Related
I just bought a (German ver.) MDA II. I have followed every tutorial I came across to set my phone for Cingular GPRS. I've signed up for the internet service through Cingular so this thing should work.
When I try to connect to the GPRS it says:
Cannot Connect
-------------------------------
Cannot connect for unknown reasons....
What can I possibly be doing wrong? Trust me, I have tried every different setting I ran across i.e. WAP, Data, Dialing Rules.
I know nothing (yet) about flashing or editing a ROM but intend on learning later. Is it possible that someone out there has a pre-configed ROM that I could flash this thing to solve _all_ of my problems?
Although this phone is from Germany, I believe the company I bought it through flashed the ROM for me to the English version??
ROM Version: 1.60.00WWE
ROM Date:12/03/03
Radio Version: 1.06.01
Protocol Version: 1337.16
ExtROM Version: 1.60.06
Is it my settings? Is it my ROM version? Am I holding my tongue right?
I beg and plead for your help.
Thanks!
Be glad to help. here are the settings I have discovered after much searching:
PROCEDURES FOR USING IMATE ON CINGULAR NETWORK
Goto Start->Settings->Connections
Click CSD Line Type:
Date rate: 9600 .v32
Connection element: Non-Transparent
Click OK
Click GPRS Setting
Make sure PAP Authentication is selected
Click GPRS-Setting
Make sure Class 8 (4R1T) is selected
Click OK
Now we're ready for the settings
Click Connections
Under My ISP Select Add a new Modem Connection
---NOTE--- I've been unable to get this working since adding the Media works package------
Name: Cingular GPRS (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access Point Name: isp.cingular
User Name: [email protected] (MUST BE UPPERCASE)
Password: ZXY203DC9K0402 or
Username: [email protected]
Password: CINGULAR1
Click Finished
You should now be at "My ISP" and have "Cingular GPRS" or similar listed for the name
Click OK
-------------------------------------------------------------
You should be in the main connections window
Under My Work Network, Click Add a New Modem Connection
Hit New
Name: WAP (Or whatever you want)
Select a Modem: Cellular Line (GPRS)
Click Next
Access point name: wap.cingular
Click Next
User Name: [email protected]
Password: CINGULAR1
Click Next
Click OK
You should be in the main connections window
Click Set Up My Proxy Server
Check both boxes BUT LEAVE the Proxy Server Box empty
Click Advanced
Type 66.209.11.61 in the WAP and Secure WAP Boxes
Click OK
Click OK
Click OK
Now you should be back in the general Communication settings
Start Inbox
Click on Accounts
Select Accounts
Select * SMS
Make sure the number is +13123149810
Click OK
Click OK
On your today screen, hit the "No new MMS Message"
Select Tools
Select Options
Select the Servers Tab
Click the Screen and Select New
Server Name: Cingular MMS
Gateway: 66.209.11.61
Server Address: http://mmsc.cingular.com
Click Ok
Select the Preferences Tab
Under Connect Via, Make sure My Work Network Is Selected
Under Connect to Server, Cingular MMS
Click OK
To use CSD(Circuit Switched Data) on the Imate, here's the procedure:
For WAP over CSD
Start->settings->connections->connections-<add a new modem connection
call it wap-csd (or whatever)
cellular line
next
number is 1-415-244-1012
next
name ->[email protected] (all caps)
password->CINGULAR1 (all caps)
finish
For Data over CSD (on or off net)
Start->settings->connections->connections-<add a new modem connection
call it data-csd (or whatever)
cellular line
next
number is
1-847-254-9270
next
name ->[email protected]
password -> ZXY203DC9K0402
finish
You should now have 4 different connections
Data-gprs
wap-gprs
data-csd
wap-csd
Under "normal " use the WAP setting is used.
cmccarter - Thanks for all of the info. I am much closer than before. I can connect via WAP now and my MMS is now configured correctly. THANKS!! BUT!!! It's still not allowing me to connect via GPRS. It still says that it cannot connect for unknown reasons. What else could I check??
What do you mean you couldn't get it to work after adding the media works package? Which connection stoped working?
Which brings me to another question; why would I use WAP over CSD or Data over CSD?? I don't know the difference. Heck, I don't even know the difference between WAP & GPRS. Can you tell I'm confused?
I used Afrocream's GPRS settings on this thread:
CLICK
They're almost identical, but what the heck. Works for me. Be careful of your entries and the CASE. UPPERCASE must be uppercase.
Also, be aware that (I believe) the SMS dial number *might* be regional. My phone uses a different number.
For more info on the differences between CSD & GPRS go to:
http://www.howardforums.com/
In the Cingular Message area there you will find lots of info.
I was unable to get the connection to isp.cingular to work and after talking to the CSRs at Cingular determined that it was not included in the Media Works package... no great loss as you can apparently tether to wap.cingular just as well. (tether= connect your pc via your phone using a cable, bluetooth or IR)
I might be mistaken but I have the Mediaworks package and, other than WAP sites, I'm connecting to isp.cingular.
re:
i just switched over to cingular and for the life of me cannot connect ot gprs or wap. i followed the direstions to the letter and im stuck please help...
seattleboi -- from what you posted it's very difficult to know what's going on. What happens when you try to connect? Are you sure there's no error in your entries (a slight typo, an unneeded space, etc?)
Are you sure that you have GPRS enabled with Cingular and that there's no problems in your area? Have you slipped the SIM card into another phone to confirm this?
Since these settings seem to be working for most of us (with iMate and other phones) there's no easy way to figure out why it's not working for you.
i did, it works now, but for some reason like every 4 hours it will not connect even rebooting several times, i end up deleting the connection settings and end up redoing them and rebooting a couple times to get it to work, my suspsicions are starting to fall on the rom image that im using, maybe skewring them up, the Rom i am using is the latest ATT rom WM 2003 that i made in the kitchen, so later on today i guess i will have to try the t-mo rom and see is that is giving me problems, (Evidently the night i did try to connect the GPRS network was down) and yes i did try with another phone i have a 3650 at my fingertips from Cingular to try. 8)
I have an XDA1 and an o2 payandgo SIM. I have the GPRS activated and have no problem picking up my emails, but I can't use IE or MSMess. It tries to connect for a few minutes then times out. The connection details I have entered are as follows:
APN: payandgo.o2.co.uk
Username: payandgo
P/W: password
Does anyone have any idea what I can do to get IE and MSMess to work?
Excellent forum BTW, I've learnt loads in the last few days reading here...
Enable the proxy server setting in connection options and use:
193.113.200.195
You'll now be able to connect to HTML websites via Internet Explorer, but you'll not be able to use MSN Messenger via GPRS unfortunately.
seraphic, are you saying we can get full internet on O2 payg over gprs, I didnt think it was possible, I use the gsm to access the internet to use my 300 free minutes. If so can you give me the full settings.
Deke, what settings do you use to set up your pop 3 email over gprs.
Seraphic said:
Enable the proxy server setting in connection options and use:
193.113.200.195
You'll now be able to connect to HTML websites via Internet Explorer, but you'll not be able to use MSN Messenger via GPRS unfortunately.
Click to expand...
Click to collapse
Great, thanks. How do I do that? I've looked in the Connections bit, but the only reference I can find for proxy servers in under the 'Work network' section. Did I mention I'm using PPC2003?
Cruisin', I'll check my settings for you when I get home.
I'd be delighted if o2 payg did gprs,but 2 months ago they said no.I doubt if it's changed.
LMX, GPRS is definitely available on O2 P&G, I have it and use it daily for emails, it's the web-browsing I'm having trouble with.
You need to set up your GPRS settings under the work connections option so you can use a proxy.
cruisin-thru said:
seraphic, are you saying we can get full internet on O2 payg over gprs, I didnt think it was possible, I use the gsm to access the internet to use my 300 free minutes. If so can you give me the full settings.
Deke, what settings do you use to set up your pop 3 email over gprs.
Click to expand...
Click to collapse
Using the proxy server setting you can indeed view HTML sites over pay as you go GPRS. You can't use MSN Messenger, as it only allows access to port 80.
Cruisin',
Sorry for the delay in responding; here are the settings I use for email:-
First off you need to create a new account so that you have SMS, ActiveSync and eMail. Then run through the settings entering your details (all pretty straightforward stuff). The server info is dependent on whoever is your email server. I have a pop3 o2 account to make it easy, so the servers are mail.o2.co.uk (incoming) and smtp.o2.co.uk (outgoing).
Hope this helps.
Seraphic,
I'm fully webb'd up now, thanks a lot!
I have been told many times that it is possible for internet over gprs on O2 payg, I have tried every suggestion to the letter, I cannot do it, I can get wap over gprs, I can get internet over gsm. I was told by an O2 technician on this forum that it was not possible to get full internet over gprs with O2 payg sim. How can some people get it and others cant? I would be very grateful to see the full settings for the xda/xda 2 listed in a foolproof manner.
OK, full instructions:
* I recommend deleting any existing GPRS settings you have under the work connection settings before entering these to avoid confusion *
1. Go to Start -> Settings -> Connections Tab -> Connections.
2. You'll see 2 sets of option links. 'My ISP' and 'Work'. Under the work links, choose 'Add a new modem connection'.
3. Name for connection: o2 gprs. Modem: Cellular Line (GPRS). Tap Next.
4. Access Point Name: payandgo.o2.co.uk
5. Username: payandgo
6. Password: password
7. Tap Finish.
8. Back in the connections settings screen, tap 'Edit My Proxy Server'.
9. Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
10. In the proxy server box enter: 193.113.200.195
11. Tap OK.
12. Back in the connections settings screen, tap the Advanced tab.
13. Tap 'Select Networks'
14. In both drop down boxes choose 'Work' as the connection. Tap OK.
15. Tap OK again.
16. You are now ready to surf o2 pay as you go gprs full internet.
That's what I did and it works well, but do bear in mind the O2 network is very tempremental; I've been trying to get a connection all day with no joy and I KNOW my settings are correct.
One thing I have noticed though, I can't pick up my emails anymore. It seems the outbox will only connect with an ISP connection and IE will only work with a work/proxy connection. Can I get over this somehow?
iT WORKS, IT WORKS, IT WORKS. :shock: :shock: :shock: :? 8) :lol: :wink:
Glad to hear it
Connection problems
I have just got an unlocked M1000 and I have been trying to set it up to allow me to connect to the internet using a pay as you go sim. I have followed the instructions above, but i just keep on getting errors of the page not being able to load. I know that the pages exist as I am just using big sites pages such as microsoft.com etc. at the moment. Anyone got any ideas on what the problem could be.
I think they blocked the port for internet over gprs.
Yes they have altered a lot of thinge recently. The trick to get html throught the wap portal was blocked & they also blocked all except wap on the GSM WAP dial up too. There is a different Mobile WEB GSM number but that is 40p a minute so GPRS would probably be cheaper.
Mobile Web on Pay and Go
Dingo mentions that there's another GSM number that's 40p a min to access mobile web....................does this mean I can actually get full HTML web access on my Pay and Go XDA ????? How (what's the number?)
I only need to surf HTML pages occasionally - so it's not worth going to contract .................
Thanks
Okay, I updated my firmware on my PSV-M3100 to the one here
http://forum.xda-developers.com/showthread.php?t=281146
And all works fine in terms of day to day usage of the PDA, but when trying to access WAP or the internet via 3G or GPRS I'm getting errors saying the connection needs editing.
Would someone running the default UK Orange firmware be kind enough to post the connection settings that come with the SPV-M3100 as standard.
I even called Orange to help but "the guy who knows the SPV-M3100 has gone home for the day" not that it is a M3100 issue, just any old Orange 3G settings I imagine?
Anyway, any help on this would be appreciated.
I have tried searching here and the net for what should be in the connections area but very little info is out there
maybe this can help:
http://www.pda-friendly.net/PDA_GPRS_Settings.htm
Thanks, but I was looking for something a bit more thorough...
Settings for Orange World, Orange Internet, Orange MMS
And then the connection settings for GPRS/3G under these
Plus proxies etc.
Still, I am meant to have Orange calling me back today to help me out here, so whatever they tell me I'll document here for the Wiki.
Cheers
ok, i don't know if there's any cab available with all the settings, but a quick search on the networking forum poped up this which also contains MMS settings:
http://forum.xda-developers.com/showthread.php?t=224183
Thanks for those...
Orange are baffled and now my phone number is not recognised by Orange World at all, and I can't see any website sites...
I'll give them 24 hours more to fix or I cancel my contract (it'll be my 3rd SPV M3100 in 10 days - must be a record).
...at least I can get a 3G connection without it bombing out, even though I can't do anything with it.
Sweet! Those settings worked perfectly on my Orange UK M3100, just as they have on all my other devices. Shame there isnt a cab that can do the same!
Cheers,
Fin
Are these of any help?
http://www.filesaveas.com/gprs.html
Hi There,
Just to let you know, you can get the settings straight from the Orange UK website. Just create a free account based on your billing and phone number, and there will be a section for them to either SMS you the settings to your M3100 or for you to stick them in yourself.
I recently put on WM6 onto my M3100, and just put the orange wap setting. Even though there are originally about 3 or 4 different gprs settings on the M3100, the only one that really ever is used is the orangewap access point settings. The orangeinternet access point settings are never touched when the M3100 3G access is taking place.
FYI from the orange site under 3G Setup for M3100:
Setting up the data account
1. On the PDA, tap on Start and then Settings.
2. Tap on the Connections tab.
3. Tap on the Connections icon.
4. Tap on the Advanced tab.
5. Tap on Select Networks.
6. Under the first drop down box, tap on New…
7. In the Enter a name for these settings: field, enter Orange GPRS WAP
8. Tap on the Modem tab.
9. Tap on New…
10. In the Enter a name for the connection: field, enter Orange GPRS WAP
11. Tap on the Select a modem drop-down list and select Cellular Line (GPRS, 3G).
12. Tap on Next.
13. In the Access point name: field, enter orangewap
14. Tap on Next.
15. Tap on Finish.
16. Tap on the Proxy Settings tab.
17. Select the This network connects to the Internet option.
18. Select the This network uses a proxy sever to connect to the Internet option.
19. Tap on Advanced… Tap on WAP.
20. In the Server field, enter 192.168.071.035
21. In the Port field, enter 8080
22. Tap on ok five times
23. Tap on x to close the Settings screen.
24. Tap on Start, Programs and then Internet Explorer.
25. Tap on Menu.
26. Tap on Favorites...
27. Tap on the Add / Delete tab.
28. Tap on Add...
29. In the Name field, enter Orange GPRS WAP
30. In the Address field, enter http://wap.orange.co.uk
31. Tap on Add.
32. Tap on ok.
33. Tap on x.
The new WAP profile is now configured and ready for use.
I did everything apart from Step 21, whereby when I wrote my settings down, the port number remained at 9201, NOT 8080 as written in step 21.
Give this a go, and see if it works for you.
Good Luck!
if you're on contract, the accesspoint is orangeinternet no password, nothing.
for MMS settings; google for them, a site called filesaveas.com has them
findus said:
Sweet! Those settings worked perfectly on my Orange UK M3100, just as they have on all my other devices. Shame there isnt a cab that can do the same!
Cheers,
Fin
Click to expand...
Click to collapse
Wanna bet!
I have created a cab file that will install Orange UK internet, WAP and MMS settings to make things a little easier!
Hi,
I have upgraded to 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10 on my M3100 which works great except for the 3G connection. To configure the device I used the 'Orange Internet MMS Settings.cab'.
Once the Direct push is configured for my exchange server, the device downloads emails. The device then drops the 3G/GPRS connection and the activesync screen shows error with No connection for data.
Looking into the xml files saved from the original Orange ROM shows extra settings that do not appear in the 'Orange Internet MMS Settings.cab' file.
Has anyone else seen this issue or have more info on Orange 3G settings?
Many Thanks
Crammy
I've flashed my phone with this WM6 ROM as well. Has your SPV M3100 stopped receiving/sending MMS's ?? I've checked and re-checked my phones MMS settings a dozen times and also had orange send them to my phone cia SMS but no joy. I wonder if it is just me or a common problem with the new WM6 ROM's and the M3100?
Mine works fine.
As long as you set up the MMS data connection AND the mms server correctly, yours will as well.
There are hundreds of threads here and elsewhere with the correct way - but the key is to set up an ORANGEMMS connection in the "private" connection settings (with user Orange, password Multimedia and APN as orangemms, then set up Orange MMS server in MMS settings with Gateway IP (proxy) address: 192.168.224.10 , Port: 9201, MMS Message (Relay) Server URL http://mms.orange.co.uk/
unwired4 said:
Mine works fine.
As long as you set up the MMS data connection AND the mms server correctly, yours will as well.
There are hundreds of threads here and elsewhere with the correct way - but the key is to set up an ORANGEMMS connection in the "private" connection settings (with user Orange, password Multimedia and APN as orangemms, then set up Orange MMS server in MMS settings with Gateway IP (proxy) address: 192.168.224.10 , Port: 9201, MMS Message (Relay) Server URL http://mms.orange.co.uk/
Click to expand...
Click to collapse
Looks like we are having a double conversation here!! Anyway. I have deleted my original MMS settings as these were set up in the "internet" connection, not the "private" connection as you advise. I have used exactly the setting you show above but when I try to send an MMS I can't and I just get the timer symbol showing they cannot currently be sent. I'm really at a dead end hear unless you have any other ideas?? I really appreciate you taking the time out to help though.
crammy said:
Hi,
I have upgraded to 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10 on my M3100 which works great except for the 3G connection. To configure the device I used the 'Orange Internet MMS Settings.cab'.
Once the Direct push is configured for my exchange server, the device downloads emails. The device then drops the 3G/GPRS connection and the activesync screen shows error with No connection for data.
Looking into the xml files saved from the original Orange ROM shows extra settings that do not appear in the 'Orange Internet MMS Settings.cab' file.
Has anyone else seen this issue or have more info on Orange 3G settings?
Many Thanks
Crammy
Click to expand...
Click to collapse
I'm in the same boat. Got my GPRS working (thanks very much to the chap that uploaded the cab file).
Just need the 3G settings and I'm set.
Any help appreciated
rabdo said:
Wanna bet!
I have created a cab file that will install Orange UK internet, WAP and MMS settings to make things a little easier!
Click to expand...
Click to collapse
Thanks for that, it set up internet ok (although I had to manually change the DNS servers!) but MMS doesn't work without tweaking. Anyone else had similar probs?
Thanks again,
Fin
findus said:
Thanks for that, it set up internet ok (although I had to manually change the DNS servers!) but MMS doesn't work without tweaking. Anyone else had similar probs?
Thanks again,
Fin
Click to expand...
Click to collapse
Yes, there was a slight problem with the cab file which caused problems for some so I have updated it. This is for Orange UK contract customers and installs MMS settings and Internet settings
orange world webpage
Thanks for the settings, however when I go to orange world all I get is a text site. No graphics or fomatting??? My other sites work but not orange? Anyone experiencing the same problem
neuromacer said:
Thanks for the settings, however when I go to orange world all I get is a text site. No graphics or fomatting??? My other sites work but not orange? Anyone experiencing the same problem
Click to expand...
Click to collapse
The browser is probably not returning the correct user-agent string. Unfortunatly the operators decided to use autodetection via this string. Its a right pain because i cant access the o2 pda site either, i get the crappy wap text version
I believe the gurus are investigating it. What ROM are you currently running?
mrvanx said:
The browser is probably not returning the correct user-agent string. Unfortunatly the operators decided to use autodetection via this string. Its a right pain because i cant access the o2 pda site either, i get the crappy wap text version
I believe the gurus are investigating it. What ROM are you currently running?
Click to expand...
Click to collapse
I'm currently using Black V2 with a Radio rom of 1.38.00.10
I've been searching for days to get my internet working on my mobile,
im using a Payandgo O2 Stellar (aka Kaiser) phone
Using these settings..
Access Point: payandgo.o2.co.uk
Modem: Cellular Line (GPRS, 3G)
Username: payandgo
Password: password
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
And basically i cant go on MSN / Google etc, but i can view the O2 website (and some O2 based links from that website), if i try togo anywhere else i get a message saying:
"The page cannot be displayed or downloaded because the connection was lost. Check the connection & try again later."
I've wrote emails etc to O2 but no replys yet, few friends are looking for ways to fix it but not getting any closer to resolving it so was wondering if anyone here has any ideas?
If you search you will find,
Check this out - http://forum.xda-developers.com/showthread.php?t=309108
Here are the setting I use, allows internet access, can't send e-mails or go on messenger, network limitations. Follow the directions from above but use these settings.
Internet settings
My ISP
O2 Active
Cellular Line GPRS
payandgo.o2.co.uk
payandgo
password
MMS Settings
Start/Messages
MMS Config
O2UK
193.113.200.195
9201
http://mmsc.mms.o2.co.uk:8002
My Work Network
100k
wap 1.2
Wap Web Address
wsp://wap.o2.co.uk/
Full internet access
Try this setting:
1.Tap Start - Settings - Connections Tab - Connections.
2.Under 'My Work Network', choose 'Add a new modem connection'.
3.Enter ‘Connection: o2 GPRS’. ‘Modem: Cellular Line (GPRS)’
4.Tap Next.
5.Enter ‘Access Point Name: payandgo.o2.co.uk’
6.Username: payandgo
7.Password: password
8.Tap Finish.
9.Back in the connections settings screen, under 'My Work Network', tap 'Edit My Proxy Server'.
10.Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
11.In the proxy server box enter: 193.113.200.195
12.Tap Advanced.
13.Tap HTTP, Enter ‘server:193.113.200.195’, ‘Port: 8080’, Tap OK.
14.Tap WAP, Enter ‘server:193.113.200.195’, ‘Port: 9201’, Tap OK.
15.SecureWAP : EMPTY
16.Tap Socks, Enter ‘server:193.113.200.195’, ‘Port: 1080’, ‘Type: Socks 4’, Tap OK.
17.Tap OK
18.Tap OK
19.Tap OK
20.Tap X
You are now ready to surf o2 pay as you go GPRS full internet, but you will not be able to use outlook and MSN. However, it's still OK. To open MSN you can download Agile messenger. To access your email, just use the web access. You can only use 5MB for free on O2 PAYG. After that you will be charged.
Wow! it works woohoo, thanks m8 yeah ur right i should have searched but ive been searching multiple websites for days! about ready to hang myself lol
and thanks for the Agile messenger thing, main reason i want to net is to be able to use MSN Messenger so im glad that'll do it ^^
Edit:
Cant get MSN or Agile to connect, net seems to work fine though... ill see if i can find some alternatives
Wow, have also just got a new smartphone, yesterday. Contacted o2 for settings and was given only half the story. Could only get at stuff via wsp and even then loads of links didn't work properly.
Tried your settings and yipee.
Ta a bunch.
Lyv
o2 settings
hey people, i have a quick way to configure wm handsets for o2 data and mms without having to enter in all the settings - install the cab attached...you should get an o2 icon in the start menu, select it and configure. you may have to reboot your mobile quickly to set it up but mine started working immediately - it hadnt even finished installing and ms exchange was already downloading my mail
btw these settings work for payandgo
Thanks for the CAB settings, worked a treat on my Kaiser on O2 pay and go. Spent 20 mins arguing with o2 customer services telling me i had to be contract in order to enable GPRS on my phone !
What a set of loosers, maybe i should email them and send them to this post ;-)
Thanks again !!
Thank You!
Thank you so much or the settings!! I needed them for my job and was starting to think i'd have to get a new phone. I spent over an hour arguing with "customer services" with them telling me i had to be contract in order to enable GPRS on my phone and you proved them wrong! They said because the phone was contract they said there was no way that this could be done.
Thank God i looked it up on the internet and found you can do it and with ease!!!
So thank you millions! Because now i can send and receive picture messages and also go online! I can not thank you enough!!!
I previously was only aware of settings available for WM PDA's to allow MMS and nothing more. I had the required settings for MMS before, but when upgrading to a new ROM I lost them. Used the same settings but this time, they wouldn't work! Just found this thread, now I can send/receive MMS + I can now browse the internet! THANK YOU!!!!!
jaymit said:
hey people, i have a quick way to configure wm handsets for o2 data and mms without having to enter in all the settings - install the cab attached...you should get an o2 icon in the start menu, select it and configure. you may have to reboot your mobile quickly to set it up but mine started working immediately - it hadnt even finished installing and ms exchange was already downloading my mail
Click to expand...
Click to collapse
Great job, jaymit. i haven't tried this cab, but mine was set the same as above and working, except it doesn't allow download data (such as weather updates on today screen), direct push email (IMAP excahnge) or internet sharing. does your cab setting allow these? thanx.
still nothing
hey, just installed cab file... and still nothing... can't send mms
i've been losing hope for sorting out it
works now i'm such a noob(ie)
thanks so much
Thanks
jaymit said:
hey people, i have a quick way to configure wm handsets for o2 data and mms without having to enter in all the settings - install the cab attached...you should get an o2 icon in the start menu, select it and configure. you may have to reboot your mobile quickly to set it up but mine started working immediately - it hadnt even finished installing and ms exchange was already downloading my mail
Click to expand...
Click to collapse
Thanks very much indeed for this cab file. At last my HTC Advantage (WM6) will access the web over the 'phone network. I've tried for months to get sense out of o2 to no avail. Either they told me that O2 didn't support the Advantage or the settings I was given didn't work!
Ixtana_ran said:
If you search you will find,
Check this out - http://forum.xda-developers.com/showthread.php?t=309108
Here are the setting I use, allows internet access, can't send e-mails or go on messenger, network limitations. Follow the directions from above but use these settings.
Internet settings
My ISP
O2 Active
Cellular Line GPRS
payandgo.o2.co.uk
payandgo
password
MMS Settings
Start/Messages
MMS Config
O2UK
193.113.200.195
9201
http://mmsc.mms.o2.co.uk:8002
My Work Network
100k
wap 1.2
Wap Web Address
wsp://wap.o2.co.uk/
Full internet access
Try this setting:
1.Tap Start - Settings - Connections Tab - Connections.
2.Under 'My Work Network', choose 'Add a new modem connection'.
3.Enter ‘Connection: o2 GPRS’. ‘Modem: Cellular Line (GPRS)’
4.Tap Next.
5.Enter ‘Access Point Name: payandgo.o2.co.uk’
6.Username: payandgo
7.Password: password
8.Tap Finish.
9.Back in the connections settings screen, under 'My Work Network', tap 'Edit My Proxy Server'.
10.Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
11.In the proxy server box enter: 193.113.200.195
12.Tap Advanced.
13.Tap HTTP, Enter ‘server:193.113.200.195’, ‘Port: 8080’, Tap OK.
14.Tap WAP, Enter ‘server:193.113.200.195’, ‘Port: 9201’, Tap OK.
15.SecureWAP : EMPTY
16.Tap Socks, Enter ‘server:193.113.200.195’, ‘Port: 1080’, ‘Type: Socks 4’, Tap OK.
17.Tap OK
18.Tap OK
19.Tap OK
20.Tap X
You are now ready to surf o2 pay as you go GPRS full internet, but you will not be able to use outlook and MSN. However, it's still OK. To open MSN you can download Agile messenger. To access your email, just use the web access. You can only use 5MB for free on O2 PAYG. After that you will be charged.
Click to expand...
Click to collapse
You are a star my friend. Out of interest though.... 5MB, in terms of browsing on my phone.... how much is that? How many pages do you think I can view before this 5MB is taken up?
Is this 5MB limit per month as well?
TIA.
Works great on my hermes also, many thanks perfect fix for my issues.
thanks
hey i got it working for like a few hours and then i just get connection errors.
I get the following error.
Cannot Connect
Dialed:
"Cannot connect for an unkown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufactuer's documentation and try again."
Anyone else getting experiencing this?
Its like the net only works for a while and then I get connection issues
Thank you
jaymit said:
hey people, i have a quick way to configure wm handsets for o2 data and mms without having to enter in all the settings - install the cab attached...you should get an o2 icon in the start menu, select it and configure. you may have to reboot your mobile quickly to set it up but mine started working immediately - it hadnt even finished installing and ms exchange was already downloading my mail
Click to expand...
Click to collapse
Worked fine and didn't need to reboot, thank you so much, I'm so happy now.
The problem with the .cab attached is that it uses the proxy that blocks email or has for me when used:
What i use for connection:
Access Point: payandgo.o2.co.uk
Modem: Cellular Line (GPRS, 3G)
Username: vertigo
Password: password
DNS: none
Alt DNS: none
Get emails haven't played with MMS setup as was just happy to have emails
With settings in this thread can't get MMS to work gotta be a way "but if i have to choose email or MMS" i know email is the more used
HOW?
jaymit said:
btw these settings work for payandgo
Click to expand...
Click to collapse
HELLO I SEE YOU PUT THIS CAB ZIP HERE I WAS WONDERING IS THERE ANYTHING LIKE THIS FOR A CHINESE MOBILE I GOT THE NOKIA N97C i need my wap and all set up please help me its driving me mad
p4rma said:
hey i got it working for like a few hours and then i just get connection errors.
I get the following error.
Cannot Connect
Dialed:
"Cannot connect for an unkown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufactuer's documentation and try again."
Anyone else getting experiencing this?
Its like the net only works for a while and then I get connection issues
Click to expand...
Click to collapse
Getting this also (on WM6.1/Samsung OmniaII). Followed both guides and tried all sorts of combinations (even the idata.o2.co.uk that the iphone uses) and still no luck. These settings are specified for the proxy'd "work" connection. "Direct Internet" works fine with AS.
p4rma said:
hey i got it working for like a few hours and then i just get connection errors.
I get the following error.
Cannot Connect
Dialed:
"Cannot connect for an unkown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufactuer's documentation and try again."
Anyone else getting experiencing this?
Its like the net only works for a while and then I get connection issues
Click to expand...
Click to collapse
I use these settings and have done for about a year or so. I sometimes get this problem and although I have credit, it seems to go away if I top up. Not sure why but it fixes it every time
Hi all,
I've got my sim-free HD2 from superetrader uk. But after inserting my o2 sim, I got a really big problem that I can't get to web!!
I used "O2" network settings found by HD2 automatically. But it always said
"Cannot Connect
Dialed: mobile.o2.co.uk
Cannot connect for an unknown reason. To check your connection...blahblah"
when I tried to access 3G.
I've tried many ways suggested on the internet, including removing username and password in the connection settings, adding DNS ip, and even using hard reset. But thay can't work at all.
But my sim does work well(accessing 3G) in my HTC HD(that rom supports 3G and connection settings are with blank username, password and DNS).
I nearly suspect there is a manufacturing problem with my phone.
Plz help me! I've struggled for 2 days and gonna explode!!
THANK YOU VERY MUCH!!
To find a solution, please go to #6. Thanks!
can you try to go on the o2 site using your pc and download the settings to your phone via mms/sms
are you a payg customer
are you using pay as you go?
if so on my mates phone on O2 it downloads the wrong connection settings when it does the automatic setup and you need to edit them to get it to work
Find and edit the right name for your accesspoint.
At german o2 it is APN (Zugriffspunkt) : webmobil1
Thank you all!!
You helpful guys all hit the point!!
Exactly I am a pay & go user.
After I got your replys, I asked my friend who also uses O2 pay&go with S1. He told me a different APN. Then I tried and it worked!!
So it's right a wrong access point name setting problem.
THANK YOU ALL VERY MUCH AGAIN!!
Here are my correct connection settings for UK O2 PAY & GO USER WITH A SIM FREE HD2 if you undergo a pain with accessing internet:
Settings - Wireless controls - Menu - Connections - Add a new modem connection
[you can delete all other connections first if you only use o2 mobile internet]
Enter a name for the connection: mobile web (whatever you like)
Select a modem: Cellular Line (GPRS)
Next.
Access point name: payandgo.o2.co.uk
Next.
User name:
Password:
Domain:
(These three items are all left BLANK)
Advanced...
(Just use the default settings)
Finish.
OK.
OK.
Close.
Now it works.
Alternatively, you can use automatic config by choosing O2 from network database of HD2. Then you can just manage the connection "moblie web" by changing access poing name to payandgo.o2.co.uk and deleting both username and password.
Hope that's clear!
Thank you loads! I was having the same problem and thanks to this post I managed to sort it! Nice to know the automatic O2 settings thing works about as well as a chocolate teapot!
Again thanks