I have not seen a brick like this. I cant get the red blue and green bars. I have a version of touch it on my wing. I Was messing around with it today and now it wont boot. It just sits at the opening screen. It is black and it says touch-it. When I hard reset it formats and then same thing.
download the official wing rom and put your phone in boot mode. run the tmobile rom and you're back in business.
Related
ok i have a issue with my fone my phone is stuck on the tri-colored screen which says:
TITA100
SPL-1.20.01ipro
well i am as u can see im not good with tech. stuff like this but i would like sum advice or ideas on how to fix my problem. well here is how it all happened. my fone started off fine, out of the blue it started turning off by itself, then coming back on. it will reboot fine then as soon as i touch the screen or try to text or call it shut off on me. first i thought my battery was dying. that didnt work kept it on the charger switched out the battery, still nothing ended up doing the same. so a fren told me to hard reset or press the ok button pwr n the reset button at bottom using the stylst. now im stuck in bootloader mode after i ran a program:
HARD-SPL-MFG
and was told to flash the fone, which i had no idea what to do the person who was helping me i didnt hear frm again n i was stuck in this tricolored screen what should i do? i just want my phone up and running so i can use it once again...if thats possible..it be great i love the phone n dnt want the money i invested into it wasted
thank you soo much,
If I had to guess, it sounds like you have installed a SPL that is not compatible with your existing radio and rom.
First thing is I would try downloading the stock rom for your phone, I believe you can download this from HTC's website, I would download the newest and the one prior to it. Try installing the older of the 2 first since your SPL that you do have is older, and if it fails to install, then try the newer of the two.
If it still fails, come back here and I'm sure somebody else can give you more advice.
BTC
Tried to upgrade to Touch flo and installation froze, now my phone wont boot past the white t-mobile screen, anything i can do?
Pureplaya851 said:
Tried to upgrade to Touch flo and installation froze, now my phone wont boot past the white t-mobile screen, anything i can do?
Click to expand...
Click to collapse
was your phone hardspl'd? did you read how to flash? is it a herald or wing?
What rom were you trying to flash? try to get into the bootloader mode and reflash the original rom, Use this link if its a WING http://forum.xda-developers.com/showthread.php?t=321717 , to get into bootloader softreset while holding down the camera button, it will come up to a colorful screen with ipl and spl information... While in this screen connect the device to the computer and reflash..
i tried that but i doesn't wrk on my phone for some reason. please help me!!!!!!
hard reset?
ok since i got this phone i have had problems,but i updated it to 6.1 and it got better (locking up all the time)then i played with a bunch of custom roms,then the other day it just decided not to turn on at all,before it would just lock up at the htc screen,now when i turn it on the green light is on and nothing happnes?? i force it in the loader screen and have tryed getting it to take a rom that way and it just gets stuck and says loading but dosnt do anything? the update utilitly does not work either it keeps saying image is currupt?
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Hope it helped and good luck,
What version bootloader do you have? What image are you trying to load in bootloader.
i have opilo_240. i cant load any image nothing will take,no roms no radio no nothing
Are you sure you are naming it correctly and on a 2GB or less FAT32 sd card.
i have tryed it a million times, yes i have been typing it right.it recognizes it and starts to load it but then locks up. is there a way i can get this loader off the phone and take it back to original? maybe the loader is crap so if i try and put a original loader back in it will take a install again but i cant find any thing
Not possible that I know of to change bootloader without softspl which needs WM to run.
Where are you getting these images? What is your provider. Please update this in your profile so we can help easier.
my provider is metro pcs but its a sprint phone,i have tryed the sprint/htc 6.1 update then i tryed a couple of ryan mogul 6.5 roms.see since i got this phone (used) it had problems loading from the htc screen,sometimes i would have to soft reset about 5 times before it would load the o/s then sometimes it would go days without a problem,it did this with the stock image then got better with the 6.1 and thought it was good then i played with a couple roms and they all loaded ok but the phone was getting worse when locking up it would do it all the time,then i went back to the 6.1 sprint rom and it didnt get better just worse,then it wouldnt get past the htc screen,so i tryed again to put back to stock and now when i turned the phone on it vibrates then just the green light turns on,when i try and hard reset it just instantly says complete,i can boat to loader and connect to pc fine but when i try and load a image from cpu it goes to 1% then stops and says image file is corrupt, is my phone junk? i have a brand new touch pro coming today but i would like to get this mogul up and running its just a shame cause i loved this phone when it worked,im ready to throw it in the garbage
Get the .nbh from the following sprint .exe and try it on the sd card. If you can get into bootloader your phone shouldnt be a brick. Mtty might be an option but that isnt something I can teach you how to do very well.
ftp://ppcgeeks.com/Titan/CarrierRom..._RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
Upgraded my Titan from its Telecom stock rom (I'm from New Zealand) to the following:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship
But it no longer boots into Windows Mobile. It starts up as if it is going to boot, with a black Windows Mobile 6.5 screen coming onto the screen, and some numbers in red that then come onto the screen after a couple of seconds. The numbers on the bottom left are:
M-09
B-03
On the bottom right the numbers are:
P ACAAAAM-4070
R 1.47.00
D 3.56
Then it goes to another screen that says
HTC Windows Mobile
Powered by PPCKITCHEN
Once on this screen, nothing else happens. I can get into the Tricolour Bootloader Screen, which has the following numbers in the top red portion:
TITA100
SPL-1.04.0000
I have tried upgrading different things, but either the bootloader just goes to a screen that says "loading" and nothing else or it just comes up with a white bar that never moves off 0%.
Would really appreciate any help someone can give me on this. Would even consider sending to anyone who knew how to fix it, if they were pretty sure they could, as I can't seem to be able to do anything with it after days of searching forums, etc.
try renamed NBF file to TITAIMG.NBF put in <2G MicroSD card to flash
Yea, I have played around alot trying to do that. Used a standard MicroSD card, not SDHC. And still had no luck with all I did.
Note: I would even be willing to pay someone through paypal if they could help me fix it over the internet. Any takers?
You get this fixed yet? If not try locating a WinMo 6.0 shipped rom and try flashing that. Your bootloader is the stock non-gps version and it sounds like it does not like the new rom.
If you get it booted, then unlock with bootloader 2.40, then flash any 6.1 or 6.5 rom.
Good morning.
im a newbie at updating the HTC HD 2 Leo i have for T-Mobile (which is probably WHY i shouldnt have messed with it in the 1st place...).
i tried downloading the android gingerbread rom onto my phone last night and while downloading the software their was a partition error and my phone was stuck afterwards rebooting on the failed software dowload (would get stuck on a black screen only showing the HTC letters in green.)
i FURTHER screwed it up by trying to put it in bootloader mode and trying to install the Original software i found which i downloaded off a website for the factory version of my HTC HD 2 Leo.
NOW it only shows a black screen.. the computer cant sync my phone, the battery light is not showing and no signs of life...it wont even let me go into bootboader mode...all it says when i plug it in to my USB port on the computer is under hardware found " Qualcomm CDMA Technologies MSM"...
someone PLEASE help this lost noob... much appreciated
wow! erm.... have you tried a hard reset? recovery software might still be on there, with any hope.....
i tried , but the hd2 doesnt show ANYTHING on the screen, i tried holding both buttons and pushing the power on button but the factory screen wont pop up because the screen stays permenantly black
Sounds as though you flashed a T-MObile USA with a ROM with a .51 RADIO; if that is the case then the phone is bricked.
You could always telephone HTC and say you charged your phone overnight and it didn't respond the next day - with no mention of flashing the phone.
As you have found out flashing before reading can be fatal (for the phone) and expensive. I have flashed quite a few HTC WinMo phones, but for every different phone I read then reread the instructions.
thanx i appreciate it , it sux that i cant get it fixed.