rooted rc33 back to complete factory - G1 General

1.. yes I've googled it. I've been searching for the last 3 hrs and trying different builds with no success. (or I'm missing something)
2. My request. I went with rc33 from jf a while ago. For my own non-senseical reasons I want to revert my phone to straight up factory (boot loader and all). How in simple terms do I make this happen? I went back to rc29 hoping that OTA update would take care of it but the OTA option isn't there. What am I missing?

You first have to update from rc 29 to rc 30... search google and there is a update for it... then you need to update from rc30 to rc33.. also can be found from da goog

You can download the offical RC33 Update online somewhere, also, I'm pretty sure the standard bootloader could be found somewhere on this forum.

Related

Cannot update firmware on stock Sprint Hero

Please help out my coworker has a stock Hero on sprint and we are unable to update the firmware. I was able to update mine, our demo and one other co-worker's phone but on hers, every time I actually go into the firmware update it states no updates available. Sadly we work for a sprint store and hers is the only one giving us an error. I've already gone to the point of wiping the device to restore to factory but with no avail. Aside from having her swap out the phone at our repair center, I wanted to see if anyone has had the same problem and was able to get passed it. I saw a couple of posts stating to use the RUU utility, but on a stock rom that we already "RTN'd" I don't know how that would help. Any help would be greatly appreciated.
I've seen something similar. A coworker of mine just got a hero last week (after the MR release) and her phone shows the older software version but it will not recognize a firmware update is needed. I checked the phone's awake time and it was low, indicating the messaging app was not keeping the phone awake or draining the battery so I assumed it must not need the MR update even though it shows the old software version.
A couple others have metioned this... For some reason, some phones shipped with older firmware, version 1.22.651.1 instead of 1.29.651.1. Doing a hard reset on the 1.22 version wouldn't help, but updating the firmware to the 1.29 should. After that, check for the official MR.
You can find the file over here:
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
http://forum.xda-developers.com/showthread.php?t=559622
the guy at the sprint store (3rd party store) where i got mine from , his hero will not update or even flash back to the stock sprint ruu everytime it downloads the update and goes to apply it it shuts the phone down and thats it no reboot have to pull the batt to get it to power back on again
I had the same problem. I got my Hero on the first day it came out. Every time I tried to download the firmware update it would say no update available. Took it to the Sprint store and no luck either. They finally swapped out my original Hero for a new one and I was past my 30 days.

2.1-update1

Does "2.1-update1" mean I have the recent OTA update?
ECLAIR.UVJI6 under "Build Number" means you have the latest version.
Vibrant came stock with 2.1-update1 and the latest update doesn't change that. Your build and baseband will both end in JI6
Hm, I had a firmware update available last night and I ran it but it "bricked" my phone. I spent all day learning how to get back to stock. I finally fixed my phone, but when I went back to run the update again I get "No firmware."
The same way you got back to stock can get you to the latest update. It's really easy, just make sure you are using Odin 1.3
Are you rooted right now?
No, since I got back to stock I haven't done anything besides redoing some of the old settings I had. Last time I rooted I used RyanZAs OCLF, but I had kind of decided being rooted (or something) was the reason the update broke my phone.
Just odin from my thread. Its the same as the OTA. Undo all your lagfixes and all BS. before trying to do it.
its all explained. Dont see a need for 30 threads on the same thing.

GS5 verizon 4.4.4 to rooted marshmallow

I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
bkenobi69 said:
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Try to dial *#0808# in the stock phone application.
You should see a menu with several options.
Select "MTP+ADB" under USB settings and press "OK".
Then you'll be able to connect your phone via MTP or ADB to your PC.
If there's no menu, then (assuming you're rooted) open a good file browser (ES, Root Explorer or something) and open the file /efs/carrier/HiddenMenu (it's a simple text file) and replace OFF with ON there.
Save the changes and reboot the phone.
Now the menu should be operational.
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
bkenobi69 said:
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
Click to expand...
Click to collapse
Currently root is impossible for MM on G900V CID11.
Impossible means you cannot gain it now, most likely it's forever.
There's no internet site which can help.
You must choose: root on LP or unrooted MM.
You must decide if you want a stock ROM or something (TW-based) else too.
It's a good idea to flash and use a stock firmware for the time while you're thinking.
Interesting... I guess I must have been reading things wrong because I thought I could go to MM with root. I'll try going to Lollipop then but first I'm going to just flash back to JB 4.4.4.
I downloaded 4.4.4 from Samsung and was going to write it with Odin, but it says FAIL when I try to flash. I suspect I just tripped Knox...
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I'll look around to find a guide, but if you have a suggestion, I'd certainly listen!
bkenobi69 said:
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means that you've upgraded your phone's firmware while experimenting.
Now you cannot directly flash 4.4.4 with Odin, you're limited to 5.0 (BOK3) and above.
Ok. I'll read the guides on the head of this list and see if I can find the right information.
FWIW, I was following the same how-to that most of the stickies point to and say is safe. I wonder how I got to a position that I'm in now when I did the same as recommended. Painiac's thread points to the same thing I did:
https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848
I think I may have tried to flash a MM stock rom though when it got into a boot loop. I suspect that would be the issue.
Bootloop is not a problem in this case.
Just reboot to the recovery and perform a factory reset from there.
The phone will boot but the first boot will take 10-15 min.
bkenobi69 said:
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Marshmallow can not be rooted on CID 11 devices. The Samsung drivers are found here: https://www.samsung.com/us/support/owners/product/galaxy-s5-verizon You can follow the 5.0 root guide here: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529 to downgrade to 5.0. If you want to downgrade past that to a version lower than 5.0, you will still have to follow that guide then follow the instructions here (I recommend you to follow the root guide for 5.0 above then skip steps 1 and 2 on this page): https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858 . You can find stock firmwares here: https://forum.xda-developers.com/showthread.php?t=2784880 (stock firmware, kernel, and modem files) and if you get bootlooped or bricked, just reflash the combination file from the root guide. If you want to root 4.4.4, follow the downgrade method using all of the NK2 files but the flash the NGC kernel, run through the setup, then use towelroot and flash the NK2 kernel after that. If you ever get stuck on the red Verizon screen, just pop the battery out and reboot.
That's about all anyone can do and a run down of everything.
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
bkenobi69 said:
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
Click to expand...
Click to collapse
Understandable, I can't believe it is 2018 and we still haven't invented a way to compress 1.7GB into 1.7MB archives to make life easy on low connections. How is battery life on 4.4.4 and which update of 4.4.4 are you on? I've been having an issue with my phone dropping a percent every 2 minutes on 5.0/6.0. It would be nice find a version to root along with excellent battery life.
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Ok, I tethered to my wife's phone and am burning her data (shhhh, don't tell her).
I grabbed all of the OC4 files, the PB1 rom, and lolliroot. I think I have everything I need so long as OC4 is a good place to end up.
bkenobi69 said:
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Click to expand...
Click to collapse
Here are some files (that I been hunting for about an hour for). Just gonna reference this for future use and anyone who comes across this thread. http://rootjunkysdl.com/files/?dir=Galaxy S5
Nice find!
I have the phone up and running on stock PB1 currently. I'm going to let it sit to see what the battery is like prior to rooting. While I haven't gotten it hooked back up to my account yet nor do I have it rooted, I feel pretty confident now that I'm on the right track. Thanks!
Just to finish out this topic, I have not successfully completed attaining root on 5.0. I flashed PB1 to the phone and then followed this guide for installing KingRoot:
https://androidforums.com/threads/root-question.1120150/
I got the lolliroot files from here:
https://www.androidfilehost.com/?fid=312968873555011514
Thanks to all who offered help!
Qyuck question... I've got my phone working well bow, but there's one issue with apps I'm not sure how to address. I want to use Verizon Visual Voicemail but I can't find it on the Play store. I disabled updates so I wouldn't get the marshmallow update and break root. but, with updates turned off, VVM won't get pushed. Any suggestions?

Downgrade question - possible upgrade upon restart?

Hey all,
I am very much willing to wipe my phone to do a downgrade.
I have the OP8 Pro, unrooted (never rooted/never unlocked bootloader).
The scenario I see is - I downgrade my phone to 10.15.13 (I have the INAA modell). I'm sure at some point the phone will check for an OTA.
My question - Is it all possible for the phone to upgrade itself if it restarts?
Meaning, is there a time limit that the update is sitting in the queue waiting for the user to press reboot to install? Or can I just somehow figure out a way to silence the system notification of an update pending?
Not sure if that makes sense but my hope is to just go back to 10 and enjoy certain things that just worked out better for me unrooted vs 11 unrooted until some things are ironed out.
Thanks for your time.
No you would need to initialise the upgrade, unless you have automatic updates on.
You would have seen the initial installation begin.
Least that's my experience of it. The update is stored on the phone so you may also be able to delete it.
Turn off automatically download updates.
I downgraded using the special firmware I found (couldn't find official to do it ) and then installed the official EU/UK firmware straight after with no problem
dladz said:
No you would need to initialise the upgrade, unless you have automatic updates on.
You would have seen the initial installation begin.
Least that's my experience of it. The update is stored on the phone so you may also be able to delete it.
Turn off automatically download updates.
Click to expand...
Click to collapse
Thanks for that, much appreciated
Shipoftheline said:
I downgraded using the special firmware I found (couldn't find official to do it ) and then installed the official EU/UK firmware straight after with no problem
Click to expand...
Click to collapse
Nice - noted. I think I can start my search as well. Looking to do this tonight.

Need help unbricking a Zenfone 3 ZE552KL. Is there a full system image that I can flash?

So a few months ago i tried unlocking and rooting my old zenfone 3, it failed horribly and now I'm left with a bricked device. Because its been a while I don't fully remember all the details, but I think I might have corrupted some part of the system and then did a full wipe/format which left me with nothing, at this point i might have found a system image with the very first firmware version and when i tried installing the latest firmware update from the Asus website, I realized that I would need to start flashing from the very first update to the final update. I tried looking for custom firmwares and they also needed an up to date original firmware.
And now i need to use the phone again but still can't figure it out, the phone is now just stuck on a bootloop. I don't really know what to do anymore. One thing I keep thinking is if there is a full system image of the up to date stock firmware, an image file that i could just flash onto the phone and have it running again. Though I haven't seen anything like that, so I don't think that exists or will work with this phone
Can someone please help me? this phone has been a brick for months and now I need some help recovering it
TL;DR Wiped the entire phone, lost the android system, and now I don't think I can use the phone unless I manually update the phone from the very first update to the last. I'm looking for if a full stock system image/backup with the latest (or atleast new-ish) version exists, though I'm very doubtful that this exists at this point

Categories

Resources