Database Users

Country ID ERROR 120 When upgrading to WM2005

hey guys....
when i try to upgrade to wm2005 from wm2003se i get country id error.....GOT XDA II .....ive tried to go to bootloader mode and then run upgrade process but same results...?? any help ??? downloaded wm2005 from http://www.xoditech.com/wm2005_.zip and patched it with the patch1.exe available on this forum....tried without patching tooo same result HELP NEEDED ASAP....
thanks
jeetz

first do a full backup to your device the hard reset the device or use the file downthere to clear jumber the Bootloader screen should appear ... then start flashing the new wm2005 flash ... and good luck

did that mate.......same probz ? ERROR 120 : Country Id Error (1-1-8-N-N)
any other suggestions ??? plz need help to switch to 2005
also i am stuck in bootloader mode how do i get out of that ???
thanks for the help
jeetz......

try xda2nbftool or new er2003edit - open all nbfs and save it with new (same) operator and flash. that works fine 8)

.::Richmond::. said:
try xda2nbftool or new er2003edit - open all nbfs and save it with new (same) operator and flash. that works fine 8)
Click to expand...
Click to collapse
thanks for the help......forgot to update this thread .....thanks for updating it.....did that few days back and it worked....
thanks....

"Not digitally signed wuth trusted certificate"

Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.

try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.

baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....

sorry, i havent come accross anything else at the moment. if i do i will post.

l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !

If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...

Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance

the file is on my post above and still downloads without any problems!

do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file

How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help

Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch

Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?

Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170

baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3

fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done

SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL

Please help

im trying to install the new lvsw rom and i'm getting the an error message ''RUUWRAPPER.EXE APPLICATION ERROR'' can someone tell how to make this work

Do you have .net 2.0 installed? If so, have you tried redownloading the file?

gemini7866 said:
im trying to install the new lvsw rom and i'm getting the an error message ''RUUWRAPPER.EXE APPLICATION ERROR'' can someone tell how to make this work
Click to expand...
Click to collapse
see the guide for upgrading to LVSW. This will talk your through it. Read it through word for word and you will be fine.

CRC Error
trying to download the RUUWrapper but when i try to unzip it
it says CRC Error
plzzz help

Strange error after first BOOT

Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus

There are a couple of things you can do:
- Manually try to install it using the file explorer: \Windows\OpenCZ_Settings_Topac.CAB
- Make a hard-reset (hold Vol-up & Vol-Down and press the reset button under the battery case to see if it happens again.

Thx for swift reply ...
- I tried several hard resets and booting with / without SIM and or microSD - still the same error
- I managed to get the phone partially working, because you can move the error window aside and access the startmenu and open explorer. I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Unfortunately I can not access the phone via USB (first customisation hasnt finished and active sync does not open) and I'm afraid flashing the device with another ROM because of warranty
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...

well if you get this error even after a hardreset, you should definitely send it back..

OliveJeans said:
well if you get this error even after a hardreset, you should definitely send it back..
Click to expand...
Click to collapse
I will ... but any idea how to lower phones security?

pylorus said:
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
Click to expand...
Click to collapse
My device from Czech too. I found this cab file in Windows folder, if you need it i'll upload it for you.

pylorus said:
Thx for swift reply ...
I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
Click to expand...
Click to collapse
Try sdkcert. That should do what you want install it before installing your .cab what is needed

Problem solved - i sent the device back and the whole board was replaced - new IMEI, but now its working like a charm

for the future..I have had a same problem with my TD2..After few hours I found out that I could this error off in taskmanager. Then it worked.. It was just some czech layout for my topaz but I did not want it either.. So for those who will buy TD2 with this error and don´t want chzech langugage on it, just close it in taskmanager..

[Q] can not Install *.jar files

Hey guys, I updated my Rom to Miri WM6.5 which can be found at
HTCPedia
/miri_wm21892_manila25_nomessaging_v21_1/soft/htc-blackstone-rom.html?c_page=5#comments ( I can not write the link because the system does not allow me)
but I have some problems with it. Firstly, when I try to install a java application, I get an error says " There is no application associated with "opera-mini-5.1.21051-advanced-en". Run the application first, then open the application".
What can I do to get over this problem ?
And secondly, How can I change the folder of an application ?
The last two comments are mine at that thread but I get no answer, so I decided to ask it more experienced guys
Thank you for your help =))

Seems like no one knows..

For Java applications you must install midlet manager (Jbed or Jblend) first.

Knuckled said:
Hey guys, I updated my Rom to Miri WM6.5 which can be found at
HTCPedia
/miri_wm21892_manila25_nomessaging_v21_1/soft/htc-blackstone-rom.html?c_page=5#comments ( I can not write the link because the system does not allow me)
but I have some problems with it. Firstly, when I try to install a java application, I get an error says " There is no application associated with "opera-mini-5.1.21051-advanced-en". Run the application first, then open the application".
What can I do to get over this problem ?
And secondly, How can I change the folder of an application ?
The last two comments are mine at that thread but I get no answer, so I decided to ask it more experienced guys
Thank you for your help =))
Click to expand...
Click to collapse
use this to instal Jar file

Thank you