i have I-mate JAMin
-----------------
IPL - 2.20
SPl - 2.13.0000
GSM -01.14.20
---------
When i on the phone .phone gon usb MODE. not going ok mode and only show usb mode.
so how can upgrade or downgrad this phone.
plzzzz solvetion want.
plz any one sovlution about this?
Install a original WM5 Rom and read hera about bootloader and hardspl or softspl. Here are so many treads about your problem.
Hi
I Have HTC Arte100 Start up Hang Only 02 Displayed And I Also Tried To Hard reset My Device Reset Complete But Same Problem.
I Have Two ( RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship and Another One ) Rom For Artemis and I Tried With This Rom Show Invalid Vendor ID
Now I Need Another 100% ROM PLS help me
Details :
IPL : 1.25.0001
SPL : 1.25.0000
GSM: 02.67.90
OS : 1.25.0.0
Still Waiting For Reply ....................
Devices
This is a patch for HTC Artemis devices (HTC P3300 / T-Mobile MDA compact III / O2 XDA Orbit / Dopod P800W / Dopod P800 / Dopod M700 / Orange SPV M650).
Definition
IPL: Initial Program Loader
SPL: Second Program Loader (System Programing Language does not make any sense)
IPL Trigger SPL and then SPL activate the OS
Disclaimer:
This is free to use but at your own risk, I take no responsibility for any conflict, fault, or damage caused to your phone by this patch/unlocking procedure. No warranties of any kind are given. Any commercial usage prohibited.
************************
Patch IPL (For phone already USPL) :
IPL for G3 or G4
Instructions :
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Use ROMUpdateUtility.exe
Why
Just have the on of the last IPL
************************
Patch IPL & SPL :
IPL for G3 or G4
SPL : 1.11.cmon
This means you can flash ANY ROM to your Artemis after flashing USPL on it, no need to pay for CID unlock anymore!
Instructions:
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. See USPL Thread for more information
Why
You can upgrade IPL and USPL your phone.
************************
Thanks to:
cmonex, Shady313 and pof
Thank for an update IPL.
Thanks very much!
Hi everybody, i have some problems with my htc touch gsm: i flashed my phone with HSPL 3.10 and than with Onyx WM6.1 ROM, but now i have to send the phone to the HTC service, so i have to flash it with original SPL and ROM!
I found the original ROM but if i try to flash the phone it give me an error, i suppone i have to flash the original spl first.
And than...can anyone tell me where to find this original spl?
Thanks a lot
Hi, i successfully flashed my elfin with the original Italian ROM found in this forum.
Now i don't know how to restore my original SPL :'(
If it's useful those are my device informations:
Touch version : Elfin
Device ID : ELF010050
CID : HTC__405
IPL : 2.20.0002
SPL : 3.10.cmonex (Hard SPL)
ROM Version : 2.20.408.1
ExtROM Version : 1.11.408.101
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0300
Part Number : 99HEH045-00
SIM Unlock Code : 07595741
MCC+MNC :
IMEI (private) : XXXXXXXXXXXXXXX
Serial Number (private): XXXXXXXXXXXXXXX
MAC Address (private) : XXXXXXXXXXXXXXX
Please help me!!!
hspl doesn't allow you to flash a rom containing spl.
Rename rom as Elf0img.nbh and start your phone from bootloader to flas it from sd or use haret to unlock and flash your phone
Thanks for the quick response but now the problem is not that i cant't flash the original rom, but that i can't downgrade my spl from 3.10 to the original one (i suppose it was 2.20.0002 or something similar).
I really don't now hot to downgrade!
I've done it!!!
I downgraded my elfin from HardSPL 3.10 to the original 2.20.000!!!
I made an update packet using the original SPL 2.20.000 downloaded from the xda wiki.
I attach it to this post if anyone will need to downgrade his Elfin from HardSPL to the original SPL 2.20.000.
miky6682 said:
hspl doesn't allow you to flash a rom containing spl.
Rename rom as Elf0img.nbh and start your phone from bootloader to flas it from sd or use haret to unlock and flash your phone
Click to expand...
Click to collapse
can u explain that better, please
i instaled a rom from other site, mega rom 2, and now it is allways restarting and i only have usb conection for a few seconds not enough time to fla**** with anoter rom.
how can i solve this problem?
solved: i get into bootloader, by pressing Camera button + Power On ...and its back to life
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.