installed fine but wouldnt run. it says error. anybody fix this? or does anybody know what settings you need to put it on order for the internet to work?
PS: i have the 34.99 unlimited plan.
anybody got htc connection setup running on their pro?
Why bother
Palm has their own built in.
Put in the SIM, it detects, reboots and you are configured
You don't need the HTC Connection Wizzard
lcohen999 said:
Why bother
Palm has their own built in.
Put in the SIM, it detects, reboots and you are configured
You don't need the HTC Connection Wizzard
Click to expand...
Click to collapse
i got tmobile US and it dont detect it. i can't even receive picture messaging
just use the htc connection setup cab file
disflipissofresh said:
i got tmobile US and it dont detect it. i can't even receive picture messaging
Click to expand...
Click to collapse
i also have t-mobile on my palm treo pro and i can txt and make calls
Do the following on you Treo Pro:
Start -> Settings -> Connections -> Connections -> Under "My ISP", click "Add a new modem connection" ->
Enter a name for the connection: T-Mobile
Select a modem: Cellular Line (GPRS, 3G) -> Next
Access point name: wap.voicestream.com -> Next
User name: {Blank}
Password: {Blank}
Domain: {Blank}
Click Finish
Hope this help.
Related
I just bought a (German ver.) MDA II. I have followed every tutorial I came across to set my phone for Cingular GPRS. I've signed up for the internet service through Cingular so this thing should work.
When I try to connect to the GPRS it says:
Cannot Connect
-------------------------------
Cannot connect for unknown reasons....
What can I possibly be doing wrong? Trust me, I have tried every different setting I ran across i.e. WAP, Data, Dialing Rules.
I know nothing (yet) about flashing or editing a ROM but intend on learning later. Is it possible that someone out there has a pre-configed ROM that I could flash this thing to solve _all_ of my problems?
Although this phone is from Germany, I believe the company I bought it through flashed the ROM for me to the English version??
ROM Version: 1.60.00WWE
ROM Date:12/03/03
Radio Version: 1.06.01
Protocol Version: 1337.16
ExtROM Version: 1.60.06
Is it my settings? Is it my ROM version? Am I holding my tongue right?
I beg and plead for your help.
Thanks!
Be glad to help. here are the settings I have discovered after much searching:
PROCEDURES FOR USING IMATE ON CINGULAR NETWORK
Goto Start->Settings->Connections
Click CSD Line Type:
Date rate: 9600 .v32
Connection element: Non-Transparent
Click OK
Click GPRS Setting
Make sure PAP Authentication is selected
Click GPRS-Setting
Make sure Class 8 (4R1T) is selected
Click OK
Now we're ready for the settings
Click Connections
Under My ISP Select Add a new Modem Connection
---NOTE--- I've been unable to get this working since adding the Media works package------
Name: Cingular GPRS (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access Point Name: isp.cingular
User Name: [email protected] (MUST BE UPPERCASE)
Password: ZXY203DC9K0402 or
Username: [email protected]
Password: CINGULAR1
Click Finished
You should now be at "My ISP" and have "Cingular GPRS" or similar listed for the name
Click OK
-------------------------------------------------------------
You should be in the main connections window
Under My Work Network, Click Add a New Modem Connection
Hit New
Name: WAP (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access point name: wap.cingular
Click Next
User Name: [email protected]
Password: CINGULAR1
Click Next
Click OK
You should be in the main connections window
Click Set Up My Proxy Server
Check both boxes BUT LEAVE the Proxy Server Box empty
Click Advanced
Type 66.209.11.61 in the WAP and Secure WAP Boxes
Click OK
Click OK
Click OK
Now you should be back in the general Communication settings
Start Inbox
Click on Accounts
Select Accounts
Select * SMS
Make sure the number is +13123149810
Click OK
Click OK
On your today screen, hit the "No new MMS Message"
Select Tools
Select Options
Select the Servers Tab
Click the Screen and Select New
Server Name: Cingular MMS
Gateway: 66.209.11.61
Server Address: http://mmsc.cingular.com
Click Ok
Select the Preferences Tab
Under Connect Via, Make sure My Work Network Is Selected
Under Connect to Server, Cingular MMS
Click OK
To use CSD(Circuit Switched Data) on the Imate, here's the procedure:
For WAP over CSD
Start->settings->connections->connections-<add a new modem connection
call it wap-csd (or whatever)
cellular line
next
number is 1-415-244-1012
next
name ->[email protected] (all caps)
password->CINGULAR1 (all caps)
finish
For Data over CSD (on or off net)
Start->settings->connections->connections-<add a new modem connection
call it data-csd (or whatever)
cellular line
next
number is
1-847-254-9270
next
name ->[email protected]
password -> ZXY203DC9K0402
finish
You should now have 4 different connections
Data-gprs
wap-gprs
data-csd
wap-csd
Under "normal " use the WAP setting is used.
cmccarter - Thanks for all of the info. I am much closer than before. I can connect via WAP now and my MMS is now configured correctly. THANKS!! BUT!!! It's still not allowing me to connect via GPRS. It still says that it cannot connect for unknown reasons. What else could I check??
What do you mean you couldn't get it to work after adding the media works package? Which connection stoped working?
Which brings me to another question; why would I use WAP over CSD or Data over CSD?? I don't know the difference. Heck, I don't even know the difference between WAP & GPRS. Can you tell I'm confused?
I used Afrocream's GPRS settings on this thread:
CLICK
They're almost identical, but what the heck. Works for me. Be careful of your entries and the CASE. UPPERCASE must be uppercase.
Also, be aware that (I believe) the SMS dial number *might* be regional. My phone uses a different number.
For more info on the differences between CSD & GPRS go to:
http://www.howardforums.com/
In the Cingular Message area there you will find lots of info.
I was unable to get the connection to isp.cingular to work and after talking to the CSRs at Cingular determined that it was not included in the Media Works package... no great loss as you can apparently tether to wap.cingular just as well. (tether= connect your pc via your phone using a cable, bluetooth or IR)
I might be mistaken but I have the Mediaworks package and, other than WAP sites, I'm connecting to isp.cingular.
re:
i just switched over to cingular and for the life of me cannot connect ot gprs or wap. i followed the direstions to the letter and im stuck please help...
seattleboi -- from what you posted it's very difficult to know what's going on. What happens when you try to connect? Are you sure there's no error in your entries (a slight typo, an unneeded space, etc?)
Are you sure that you have GPRS enabled with Cingular and that there's no problems in your area? Have you slipped the SIM card into another phone to confirm this?
Since these settings seem to be working for most of us (with iMate and other phones) there's no easy way to figure out why it's not working for you.
i did, it works now, but for some reason like every 4 hours it will not connect even rebooting several times, i end up deleting the connection settings and end up redoing them and rebooting a couple times to get it to work, my suspsicions are starting to fall on the rom image that im using, maybe skewring them up, the Rom i am using is the latest ATT rom WM 2003 that i made in the kitchen, so later on today i guess i will have to try the t-mo rom and see is that is giving me problems, (Evidently the night i did try to connect the GPRS network was down) and yes i did try with another phone i have a 3650 at my fingertips from Cingular to try. 8)
I have just purchased a k-jam and I am on a vodafone uk contract and I am not being able to connect to the internet. Can someone give me any advice on the necessary connection methods. Vodafone are not being of any help.
Assuming you have GPRS etc enabled on the SIM and its a contract SIM
use the following:
username: web
password: web
APN/Access Point Name: internet
Should work fine..
The best way to go online with your contract is to use GPRS. This is very easy to set up on the Wizard.
Firstly click Settings
Then click the Connections tab at the bottom
Next select Connections
Under My ISP, choose 'Add a new modem connection'
Give the connection a name (e.g. Vodafone GPRS) and select the modem type as 'Cellular Line (GPRS)'. Then click next.
Now enter the 'Access Point Name' as internet and click next.
Now enter the User Name as web and the password as web and finally click finish.
That should do it. Now open internet explorer and enter a web page and you should be ok. You will, of course, have to setup your e-mail settings separately.
Hope this helps
Hi,
Just unzip this and Install the Vodafone CAB.
Hi tried installing Vodafone_UK_PAYT.CAB on my XDA Mini S, goes through the install ok, but for some reason it doesn't seem to add any of the settings
Any ideas why? Does it need the k-kam ROM or some additional settings from this for it to work?
thanks in advance
Graeme
i wouldn't bother with the cab file at all. just set it up manually.
there is a good tutorial on vodafone web site:
http://online.vodafone.co.uk/dispat...&_pageLabel=Page_BOS_PDA_Guide&pageID=GM_0302
the salient points are:
dial:
*99#
post dial string:
+cgdcont=1,"ip","internet"
speed setting:
57600
untick:
wait for dialing tone
stop bits set to 2
user name:
web
password:
web
rgds
sry, stupid me. thats for an external phone modem ....
sorry to hyjack fellas but same topic . I have a wanadoo broadband contract and use a wireless modem router for my home PC network.
How do I set the wizard up to utilise this? please make it simple fellas :roll:
ok sorry doh all sorted now. Just had to click on the wifi icon and its connected surfin yeah. Now just got to set up my emails.
ok, GPRS setup / working now.
Just did this manually as per Hampers' post above but had to change the access point name to pp.vodafone.co.uk (case sensitive) for the connection to work as am using a Pay As You Talk sim
G
Does anyone know the proper complete settings for tmobile mms? advance settings also would help as well(if necessary). I have an unlocked phone, tmobile web helped some/customer service was terrible!
server name: tmobile mms
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: tmobile mms
Sending limit: 300k
WAP version: WAP 2.0
Ive done this and I still cant send picture mail. My treo does it no problem
What rom are you using?
duprade said:
What rom are you using?
Click to expand...
Click to collapse
ROM: 1.8.405.1WWE (WM5)
well, lets start off with what kind of phone do you have? Is it a Herald? and you're trying to use it on Tmobile USA?
Are you running the stock HTC rom on it? or have you installed a 3rd party rom from this site or something?
duprade said:
well, lets start off with what kind of phone do you have? Is it a Herald? and you're trying to use it on Tmobile USA?
Are you running the stock HTC rom on it? or have you installed a 3rd party rom from this site or something?
Click to expand...
Click to collapse
I have Herald p4350
Stock ROM
Google Maps
Audio Manager= reinstalled after freezing phone(V1.02)
Storage:
Yahoo Go
vTap videos
RealNetworks
OmniGSoft(golf,solitare)
WM Live Search
Smart Mahjongg
Extreme text(deleted but still shows up)
This should do it.
duprade said:
This should do it.
Click to expand...
Click to collapse
Thanks duprade, I loaded the cab but I still have the same problem
taz357 said:
Thanks duprade, I loaded the cab but I still have the same problem
Click to expand...
Click to collapse
try changing CHAP to PAP in GPRS settings maybe
i had the same problem with my kaiser after hard reset
wrrrr
No Network Wizard?? :-/
bommerlunder: I will try
mv3: nope. all manual and very fustrating only because Ive tried at least six times already without positive result
bommerlunder how long & how did you get yours working??
bommerlunder said:
try changing CHAP to PAP in GPRS settings maybe
i had the same problem with my kaiser after hard reset
wrrrr
Click to expand...
Click to collapse
taz357 said:
bommerlunder how long & how did you get yours working??
Click to expand...
Click to collapse
ok, mine is with at&t rom, i guess (i'm new to pocketpc phones so im not sure), so first i did:
start -> setting -> connections -> connections ad deleted "MEdia Net" and renamed it to T-Mo Data.
Then this:
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mo Data.
Enter T-Mo MMS in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS, 3G) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish (leaving all blank)
Then:
Tap Start again.
Tap Messaging.
Tap Messages.
Tap Menu.
Tap MMS Options.
Tap the Servers tab.
There i had AT&T MMS so i deleted it
Tap New.
Enter T-Mo MMS in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mo Data from the Connect via drop down list.
Tap DONE
and that worked for me...
Trying again, and again, and again..........
Ok, I've cleared everything on my settings and input exactly (again) these settings. I have noticed that the selection for connections does not have 3G listed, just GPRS. Does that make a difference??
bommerlunder said:
ok, mine is with at&t rom, i guess (i'm new to pocketpc phones so im not sure), so first i did:
start -> setting -> connections -> connections ad deleted "MEdia Net" and renamed it to T-Mo Data.
Then this:
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mo Data.
Enter T-Mo MMS in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS, 3G) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish (leaving all blank)
Then:
Tap Start again.
Tap Messaging.
Tap Messages.
Tap Menu.
Tap MMS Options.
Tap the Servers tab.
There i had AT&T MMS so i deleted it
Tap New.
Enter T-Mo MMS in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mo Data from the Connect via drop down list.
Tap DONE
and that worked for me...
Click to expand...
Click to collapse
taz357 said:
Ok, I've cleared everything on my settings and input exactly (again) these settings. I have noticed that the selection for connections does not have 3G listed, just GPRS. Does that make a difference??
Click to expand...
Click to collapse
no...it should not...it is just about the speed (gprs - slowest, hpsdpa - fastest)
other way (this is what i did) - install a new ROM for yourself...i got my new Duttys ROM and it is great, a lot of faster and it downloads settings automatically.
Sounds good
Ok, where?? will it take long??
bommerlunder said:
no...it should not...it is just about the speed (gprs - slowest, hpsdpa - fastest)
other way (this is what i did) - install a new ROM for yourself...i got my new Duttys ROM and it is great, a lot of faster and it downloads settings automatically.
Click to expand...
Click to collapse
taz357 said:
Ok, where?? will it take long??
Click to expand...
Click to collapse
it takes about 15-25 minutes.
if you don't want to read this - http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser
(you should if you want to know what's going on)
you can download this file first:
http://forum.xda-developers.com/attachment.php?attachmentid=53280&d=1191643466
(it is from that thread http://forum.xda-developers.com/showthread.php?t=334679)
if it won't install correctly (white screen) you also have to download and install this: http://forum.xda-developers.com/showthread.php?t=354061
then you should do a backup of your files
and when you install HARDspl you have to install this:
http://www.4shared.com/account/file...ficial_WM61_Release.html?sId=njZCc1kfvTkcmXjJ
then perform a hard reset and that's it, you'll have a new ROM on your device
and the end you probably will have to install one of the compatible radios, for ex this ftp://xda:[email protected]/Uploads/Kaiser/Radio/KAIS_Radio_Only_1.64.08.21_CustomRUU.rar
and that's it..
if you have any questions try looking at the second post here - http://forum.xda-developers.com/showthread.php?t=369505 or send me PM. i learned all the stuff yesterday so i'm still a newbie here, but everything works great on my kaiser so far. (finally)
you have t-mobile, so i thought you had a wing.. but, you said you said you have if a herald. either way, neither of them have a 3g chip... i think.
your herald & t-mobile should use gprs and edge.. no 3g.. and definitely not 3.5 g(hsdpa).. for mms i believe it connects to gprs
if you have network wizard... look here
start --> settings --> connections --> network wizard
start --> programs --> network wizard
might be in one of those
if you have the stock rom and it's not there..
then try this..
you will select your country and your carrier.. and it will set up your data / network connections for you.
HTC Network Wizard v1.0 Build 29982.1.0.1.7
i think there's a newer one, but that one should work.
that also maybe useful: http://tmobileuspublic.wdsglobal.com/phonefirst
Hey Folks,
I'm having difficulty setting up MMS on the HD2, I have just called O2 and they don't support this device. Does anyone know how to configure the settings manually for MMS messaging?
Hi, I got these settings from an helpful O2 rep.
MMS setup – ensure GPRS settings are completed
· Select 'Start' > Select 'Messaging' > Select 'Menu' > Select 'MMS Configuration' or ‘tools’ > Select 'Servers' tab > Select 'New'
· Type in Server name or 'O2 MMS'
· Select 'Gateway' and type in '193.113.200.195'
· Select 'Port number' and type in '9201'
· Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
· Select 'Connect via' and select 'My Work Network''
· Click 'OK'
· Highlight 'O2 MMS' and click on 'Set As Default'
are you having trouble sending MMS messages? I ran the auto setup function and I can send messages fine....problem is...I'm not receiving any!!
and I cant see any way to enter the setting manually since message menu doesn't exist.
tried the 02 website, it just says there's a problem and can't proceed....tried texting for the settings, doesn't work either
so...any more ideas?
twisted-pixel said:
are you having trouble sending MMS messages? I ran the auto setup function and I can send messages fine....problem is...I'm not receiving any!!
Click to expand...
Click to collapse
I had same problem swapped sms service to GSM only now I receive texts fine
fingers crossed
MMS problems not SMS
Yea I got the manual configuration settings from 02 aswell but unfortunatly the options are not available in the HD2, don't know if its a HTC sense thing or a WM6.5 design change to the UI that disables the old MSS configuration settings... anyone got suggestions... I hate having one of the best phones on the market and can''t receive MMS's ;-(
twisted-pixel said:
MMS problems not SMS
Click to expand...
Click to collapse
oops sorry
my mms will send but not receive .grr.. least got sms working tho
Anybody solve this issue, I can send but not receive MMS on O2 in the UK.
I just use the settings that the phone sets up for O2, they are the contract settings though and not PAYG, just tried it now and I also can send mms but can't receive them, and O2 won't help as they don't support the phone.
Hi, I couldn't receive MMS on O2, but have manually configured it, and it's now working fine.
The configuration screen is found on the Sense UI here:
Messages, All messages, Menu, Settings, Options, MMS Server (right softkey)
Hope that helps.
try this, it worked for me.
Scroll to settings>menu>all settings>connections>connection setup.
Now choose your Country and Operator. Let it do its bit and re-boot.
Should be all working now.
chill......
chill today said:
try this, it worked for me.
Scroll to settings>menu>all settings>connections>connection setup.
Now choose your Country and Operator. Let it do its bit and re-boot.
Should be all working now.
chill......
Click to expand...
Click to collapse
Works for me as well, but only if you are on contract, the PAYG settings are different.
configuring MMS Settings
garethmc said:
Yea I got the manual configuration settings from 02 aswell but unfortunatly the options are not available in the HD2, don't know if its a HTC sense thing or a WM6.5 design change to the UI that disables the old MSS configuration settings... anyone got suggestions... I hate having one of the best phones on the market and can''t receive MMS's ;-(
Click to expand...
Click to collapse
Hi not sure if you solved this but for other peoples reference here is how you can check your settings.
Run the connection setup which will create an MMS connection that you can check in
all settings /connections/connections/advanced tab/select networks> there should be a connection called *.* MMS Settings > click edit to make sure the settings are as they should be.
* make sure when you exit the network management screen that your default internet connection is selected or your internet will not work.
exit from here and then go to messaging tab on the home screen.
choose all messages/menu/settings/options.
in this screen choose menu/MMS server and then configure or check your settings.
In my case the connection wizard had a space in the server name and the wrong port selected
Hope this helps
From connection setup makesure you select to update connection setup database. It found a new one when i did it.
optiknerv said:
From connection setup makesure you select to update connection setup database. It found a new one when i did it.
Click to expand...
Click to collapse
thanks but the connection update still contains errors for me
hence the need for manual adjusting
regards lakeman
Right,
Firstly I hope that people have solved their issues with this but if not here's how i got mine to work.
It seems that there are two steps to gettign MMS to work properly.
Step 1: Configure the MMS Settings:
There might be other ways of doing this but this is how i did it and it worked.
Start > HTC Messages > Menu > Settings > Options > Menu > MMS Server
Select O2 UK Or whatever if you're doing this for another network.
The O2 settings should be as follows:
Contract & PAYG are the same here.
Server name: O2UK
IP Address: 193.113.200.195
Port Number: 8080
Server Address: http://mmsc.mms.o2.co.uk:8002
Connect Via: My Work Network *
This is actually the important bit and the throwback to theold days of windows mobile. MMS' are not received over you're standard data connection so you have to specify different settings so HTC / O2 are using the Work Settings to get around this.
Send Limit: 300KB
WAP Version: WAP 2.0
Step 2: Configure the connection settings for 'My Work Network'
Start > Settings > Menu > All Settings > Connections > Connections
Select 'Manage existing connections' under My Work Network.
Select what ever option is there and selected and hit the edit button.
Enter a name for the connection: anythingyouwant
Select a modem: CellularLine (GPRS)
hit next.
Now here the settings do start to differ for contract and PAYG:
Contract: Access Point Name: wap.o2.co.uk
PAYG: Access Point Name: payandgo.o2.co.uk
hit next.
Contract: Username: o2wap
Contract: Password: password
Contract: Domain: (Leave Blank)
PAYG: Username: payandgo
PAYG: Password: password
PAYG: Domain: (Leave Blank)
hit finish.
Hopefully you should now be enjoying MMS on you're Leo
Missing DLL
Phoenix,
Looks good except that having gone back to the winmobile sms client as I need access to my subfolders, it seem that the dll that is "removed" as part of that process is needed to make MMS work on the HD2. Have been experimenting and if one goes back to the HTC client (this recreates the missing dll) then MMS messaging works fine.
Although MMS is not a big deal to me it irks me that I can't get it to work in these circumstances. Have chased Zenyee, who developed this tweak in the first place, on how he is getting on with solving the MMS issue but no response to date.
So anyone in the same boat who has managed to crack MMS sending, please PM me.
Cheers
WB
Ive not cracked it as such but found something interesting....I was fed up that my device couldnt do mms whilst using leo energy rom, tried doing manual settings etc,ended up flashing original leo uk o2 rom....
I have crossed reference all the settings and the only thing i find different is that on the original o2 rom under "my work network" gprs is selected where as on cooked rom gprs, 3g is the option.
could this simple thing be causing issues??
HELP
i'm also having trouble with o2 mms settings the help on this page did not help. i cannot send or receive mms. i purchased the handset from ebay, it was locked to tmobile. i've had it unlocked and all other functions (web, mail) work fine. please help. it's driving me nuts.
Hi All,
Please help me in setting up Globe internet on my HTC touch. Im using Onyx 5.6 and Im using Globe Telecom Philippines. Tried using connection wizard but still cant connect to the internet. Connection wizard works with Smart Communication Philippines with no problems. Why is that..? Help please!
Thanks,
I'm using sun cellular and the network wizard automatically configured it...
have you tried flashing a different radio version???
get radios here:
http://forum.xda-developers.com/showthread.php?t=527048&highlight=radio
Solution:Globe Internet Settings
I've found the solution. Just need to manually set it up.
Here's the settings.
Internet (Manual Configuration)
Click Start
Select Settings
Go to Connection tab
Tap Connections Icon
Go to Advanced tab
Tap Select Networks
On programs that automatically connect to the Internet should connect using Select New
Enter a name for the settings: MyGlobe Internet Settings
Go to Modem Tab then select New
Enter a name for the connection: Globe Internet
Select a modem: Cellular line (GPRS, 3G)
Then click Next
Access point name: internet.globe.com.ph (for postpaid)
http.globe.com.ph (for prepaid)
Then click Next
Leave username, password, Domain fields blank
Select Finish
MMS
Click Start
Select Settings
Go to Connection tab
Tap Connections Icon
Go to Advanced tab
Tap Select Networks
On programs that automatically connect to the Internet should connect using Select New
Enter a name for the settings: MyGlobe MMS Settings
Go to Modem Tab then select New
Enter a name for the connection: Globe Internet
Select a modem: Cellular line (GPRS, 3G)
Then click Next
Access point name: mms.globe.com.ph
Click Next
Leave Username, Password and Domain fields blank
Select Finish
Go to Start
Select Messaging
Open SMS\MMS
Select Menu
Then MMS Option
Go to Server Tab
Select New
Server name: Globe MMS
Gateway: 192.40.100.20
Port Number: 9201
Server Address: http://192.40.100.22:10021/mmsc
Connect Via: myGlobe MMS Settings
Send Limit: 100k
WAP Version: WAP 1.2
(My problem now is MMS does not want to send) I'll try to figure it out. Anyway thanks dude!
thanks! this has been very helpful!
thanks its working in my kaiser!
mabuhay! /cheers!
Hi! I also have HTC HD2 can i ask if someone already configured how to send MMS? I am a Globe subscriber by the way thanks! mabuhay!
Is there nothing in the HD2 section? Or windows mobile general? You'll get more hits there as this is a wanning community here.
hi.. i just bought htc mini hd.. can anybody help with the 3G and mms settings.. im new here btw thanks