Database Users

do you use a screenprotector?

Do you use a screenprotector on your trinity? I do, one from Brando, but I don't like it and am thinking about removing it...
Is anyones screen already damaged?

Is it possible to put it perfectly at all ?! I mean I must be in a totaly sterile envoirement with gloves and special suit and God knows how and what skill I must have to put it right
My Trinity is one day old but I will surely remove it in a couple of days, can't look at it with this ugly bubbles beneath

The first thing I do when I get any new device is get a screen protector for it, and it goes on before I ever start using the device. I've gone through a lot of PDA's over time and one thing I can say is that you get better at putting on the protectors and you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
The best way to put the protector on is to carefully peel just a bit of one edge and line it up at the top of the screen. Then use the included card to slide the rest down the screen, the paper backing will peel off as you do this and it helps to prevent bubbles and dust getting on the stick side of the film.

If you don't like bubbles, try a brand that is not adhesive. Most people don't like the type that slips under the case but I do. I've been using NuShield protectors for a couple of years on 4 different PDAs and they are great IMO. I don't use a case (store in pocket) and NuShields are very durable - easily lasting 6 mo.

I'm using a brando ultraclear for K-Jam in my p3600... it works perfect... I haven't any sort of bubbles because i put it the first day i got my new device.. so device under it was very clean and the result is PERFECT

shoey5 said:
...you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
Click to expand...
Click to collapse
Completely agree!

I'm using Covertec Screenprotector(for S100), and it works like hell!
The screenprotector is about 1-1,5 mm thick, so it's pretty thick compared to many other brands, but the advantage is that it's almost impossible to get airbubbles, and the screenprotector is 110% clear! So you won't even see it's there!
Comes in a pack with two protectors, one with UV-filter, and one which is ultra-clear...
Can highly recomend them... No need for a "anti-bubble-wiper-thingy"

1.5mm thick?!?!?! That's thicker than a "anti-bubble-wiper-thingy". I have wetsuites that thick. You talking about a case or a screen protector?
LOL
No offense - just having fun. Some are actually quite thick in comparison.

Hehe! Well, ok; maybe it's a bit thinner... But it's about the thickness of a playing card, and just as stiff as one too...
And no, it's not a casing, or a wetsuit... Maybe a drysuit haha!

I use protector, but got 2 bubbles which I want to try to remove.
Can anyone tell me how to remove the protector without using anything thin and sharp?
Asbjørn

Tape. Take a 1-2 inch long piece of tape and press one end on a corner of the protector. Then pull

I can't get my screenprotector removed...not even with tape

Hate screen protectors. Don't use them. My nephew has a Jam which is years old and hasn't had a protector. NO screen scratches -- only a little dullness where the SIP keyboard is but that buffs out in seconds once a year using Displex. No scratches from keys even though it's subject to some abuse and the casing is scratched and dented. Thus I myself have no crap on my P3600's screen.

Im not a fan of cases or screen protectors, but I got 1 for my p3600. Its pretty good, I just wish it was about 2mm wider, since the left edge doesnt quite go till the very end of the screen which is annoying.

I got my screen protector from 'Javoedge.com' , it cost me about £8.50 but it is worth every penny.
It is cut to the exact size of the Trinity screen and fits really well. It is so thin that it slides beneath the White plastic case of my Trinity and the screen itself, so there are no edges of the screen protector to be seen.
I agree that you must take your time when installing it to try and get the edges straight, but when it's on it fits and looks great.
I opted for the super clear version and not the anti-glare version.
Great product!

Invisible shield from ShieldZone.com
I'm using an "Invisible Shield" from ShieldZone.com for my P3600. At the time I got mine, it didn't exist any pre-cut version for the P3600, so I ended up with a pre-cut TyTN shield, since they have the same screen size.
The first 2-3 days the result wasn't that good as I had some bubbles under the shield, but they disappeared after some days.
Watch the demo videos on ShieldZone.com, and I guess you will be as impressed as I'm with this shield.
-Bjørn

Hi people.
I am soon gonna be a happy owner of a Trinity and i will definately buy a screen protector for my device. Can you please give me your opinion on different brands you have tried?What brand would you recommend buying?
Thanks

I have a Brando one that they now market as a P3600 version.
It sticks to the screen with static so no glue or residue if you remove it. Also this means it is washable too. The static provides more than enough force to keep it on the screen. In fact it is stuck fast. Only by pulling a piece of tape stuck to it by both ends will remove it.
My only problem is more with screenprotectors in general. Since they add extra thickness to the screen they do affect the sensitivity of the touchscreen. So for a while you will write with the stylus and you wont be using enough force. You get used to it, but it would still be nicer to find a thinner membrane.

Mine is a Clear Touch Crystal from Boxwave. I've used Boxwave's products for years and found them to have very high durability and quality. The screen looks like it has nothing on it at all when the device is on. I find that it actually seems to improve touchscreen accuracy and feel.
The only problem I have had with screen protectors in general is that if they are cut too close to the borders of the screen, that is, if they fit too well, they seem to interfere with the screen's ability to detect taps. I think it is interfering with the digitizer. Every time I have installed a protector PERFECTLY leaving no gaps on any side, the screen stops responding until I remove the protector and reinstall it with the edges trimmed in about 1 mm on all sides. I don't think that you need to have all edges trimmed, but I do it for uniformity's sake.
Hope this helps someone who gets a protector and then thinks they broke their device by installing it like I did my first time.......ahhh to be young again.....

@olsenbjo
Does the Invisible Sheild cover the entire device, or just the screen?
Thanks!

How to remove scratches from your Trinity screen

(Not sure if there has been a post about this, apologies if there has.)
Just wanted to let everyone know that I had a fairly big scratched area, right where I write the letters for the Letter Recogniser SIP which was very annoying as it prevented the stylus from gliding smoothly. I heard that I should use Brasso (~£1.30 from your local supermarket) on the screen and it has been VERY successful. It's completely removed the scratch.
Just apply a small amount with a cotton-bud and work into the screen in circlular motion (press harder for deeper scratches). Keep doing this for about 10-15 times or until the scratch disappears.
Hope this helps anyone with screen scratches or anyone wondering about using Brasso but too scared to try.

Careful
I wouldn't recommend it as too much brasso will affect the screen, It's not just an abbrasive but solvent too so you will melt the plastic screen. Over-use will make the screen look warped.
I tried this on my M500 ages ago; now if HTC have improved on the screen then hey.. go ahead but don't say I didn't warn you.

Screen protectors are a much better option. If the screen is already marked a protector would give you a smooth finish again. If thats to expensive an option clear contact sheet will also offer the same results and a roll of that will give you screen covers for the rest of your natural life.

it would not "melt" the screen - how misguided. it is a mild solvent and abrasive and so is unlikely to cause much harm to the screen unless used constantly. screen protectors look awful on a screen - especially when the device is off.

http://www.mobilecomputermag.co.uk/2007100487/my-laptop-screen-is-scratched.html

Off topic a bit. I bought an expensive screen protector from Brando.. it works very well.. but.. for some reason it (the screen protector) got scratched. any easy way to solve it? Brasso is ok? I thought if there can be any method of using .. say car wax to fill in the grooves of the scratch.
I think it got scratched when stuff like sand got attached to my face and when I list to the phone, it stick onto the scren pctr.. and when I write on it.. it got scratched.

Just be happy you had the screen protector on!

I tried to take out the scratches from the plastic cover on my Casio watch with (Crest) toothpaste and it worked FANTASTIC!!!
Thanks a lot to the Guy who suggested this solution for PDA screens.

Damage to screen with brasso
rich1986 said:
it would not "melt" the screen - how misguided. it is a mild solvent and abrasive and so is unlikely to cause much harm to the screen unless used constantly. screen protectors look awful on a screen - especially when the device is off.
Click to expand...
Click to collapse
OK it doesn't melt the screen off but it gives it a warped look if you reflect light off it.

No tricks can help
Do not fool yourself. Brasso, toothpaste, Displex all leave marks on the screen. Check it with the device off in sunlight or a strong light source.
Brando protector is expensive.
Cheap and perfect is a new digitizer (USD 8).
I just ordered two more. And whenever I get a scratch and I have time I replace it.

hmmm... Brando's protector is selling for 9-10 dollars - you can easily find cheaper alternatives.
I guess the time and hassles (and of course the warranty alone) of replacing the actual digitizer don't really worth the few bucks saved.

Screen Protector - A Must?

How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?

I haven't ever used one, I find they make the screen less responsive. I do have a few scratches on my screen though but they are invisible when the screen is backlit...

GoldCoin said:
How many of you are using a screen protector?
I just can't install this damn thing without making bubbles between the screen
and the screen protector.
Tried putting invisible shield today which covers the entire device. it came with
some spray to avoid dust but i'm still not happy with it. on the back it's ok, but
the front shield was so ugly and unclear that made me to remove it and now
i'm with no front protector at all.
The screen is more clear now but i'm afraid to scratch it.
Does anyone know how to install the screen protector in a way which it will be
totally unnoticeable?
Click to expand...
Click to collapse
Your screen protector is a must as scratches can appear on your screen very easily without it.
As for the bubbles I've managed to get mine on with only a couple of bubbles around the speaker & 3G camera. Doesn't bother me to much any more
Try this thread as it has a number of recommendations on which is the best screen protector to use

Yes, the screen protector is a must!
Especially for a device with such a huge display. I have read here about cracked displays and I am sure that screen protectors give added resistance against cracking (besides their primary function against scratches).
It takes PATIENCE to apply one though. I wasted 2 before i managed to put one flawlessly (well almost)
Some of the protectors can be washed and re-applied.

Do you really think it has some impact on the way the screen respond ? Does the screen protector makes the bends more noticeable when you press on the center of the screen ?

I've used my Universal for over 3 years with no scrren protector, and there is a mark in the top right where the X icon is but no other issues. However the Universal is a clam shell design so the scrren is protected when it's in my pocket. I don't think I'd want to use the HD without one.
I couldn't fit the screen protector that came with the HD properly because it has to be done with microscopic precision. However I bought 6 protecoter for £3 on Ebay from Ecell and am very happy. They're much easier to fit because they're a fraction smaller, plus you can use a couple to practice with and still have spares left over.

I use the protector from day one and I can't imagine not using it. It's just too much of a risk, and by watching my used protectors, how they're covered with scratches, some of them quite big and quite deep. I would not want to have this permanently on my screen.
I have bought some additional protectors as well. I predict I will be changing protectors every 3 or 4 months.
I have no idea why everyone seems to have so much problems with applying them. It was very easy for me to apply both the stock protector and the Brando protector. Just clean the front screen as thoroughly as possible with a piece of cloth that does not leave those small fabric hairs. I used a cleaning cloth for glasses, and put a few drops of window cleaning fluid as well to remove eventual grease.
After that it was piece of cake. Started at the top and just rolled down the protector in one smooth move. Had 1 bubble, which I simply pushed to the edge of protector until it was gone.
I reccomend you do all of this in a dust-free environment. Bathroom is a good place, for example. Let the dust settle for like 20 minutes before going in. Avoid rooms which have carpets and such stuff.

I used mine for the first month+ without the screen protector and sustained no scratches. I have one on now simply because one day I was putting stuff away, saw the screen protector, put it to my HD and it went on perfectly without trying, so I decided to keep it on.

GoldCoin said:
How.....unnoticeable?
Click to expand...
Click to collapse
GoldCoin,
Have you tried buying on from a phone shop and asking them to install?
I installed mine as soon as I removed the "do not sit down with the HD in your pocket warning" Best way to ensure that the screen is clean. Took a couple of attemps to get it started but a little effort and I got it. Left with a small bubble round the ear piece and one top right, but that looks like a slight defect in the protector as the alignment looks almost perfect.
When installing, I peeled back a portion of the protector and aligned it best I could - incidentally, I placed the HD back in the foam that it came in to hold it firm. Without peeling any more off I try to gauge the alignment. If I think is good to go, I slowly peel the backing whilst rubbing my finger back and forth across the area just stuck down.
Here's another suggestion. PSP Screen Protector installation
Good Luck,

Yes, it's a must!
I use a screenprotector and it has lot's of scratches on it, which otherwise would be on the screen itself

Absolutely!
I Use clear-coat and are very satisfied (had it on my diamond as well and have it on my psp)
Once you get a mark on the display u will regret going without.

Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.

Bubbles are not problem. After installing screen protector just take you credit card. You can remove all bubbles with credit card.

Just adding my two pennies worth. I haven't ever used a screen protector on any of my previous phones. However Touch HD is a little bit special (as we know) so I invested. The one that came with was utter....well it was naff. I bought an invisible shield but some areas didn't dry and adhese correctly....so I opted for Exim...now this was awesome....a few attempts later and I have it installed with no bubbles at all using a credit card to apply.
(Top Tip: use selotape to remove any unwanted dirt from the screen before installing....the static tends to draw dust to it straight out of the packet....helped me anyway!)

GoldCoin said:
Thank you all for sharing your opinions. already ordered a Brando protector + 3 extra just in case i will mess things up again.
Following Rozenthal advice i think i'll apply it in the bathroom this time and not in my dusty workroom.
Click to expand...
Click to collapse
For what it's worth, it wouldn't hurt to use a can of dust remover or compressed air to spray the area before applying. Worked for me. Just a thought.

Does the normal screen protector that comes in the box makes the screen feels like bending when u press on it ? in the center specifically ? and makes you need to press harder when u tap ?

Invisible shield on mine and wouldn't be without a screen protector on any of my devices with my way of using them and pocketing them they tend to get scratched but loving the invisible shield. Should be installed at the factory imo

Jezwick said:
... I find they make the screen less responsive....
Click to expand...
Click to collapse
I've always used one, XDA mini, Kaiser and now the THD.
In all cases I've found the sensitivity is affected but to varying degrees.
In each case I've used tweaking tools to change the sensitivity back to acceptable levels.

But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?

Xeon said:
But im only concerned to know. Does makes the screen feels like bending when u press on it ? I already know that all resistive screens do what i am talking about but does it increase when using a protector ?
Click to expand...
Click to collapse
I haven't experienced this with the Exim protector I am using. In fact...it's as though there is nothing there....even when swiping!

Glass screen with/without a screen protector

As you know the Hero has a special coating on the screen, and through the first few days of use i found it awesome. Finger prints are never really much or a problem. But being afraid that the glass screen might get scratched i put on a screen protector but now sensitivity seems a little ( tiny ) bit less & the fingerprints are quite horrible. So just wondering who here uses it without the protector & does is scratch easily ? Comments welcomed

you do not need a screen protector for glass screen phones, such as the Hero or iPhone. My Hero has been getting a rough treatment for about 4 months now and not a scratch to be seen.

I got one from boxwave.com (Anti glare one)
http://www.boxwave.com/accessories/htc-hero-screen-protectors_3636.htm
It helps with smudges as well.

What screen coating are you talking about? White Hero has teflon coating on the casing which has nothing to do with screen, I believe.
I am not sure that Hero actually has got a glass screen. If so, I think that screen protector is just pointless.
If it actually has got a plastic screen, I would not ruine my phone with screen protectors. Phones are meant for us to use.

What screen coating are you talking about? White Hero has teflon coating on the casing which has nothing to do with screen, I believe.
I am not sure that Hero actually has got a glass screen. If so, I think that screen protector is just pointless.
If it actually has got a plastic screen, I would not ruine my phone with screen protectors. Phones are meant for us to use.
Anyway, a screen with very minor scratches is not only more sensitive than a screen with protector, but better looking too. Bigger scratches, well, a protector won't protect from those.

imo a screen protector is pointless...ive been treating my hero rly badly and theres not even a tiny scratch...i can even fall drunk on the road with ur hero in hand and it doesnt break (tested)

pauliusba said:
What screen coating are you talking about? White Hero has teflon coating on the casing which has nothing to do with screen, I believe.
I am not sure that Hero actually has got a glass screen. If so, I think that screen protector is just pointless.
If it actually has got a plastic screen, I would not ruine my phone with screen protectors. Phones are meant for us to use.
Anyway, a screen with very minor scratches is not only more sensitive than a screen with protector, but better looking too. Bigger scratches, well, a protector won't protect from those.
Click to expand...
Click to collapse
theres an anti-fingerprint coating on the hero. Makes smudges harder to get on it and makes it very easy to clean it of. Thanks for the comment btw

heyodee said:
I got one from boxwave.com (Anti glare one)
http://www.boxwave.com/accessories/htc-hero-screen-protectors_3636.htm
It helps with smudges as well.
Click to expand...
Click to collapse
i tried it before but didn't like how it detorriate the brilliance of the screen.

I was gonna get a screen protector for mine. But all they had at the time were the universal kind. And I knew better then to fall into that. But its been a week and not a scratch on it. I try not to put other objects in the same pocket and take notice when I'm doing something that may put the phone in danger. Making sure to remove it from harms way. But yeah... I don't think ill fall into the screen protector money pit with this phone. That's my opinion though. I spent a lot of cash on those things. Prolly enough that I could've just used my insurance and got a refurbished .

sdroid said:
theres an anti-fingerprint coating on the hero. Makes smudges harder to get on it and makes it very easy to clean it of. Thanks for the comment btw
Click to expand...
Click to collapse
Yup...more and more touchscreens are going to it!
http://en.wikipedia.org/wiki/Oleophobic

i have the white hero and about the screen, i thought there was a screen protector on it already when it came out of the box? doesnt it?
i tried peeling the corners a bit but not too much cuz i didnt want the corners to curl up and not stick anymore, and eventually it'll bug me and i'll have to rip the whole thing off (happened before) so i just left it alone and assumed theres a screen protector on the screen

thecodemonk said:
Yup...more and more touchscreens are going to it!
http://en.wikipedia.org/wiki/Oleophobic
Click to expand...
Click to collapse
how does everyone find this concept in practice? In the last few weeks the phobic part of it seems to be failing, or I need to wash my hands more often... just seems to be more dirty finger smudges hanging around until I give it a good wipe with a screen chamoise

streetdaddy said:
how does everyone find this concept in practice? In the last few weeks the phobic part of it seems to be failing, or I need to wash my hands more often... just seems to be more dirty finger smudges hanging around until I give it a good wipe with a screen chamoise
Click to expand...
Click to collapse
Oh the fingerprints will still show up but I just wipe it off with my hand (a firm swipe up the screen) and it's as good as new.
The idea is that the oils do sit on top, but they aren't sticking so you can just wipe them off again.

Yeah i always am able to see the fingerprints but a swift wipe and theyre gone. I also always find that when i bring the phone out of my pocket the screen is perfectly cleaned every time. I like it

Mine has a very small (5mm) scratch. No idea how it happened

I too have a small scratch, about 3mm, in the middle-upper-right. No big deal, but its there if you look for it. It's a white Hero, if it matters.

Those scratches, on the screen?!

I have a tiny scratch on my screen too! It's over the black part next to the branding though so it's not a problem. I purchased a screen protector after this happened though, just to be safe.

I use a screen protector on mine (and a gel case) and I haven't noticed any problems with it being less sensitive.
When I first got the phone (G2) before I put the protector on I noticed the screen looked rubbish because it had fingerprints all over it....
I'm happy to use a screen protector to protect against scratches.... I wouldn't risk without as I want this baby to stay pristine

I like naked gadgets.
To those who got scratches, what type of environment does your phone get exposed to? Keys and coins normally won't scratch hardened glass, but dirt with rocks and sand will.

Best Screen Protector For Xperia Play Nu-Clear

Okay I thought i'd make this quick thread to help you guys out. Some of you Xperia users don't realize Sony Preinstalls this screen protector or should i say "Shatter Glass" on all of their devices. Is this good? Simple answer, NOT. AT. ALL. When i took the shatter glass off i noticed an increase in brightness and the phone was more vibrant and so i order this Nu-Clear Screen protector off Amazon And it is the best screen protector I have ever had. It is so smooth and feels like its not even there and the phone is just as vibrant with it as it is without it. This screen protector only cost $3 with free shipping when you sign up for Prime on Amazon which i suggest you do because its free for a month and ou cn just cancel it before that.
Heres the link
amazon.com/gp/product/B005KGBCFG/ref=cm_cr_thx_view
To take off that preinstalled shatter glass i sugest ou use something thin and sharp because it's on there pretty damn good. I used a razor blade and started picking at the bottom left of the phone right by the back button and had it off in no time.
Now when installed the Nu-clear screen protector clean the phone with some windex and a paper napkin then wipe off the phone with the microfiber cleaning cloth and blow away all the dust. Then when applying a screen protector i suggest you peel it off just a little so you can align it up with the top of the phone. Once lined up start pulling back the tab little by little while pushing a card(credit card or whatever) to make sure no air bubbles pop up.
This video pretty much shows you what i mean.
youtube.com/watch?feature=player_embedded&v=euIPR-yTZrE
Hope i helped because that preinstalled shatter glass was just annoying and was a magnet for scratches!
This is totally irrelevent, but sign up to Jackthreads best site to buy hot brands at up to 80% off fully legit.
jackthreads.com/invite/dariusbrown2

So there is a layer that comes installed on the phone already? Nice to know I can remove it because I've scratched it up pretty good and I've only had the phone about two weeks. I haven't even really done anything to scratch it either, so I was actually a little upset when I started noticing them.
Sent from my R800x using XDA App

Be careful, if you remove that layer you need to put on some other sort of screen protector. If you don't you'll notice that if your hands are moist at all the touch screen won't work properly.
Sent from my R800a using XDA App

maybe its just me, but i got the impression by the OP, that it was more of a commercial for Nu-Clear, Amazon, and whatever that website is he mentioned at the bottom, more than anything else.... lol

Tergazzi said:
maybe its just me, but i got the impression by the OP, that it was more of a commercial for Nu-Clear, Amazon, and whatever that website is he mentioned at the bottom, more than anything else.... lol
Click to expand...
Click to collapse
Wow, my thoughts exactly

Price?
it is really cheap should i be concerned?

Yep, I smell a shill.

Lol The bottom was ah advertisement everything else is true that shatter glass just collects scratches and I had just took it off when I got this nu clear screen protector and I'd just thought id let Y'all know about ah good screen protector
Sent from my R800x using XDA App

I've used two types, the one that came with the otterbox encasement, which turned out horribly.. had a bubble within the screen protector almost immediately, but that could've been my fault, but i had to re apply it several times, which only seemed to multiply the air trapped between the screen and protector. And I used the standard AT&T screen protectors, which are amazing, they're thick, anti smudge, clear, and since they're pretty thick, they don't bubble at all, really easy to apply too. but it's like 16 bucks for 2.
.. and i just realized that op might just be advertising.

me too man, i smell a salesman.. hehe
I bought the phone and shop gave me a cheap screen protector... now I have smudges of fingerprints all over (oily hands).. but then, still better than naked.
Guess I'll change to matte (anti-fingerprint) type after this. Anyone using matte? Is it good on xplay?

It comes with a protector on it, there really is no need to replace it. My screen is perfectly bright with it on. I clean my screen off a few times a day with a little cloth, looks brand new after every wiping. (im also SUPER careful with my phone, and I hate fingerprints, OCD)

It isn't even a screen protector it's ah shatter glass
Sent from my R800x using XDA App

Just want to clarify that :>>>> the touch screen is whether made of Glass or Plastic? In case of Glass, it's no need to add a screen protector and remove the pre-install screen protector can improve the screen quality and touch response.
Pls advise.

Good screen protector
I purchased a pair and its fantastic so far. Instillation is a bit of a problem if you are impatient like me.
I recommend, its cheap and reliable. plus you get 2 for the low price of 3 bucks

vincentbingkau said:
Just want to clarify that :>>>> the touch screen is whether made of Glass or Plastic? In case of Glass, it's no need to add a screen protector and remove the pre-install screen protector can improve the screen quality and touch response.
Pls advise.
Click to expand...
Click to collapse
It's a glass screen, but not gorilla glass like on the iPhone. Hence the pre-installed shatterproof film