Related
:x i have been trying to get the bluetooth sync to work to no avail. i am using a 3com bluetooth usb adapter on my pc and card on my notebook. i am having problems with both when i try to synchronise. i can see my i-mate has been discovered and bonded; i can send files too. but i cannot synchronise. either there is a bug in the PDA software, or its really hard (needs a rocket scientist) to use!!! either way its dissappointing. can anyone help?
by the way my nokia and ericsson phones sync fine with my current setup.
I have the same problem using a toshiba portege 4010 with bluetooth built in, it works with my Nokia but not with the XDA i am using aytivesync 3.7.1
I would also like some help or ideas please
Thanks
John
Got bluetooth to work once
I got bluetooth to work only once using a Billionton USB Bluetooth adapter. The software is neat, but requires so much messing around with to get the PDA to actually synchronise in bluetooth mode. Unfortunately, I could not get it to work again. Should have documented what I did the first time.
After trying lots of times, it works. I sycronised a XDA2 in bluetooth mode.
There are a few important things
1. You first have to sychronise the XDA2 in USB Cradle to build a standard-partnership between desktop pc and XDA2.
2.remove the XDA2 from the Cradle.
3.look which com-port your bluetooth serial port is using
4.take these settings over to the active sync settings (must be exactly the same com port)
5. pair the two devices
6.start active sync on the XDA2 and sychronise via bluetooth
It works.....
i made a better description with screenshots (in german) but i don't know how to post it.
I use a toshiba laptop with bluetooth built in, but when i scan the available bluetooth things in the XDA 2 it only finds "voice gateway" and "SSA" or something like that, there is no serial port listed, when i scan a phone (nokia) it finds "dun" "serial port" "fax" etc etc.
So i cant connect my XDA2 as the only profiles it seems to have are Voice gateway and some SSA thing, so as there is no serial port listed i cant use activesync, i have bonded with both the voice and SSA thing to com ports from 5 to 9 and get a connection, but as its not a serial port it will not work with activesync.
Sorry for my terrible description of the problem, but if yours works i am sur e it will make sence to you
Thanks
John
Your right ! The XDA2 provides no serial port profile to my Bluetooth stick too. And thats why the Bluetooth GPS Receiver doesn't work.
I know this sounds strange, but with Active Sync Bluetooth definitely works.
Yes I finally got it to work a couple of days ago with a certain type of bluetooth usb adapter and software. All I can say, is that bluetooth is not very user friendly!!!! Activesync should have it show up just as it shows "infrared" in the connection settings. This will make it very easy to select it. In this day and age, you cannot expect a technology to be successful from mass usage if it is not totally idiot proof. BLUETOOTH is not.... WIFI will rule!!!!
Hi so have you bonded to the "ssa" profile, and then what ever com port you used you then changed activesync to use this port and it then works, because i tried this and it done not work.
I also have a tomtom bluetooth that a friend is borrowing, but by the looks of it there is no point in getting it back as if there is no serial port on the available using bluetooth that will not work either
Thanks
John
try this link. it may help u set up your bluetooth with active sync - http://www.bluetoothnews.com/features/ActiveSync.htm
@applecom
No. You just have to pair the Devices. Don't connect to any Profile.
Pair them and then start Active Sync from the XDA 2 and connect with bluetooth.
activesync and bluetooth with xda II
start > settings > system > bluetooth settings > Activesync over blutooth (START)
Nutty but there you go.
XDA II Bluetooth ActiveSync
I noted if you add or change the registry will work even better :
\HLKM\SOFT\Microsoft\Bluetooth\Activesync
IsBTASsetup from 0 to 1
Hi
I have changed the registry like you said, But how dose it work better, the only problems i have are when i ask activesync on the XDA to connect over BT it oftern trys and says port in use, i just retry a few times and it works. After doing the reg edit it did connect first time, but is this what you ment by "its works better"
Thanks
John
As this my first ever post, I don't want to come over as smug, but I took delivery of my XDA 2 today and it synced using bluetooth after about 25 minutes of 'messing'!
All I did was delete all the bonding between the PC and the XDA and told it to sync via bluetooth, initiating from the XDA, I thought that it had failed...but then the XDA sprang to life and 'Bob was my uncle'!!
Very impressed with my XDA 2, having used an XDA for about 8 months.
Andy.
Bluetooth Sync
What I meant was it has become easier to get XDA II sync via bluetooth. Please note that you have to unpair your PC first then change the registry and pair again. If your PC's Bluetooth dongle support Headset profile ( I used anycom USB220 which has this profile) you will see your XDA II asking you if you want Headset profile added and Activesync screen for bluetooth appeared as well. Changing the registry will always make the sync work is what i noted. Seems like XDA II Bluetooth supports many profile just that dont know how to make it works.
Bluetooth Activesync problems
I'm on the verge of giving up on this! Think I should stick to USB sync...here goes...
I've tried the tricks mentioned in the forum to try to get my XDA II to sync via bluetooth with my Sony VAIO laptop (it has built-in bluetooth). I can get the two devices to bond (I enter the PIN number on both the laptop and XDA and it succeeds) but then I try to run the Bluetooth Activesync setup (in Settings-->Bluetooth Settings on the XDA) I get an error message every time that says "Please bond with other Bluetooth device which supports serial port or Activesync profile as your Activesync partner!"
I thought I already HAD bonded the devices? Any ideas?
Cheers
Carlton
Finally sorted it out. Delete the partnership that you already have. Start from start>settings>system>Bluetooth Settings. When you clik start, then pair your device again. After the pairing, you will get the message that Bluetooth Active Sync is now ready.
Still no joy
Thanks for your help Merc.
I tried doing exactly what you suggested but still doesn't work. This is what happens:
I deleted the existing bond on both XDA II and PC.
I went to start>settings>system>Bluetooth Settings and clicked on Start. This gave me the message "Please bond with other Bluetooth device which supports serial port or Activesync profile as your Activesync partner!" like before, then automatically opened the Bluetooth connections control panel in the "Mode" pane. I chose 'Discoverable' and clicked OK. I then went to my PC and used the Wireless Link control panel and clicked 'Add' (to run Bluetooth connection wizard) which searched for devices. It found my XDA II and I entered the passkey on both XDAII and PC (same passkey on each).
The Bluetooth connection wizard then told me that the XDAII was offering DUN (dial up networking) services. I selected this and then clicked next. Was I supposed to select this (actually, it made no difference when I tried again without selecting!).
The wizard completed and both the PC and XDAII notified me that the bond was successful. I then waited and waited for something else to 'happen' (like a message to say that Bluetooth Active Sync is now ready.) but nothing happened. I gave it a couple of minutes.
I went to Activesync on the XDA and tried the 'connct with Bluetooth' just in case it had worked, but nothing happened. I went to Activesync on the PC and tried using a different COM port for infrared/serial links (as I assume this is what bluetooth uses) but no joy. I only had COM3 and COM4 showing in the connection settings in activesync, which surprised me as I thought there would be more.
That's it. I tried 3 times but still no luck. Any other ideas are greatly appreciated!
Cheers
Carlton
The
Your procedure is just like mine. But I used "On" and discovered the PC from the PDA. Do not use "Discoverable". Let me hear if you have any luck
The only way I have got it to work is assigning the bluetooth serial port to COM 6. Then set Activesync on the desktop to COM 6.
Any other COM port just won't work. Anybody else got it working on a different bluetooth COM port?
xdaguru
Hi,
I've got problems tu configure my MDA2 to use ActiveSync via bluetooth.
Is somewhere a step-by-step instruction or can someone tell me, wich steps a necessary to establish this connenction ??
After I upgraded the rom and after about 20 hours trying, I was able to synchronize via bluetooth. Yesterday, I have to reset my device (complete) and installed everything again...but now, I'm not be able to get activesync via bluetooth working...
please help...
rob.
I was having difficulties as well. I wanted to Sync using Bluetooth because that way I can leave the unit in the leather case and just plug in a charge cable instead of cradling it.
I did the following:
In 'Settings/System/Bluetooth Settings' I pressed the start button underneath "Bluetooth ActiveSync Setup". I then paired with my PC. Then I could start ActiveSync on the device, and by selecting 'Tools/Connect via Bluetooth' it would connect. By setting it to not release the connect after it's done synchonising, I can even network over it.
However, after going to sleep and waking back up the connection is gone. Reconnecting won't work because something in the XDA still thinks it's connected, so it needs a soft-reset before connecting again.
This is on a device with ROM 1.52 though, will test on 1.60 later on. It's a pain that just pressing 'Sync' will not work, and that you have to manually select the option from the tools menu.
I'm not even able to start the connection to my PC.
When I use ActiveSync and say "Connect via Bluetooth" on the O2, it does nothing.
I'm able to use bluetooth to exchange files and that's barely all.
I have an ActiveSync profile in my bluetooth manager on the PC (WidCOMM stack) and can affect a COM Port but that's all...
Can anyone help ?
Hi,
@ Peter Poelman,
thankf for your reply. The way you described is exactly what I have done the last 2 days (about 500 times :shock: )
Now I know, where the problem was. I had the same behaviour like Murcielago. AciveSync did'd do anything, when I tryed to connect via bluetooth (of course, tha PDA and the PC were paired).
I remeber, as I set up the connection the first time (some weeks ago as it works), after pairing the device with the PC I got a messagebox on the PDA , which said that ActiveSync-Setup is now finished (or configured or something like that). I didn't get that yesterday.
I had installed a Bluetooth-GPS-Serial-Driver (from Towa) and it seems, that this one made the trouble. After I had removed the driver, the connection works great again. It seems, that removing the GPS-Driver is only necessary for the first setup of the connection...after the connection was made, I have installed the GPS-Driver again and now both works...
thanks a lot
rob.
I uninstalled the Towa patch this morning but nothing changes.
It's as if pressing Connect via bluetooth doesn't even answer.
When I try, connect via IR, I get a box telling me "Connecting to host".... but nothing like this with Connect via Bluetooth.
I really don't understand that ****ing bluetooth. It's not a intuitive technology.
I bought a WiFi module for my PC and I'll receive it today. I think I won't have to bother with that crazy bluetooth anymore.
The Towa patch is the culprit. It is not enough to uninstall it. You have to hard reset your device to really undo whatever it does. I had the same problems you describe. After a cold boot, I could successfully initiate the bluetooth active sync and I could then install the patch which worked and allowed the bluetooth sync (if the activesync cluetooth bond was created before installing the Towa patch). Now, however, I upgraded to the 1.60 ROM which fixes the bluetooth serial driver issue and no longer needs the Towa patch.
After all that work, I generally still sync in the cradle, because I like to charge the battery in the cradle. Go figure.
Panabax
hi,
I've the same problem,
when I try to connect trough bt I recive a popup saying "status: connecting to host".
I've an xda II with rom v. 1.52.00wwe and BT fix by towa.
Is anyone so gentle to send me (or post a link) the widcomm stack?
[email protected]
I hope it could resolve the problem.
thank you so much,
rubenio.
WOAAA TOWA
His last version of the bluetooth patch is incredible and activesync via bluetooth worked in less time then it took me to install the patch.
I now have ActiveSync via bluetooth and internet access via activesync.
Take it there : http://bluetooth.i-networx.de/index_e.html
I think he really did a tremendous job and the rest is coming (network access, etc...)
Can't get Bluetooth and Active Sync to work (1.60 ROM)
Hi !
I've also upgraded my device with the new 1.60 ROM, but I'cant get Bluetooth to work with active sync.
I've selected the "Inbound COM port 4" under Bluetooth Settings. After the device is bonded and I search for services my Logitech bluetooth device display the COM 4 serial port. But when I try to connect it display the following error: Could not establish connection with the remote device. I think it maybe is my settings on the PC.
Hope for some guidance :wink:
Panabax said:
The Towa patch is the culprit. It is not enough to uninstall it. You have to hard reset your device to really undo whatever it does. I had the same problems you describe. After a cold boot, I could successfully initiate the bluetooth active sync and I could then install the patch which worked and allowed the bluetooth sync (if the activesync cluetooth bond was created before installing the Towa patch). Now, however, I upgraded to the 1.60 ROM which fixes the bluetooth serial driver issue and no longer needs the Towa patch.
After all that work, I generally still sync in the cradle, because I like to charge the battery in the cradle. Go figure.
Panabax
Click to expand...
Click to collapse
Hi,
I've recently found my Qstarz BT-880 bluetooth GPS receiver and would like to use it with my Vario 2. I have managed to achieve this in the past but for some reason cant get the phone to stay paired with the device.
If I setup a partnership, the GPS receiver connects as soon as I hit ok and then about 10 seconds later it disconnects; I cant then get it to connect again short of deleting the partnership and starting again.
I also cant remember how you just search for bluetooth devices which you can connect to (other than creating a partnership), is this possible?
Anyone seen behaviour like this before/have any tips they can offer as I'm at a loss?
Thanks.
Hi,
at first: i already did a hard reset... didnt help.
so to the topic: when i am syncing my device with active sync everything works fine. then i disable bluetooth on the touch dual.
after doing this, i cant enable it again, whether in the connection manager nor in the settings table for bluetooth. it spends 10-20 seconds with doing anything but then jumps back to "off". then i have to restart my touch dual and after that i can enable bluetooth normally --- till i sync the next time.
has anybody got a clue, why this is happening?
has anybody the same problem?
no ideas? anyone?
lastpush for today, its midnight now here in germany ;-)
good night
I too have a similar problem like yours all of a sudden I can no longer sync with bluetooth properly for some bizzare reasons it connects and it just hangs can't do anything i.e browse files or tranfer on dual however it works fine via USB but with bluetooth it has mind of it's own it just work now and then, sometimes I have to wait at 20 minutes for it to sync properly weird
Tried everything re-boot, re-paired the device, system restore, did hard reset on dual, re-installed WMDC 6.1 even to the point downgraded to WMDC 6.0 still now joy!!!
Can't fathom what's wrong!! it was working fine couple days ago did not install any new apps on my laptop and I have a Microsoft Bluetooth stack as it's well know that WMDC has issues with other bluetooth stacks i.e. toshiba, widcomm etc... this WMDC is driving me nuts!!!!
Any tips would be appreciated I'm almost giving up! getting used to the old fashioned USB sync.
Running Vista Ultimate if that helps!
i will get a new touch dual on saturday or monday next week. i then can tell you, if its a problem with the touch dual or with the pc you connect to..
but for testing you could try to send some big files over bluetooth from your touch dual to another bluetooth phone.
I've got some problems just with the Toshiba BT drivers on my laptop... it seems that the Serial Port Profile is not recognized as "Active sync" connection in the BT device manager on the Dual. I have to change the serial port in Active Sync on the laptop (to a wrong one), change again to the right port (com7) and then refresh the services for my laptop in the BT device manager on my phone. After that the sync works again...
I've tried with Microsoft BT drivers and it works fine ! Somethimes i have to stop BT on both pc and Dual, and start it again....dunno why...
I've reinstalled the Toshiba BT drivers because on my laptop with M$ drivers i can't able to shutdown the BT device... so i have to switch the com port and refresh the services everytime.... a little bit tricky but it works...
Regards,
Raid.
well but in my htc touch dual i cant swith bluetooth on after syncing *g*
i always have to soft reset
is there any registry trick or something i could try?
Bluetooth issues here, too!
Please advise if this is a known feature.
I only got my Touch Dual yesterday. So far seems a great device. However, I can not get it to turn on the bluetooth at all!
Everytime I try it says bluetooth error!
I can't pair with anything at all.
Many thanks for any help.
well now we are four people with the same problem...
I think we have to wait till the first rom update, or a custom rom...
I emailed HTC support - their suggestion is that I try a hard reset - not done yet.
If no luck with the reset then it might be an electronics issue! If so it will be a discussion with Orange to get fixed.
I will update you on progress...
Well, I can confirm, as expected that the Hard Reset did nothing at all!
A new phone is on its way to me apparently...!
i have same problem with you..i had hard reset but bluetooth still did'nt work...i had hardSPL, change radio and ROMs but the problem still exist...
Hello
unfortunatly the search didn't work for me to find a solution (maybe anybody can help me..)
i simply want to pair my Universal with my bluetooth gps receiver.
in settings/connections/bluetooth i added a new device.
it took a while, then it found my gps receiver and asked me for passkey. i used "1234" - but i am unsure, if that was the right key (i'm 80% sure..)
after that i got a new entry in the list of the avaible devices.
so far so good... BUT:
the gps receiver only appers as "disconnected". when i want to "connect" to it, it says "Your device did not connect with GP-700. The connection failed or the passcode is incorrect."
maybe the passcode is incorrect, ok. but i can't insert a new passkey, because it won't ask me for new entry after searching for new devices. i also can't delete the gps receiver entry.
I checked the box in "select services to use from this device. Serial Port". is that correct?
...hmmm it has to be so simple but i can't pair... gr......
please help me
nobody knows an answer...? ;((
hi, we maybe able to help but need more info as i would for sure. what rom are you using? and possibly what radio version? i use a bt gps with mine and passcode is 1234. not sure if thats the case for all though. depending on the rom im using mine shows as disconnected sometimes but i also have to create a valid com port to use with it. hope that helps.
Also what program are you using with you BT device? Mine pairs with '0000'.
If I use Route66, I don't even need to pair it.
When using iGo8, I do pair it.
When using Google Maps, I also need to add a COM port (I use 1 as some programs can't use 0 - eg, MemoryMaps).
Hey, thanks for answering my question.
i am using Tomal v8.90 (light). My radio version is (after unlocking) 0.00.00. Should i flash it back to 1.18? do i have disadvantages?
i wanted to use tomtom..
hope these information helps
I think there's your problem. I'd flash either 1.15 or 1.18 radio.
hm... anybody can help me..?
ThaMasterT said:
hm... anybody can help me..?
Click to expand...
Click to collapse
Flash an updated radio...1.15
i flashed to 1.15 succesfully.
i found out, that 1234 for my device is the right passkey.
i connected in connections/bluetooth to my device (like i wrote above) and it says "connection successful". after that my device is listed under "disconnected" again. furthermore i can't connect to it, when i click on "connect" in the settings. i can't connect to it in tomtom, too...
when i click on the device (listed under connection-settings in "disconnected") the partnership settings will be displayed. here i can select services to use from device. it provide me a list with one item to check: "serial port". but even if i check or if not, it wouldn't affect anything(?). i simply can't connect to my device...
hey,
i solved that problem. i choosed "the right" com port to use the receiver.
thats a little weird, cus i already choosed some random com ports before and it never worked for me. unfortunately i didn't get some useful error messages or something from tomtom or other programs. now i tried a different port again and suddenly it worked...
sorry for the trivial problem and thank you very much for helping me.
btw: the device is still listed as "disconnected" in settings. who the **** cares...
i have the tomtom gps mkii sirf III and i don't get it paired or manually connected either, but then, when i installed the tomtom software, i found out, that it does not need to be paired in the windows settings first. ok, you might say, this is a coincidence, because tomtom works fine with their own hardware, of course. but no! in my settings there is also an "external gps" point, and all you need to do is put in a proper port and speed and it'll work. the easiest test for that would be google maps. in the beginning i also worried about pairing and connecting, but i found that i didn't have to do that.