Heeeeeeeeeelp Neeeed. about Imate JAMin - JAMin, XDA Neo, S200 General

i have I-mate JAMin
-----------------
IPL - 2.20
SPl - 2.13.0000
GSM -01.14.20
---------
When i on the phone .phone gon usb MODE. not going ok mode and only show usb mode.
so how can upgrade or downgrad this phone.
plzzzz solvetion want.

plz any one sovlution about this?

Install a original WM5 Rom and read hera about bootloader and hardspl or softspl. Here are so many treads about your problem.

Related

Wizard is dead ! help!

Hello everybody.
After i flashed the Radio ROM 2.69.11 to my Wizard..
Its broken, freezes on bootup and wont run.
the screen shows the following:
IPL: 0.3
SPL 1.03
OS 1.3.1.13
--------------------
How do i fix this problem?
Thanks
//Daniel ..
IPL 0.3? What did you loaded into it...
The Radio ROM may be too new for your IPL version...
If warranty is not important, Go to the Wizard Upgrade section and read the stickies, use Button's 1.05 ROM to unlock, then upgrade a newer IPL and SPL.
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
latii said:
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
Click to expand...
Click to collapse
Put it into bootloader, then flash from there.
Bootloader is.. Power + camera button.. right?
I got red/green/blue/ screen now.. with IPL 1.03 and SPL 1.03..
Connection USB and start the .exe file? (from buttons).
//Daniel
Wizard Works Again!!
Big Thankss To Alll !
Really Appriciate..
//daniel

What should i do??

Ok here is the "Thing"
i put a hermes ROM on Elf (soft black) and i think the SPL and IPL has changed
its now:
IPL 1.17.0002 ,is it right ?
SPL 1.17.0000, is it right?
and i tried to download the Offical HTC elf Rom but after 2% it restart and write ID Vendor ERROR
what should i do?
P.S:i tried to do SuperCID but it need The ActiveSync Progoram to be ON, im stuck on bootloader Screen
MKR

spv M650 dead after upgrade

I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen)so i reset my spv but still the same.
ipl 1.84.0001
SPL 1.84.0000
GSM 02.67.90
OS 1.28.0.0
PLZ HELP
THX
go to bootloader mode, download and flash official ROM for your device.
It is not dead, dont worry!
but before that please write your upgrade procedure, did you CID unlock device, which ROM U used....

[q] stuck in bootloader. Help needed.

have a HTC Athena x7500.
Im stuck in bootloader.
Wend I power on the device it goes directly to bootloader and
the screen say :
ET \ Njq
IPL - v1.00
ET \ Njq
SPL- v1.20. Olipro
USB( wend is connect )
serial ( wend is unconnect )
I dont remember what it was befor I try to flash a WM 6.5 rom on it.
It as a WM 6.1 in Portuguese Rom befor my attent.
I cannot power off the device by pressing the button but have to take
the battery.
I already try to change the rom, the SPl and put everything inside just
to try to move from were I am but no results.
Began to update but ends or in 1% or in 7% and loose the connection.
The device connects to the PC but in PC in WM device center nothing happens.
I try Win7 and also XP.
I went to HTC site to download the official portuguese ROM but there are no
ROM to download.
So I´m dead on the water.
I will apreciate very much any kind of input that take me out
of were I´m now.
I´m not a expert as you already notice.Please keep it simple.
Thank you
stuck in bootloader. Help needed.
stuck in bootloader. Help needed.
have a HTC Athena x7500.
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl spstuck in bootloader. Help needed.l is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
J have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is vrait or name
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
sorry for my bad Englis
thank you in advance
My email: [email protected]

found spl v1.10 dowload Spl before v3.05 is not allowed!htc x7500

stuck in bootloader. Help needed.
I have a HTC Athena x7500.
accidentally upgraded my htc x7500 WITH SSPL-Manual-x7510.zip of HTC X7510
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10.0000
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is sure or not
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
I board on my pda (cid locked)on the Spanish language HTC_304
sorry for my bad Englis
thank you in advance
My email: [email protected]
help me plaise
is that the bootloader command Herme (mtty) could walk on Advantage X7500
i had this problem and what i did to remedy it was, take out the battery, take out the sim card and the sdcard. replace the battery and turn on the device.
once it is in the bootloader plug in usb cable and make sure the bootloader shows usb at the bottom.
then try to load any rom that is for spl 3.0. they should load and get it out of the bootloader mode.
Once you have it working again then be sure and flash the proper spl of the rom that you are wanting before you flash the rom.
i tried the wrapper and hardspl as well until i just tried the above example on a whim and it worked. I hope it works for you.
CE
thank you for your answer
I board on my pda (cid locked)on the Spanish language HTC_304
Can you explain how you did
thanks
Was there any solution to this problem, I have the same problem?
is what you got the official rom spain

Categories

Resources