem making calls with the OEM BT Handsfree of my 2009 3-serie BMW.
Until I discovered that I coudn't use it to receive calls !
The HF picks-up the call OK via the iDrive or steering wheel button, but audio is dead. Both parties can's hear anything.
It's actually possible to make it work two ways: first, by answering the call via the phone button instead of the car's one, or second, by answering with the steering button or iDrive having no audio first, then by going to the phone and disconnect and reconnect the Handsfree via the phone menu and at that point the audio comes back working ok.
It is a real disapointment as my previous Diamond touch was working flawlessly in the same car.
Not to mention that it pretty useless like that because of the danger implied by trying to rush to the phone in a deap pocket or in the arm's rest compartment to push the answer key.
I hope HTC will fix that soon as it pretty useless for guys like me, working 2h of their day in the car. It seems they changed from a MS BT stack to a Widcomm, loosing compatibility in the process...
Anyone experienced the same yet ?
Yves.
Yes, i have similar problem with my BWM X5 Bluetooth.
When i am on call and same time put they key can't hear nothing from phone and from hands free. Same is if go out from the car and have call in same moment.
With my previos phone HTC HD - all working great.
Ok, thanks for the reply.
I really think it is due to the change of BT stack.
BTW, did you file a ticket to HTC support ?
I did yesterday, obviously no answer yet but could you do it too ?
The more we are, better are the chances that they do something for the next rom.
Hello,
here is my issue with the BT connection: I have a Pioneer F900BT unit in my car. With my previous Nokia E66 everything worked just fine.
Now, when connecting with HD2, conection works ok, phonebook is downloaded ok, BUT: when there is a call, the music in the car is not silented automatically; what's worse, it seems the phone doesn't send any call identification to the headunit, since all the history (outgoing, incoming calls) is empty. So, I cannot redial or see who's calling me.
I did try the fix in the registry described earlier on this thread, but it doesn't help.
Any idea?
Thank you.
I have a 2008 3 series and have no problems at all, connected first time and has worked flawlessly ever since
twisted-pixel said:
I have a 2008 3 series and have no problems at all, connected first time and has worked flawlessly ever since
Click to expand...
Click to collapse
Same here with an e92 (08/2008).
Hi,
I have a Touch 2 and I am having troubles conneting it to my Volvo BT carkit.
With my S730 evrything worked fine.
Now the phone paires with the car and syncs the adressbook, but when I initiate a call from the car or the phone, the carkit just doesnt know he is in a call and does not mute the radio. I don't hear any sound through the speakers at all, but the phone thinks it is connected to the carkit and is in handsfree. Pretty anoying as you can imagine.
I upgraded the car's BT stack to the latest version 04.23_R but with no result. Disabling the data connection worked for some people but not for me.
Do you guy's have any registry hacks or procedures I could try?
The old phone worked great so there at least should be some backwards compatibility.
Thanks,
Jan
Has anyone got any suggestions regarding the following problem:
HTC Tattoo (UK Orange but flashed with stock ROM)
Nolia CK-1W Bluetooth in-car handsfree kit with Telemute harness(sound through car stereo)
Phone paired with system and connects perfectly every time I get in the car.
Outgoing calls work perfectly.
Incoming calls - mutes music on stereo, rings over stereo, pickup via phone or handsfree remote button NO SOUND from caller(though I can hear them on the phone speaker).
Seems to me that it's either a bug in the Bluetooth implementation on the phone or a setting I havent found. (It works fine with my Nokia E51)
Any ideas?
Thanks
Hi...!
I have the same Problems with my Nissan Car Headset from Factory with Android 2.1 and 2.2...! Similar Problems are with the HTC Wildfire and HTC Desire
I can connect the phone with the System, Phonebook reading, take calls and arrive calls but i cant hear anything (on both sides)
With my original Tattoo Rom 1.6 its working perfect and Audio Streaming too...
according to the German HTC Support the problem is well known and they are working to fix the problem... but i cant find other Android users with the same Problems except you
Why????
Thanks
Hi,
I'm using a Parrot CK3100 carkit and it works fine in WM, however in Android I don't get any sound. The bluetooth connection works fine.
When a call comes in it shows the caller ID and call duration on the carkit screen but I cannot get any sound.
Please assist because I don't want to get a fine for not caller handsfree.
BTW I'm using the r167 version....
Thanks for your help and keep up the good work!!
its an issue where the devs are working on for the moment...
http://code.google.com/p/photon-android/issues/detail?id=34