Hi !
I'm french, and today I want to change my Touch Screen (the Black part with the four buttons, the HTC logo, etc...) but with my new touch screen there isn't the notice to dismount this touch screen
Somebody knows how to do that ?
Thanks and sorry if my english isn't perfect...
http://www.megaupload.com/?d=K0AHA2T0
?
ohhhhh !!! THANKS !!!!!!!!! all is OK !
I read the manual, but I have some problems to disassemble the phone... in fact, when I try to insert the flat plastic stick between the housing and
Antenna cover to release the hooks, as it is explain in the manual, it doesn't work at me... I try, but nothing move... i don't know how do that.
If somebody already did that, help is WELCOME
Thanks !
Just a question - please don't get me wrong
Have you considered opting for HTC service center as it might be risky to unmount HD ?
Related
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
hello
do the screen alignement , it helped for me
grtzzz
you can find this in settings___system ___ screen and choose align
Like I said, I already did the re-alignement. But it didn't solve my problem.
touchscreen problem
hello,
u can try to update the rom , maybe that could be a solution , you find it in the wiki of the prophet on how to do it
grtzzz
grey
dizzy33 said:
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
Click to expand...
Click to collapse
Well it is very likely that your touchscreen is damaged but not your LCD. There is actually 2 portions to the screen which most ppl assume there was only one(well I did initially until finding out later when my screen broke and got it replaced). Anyway, if you've tried re-calibrating it and doesn't work..maybe your screen protector (if you do use one) maybe be at fault? Other than that, worse case scenario, it is your touchscreen that is physically damaged. FYI it is not really expensive to replace compared to the LCD part.
Speak to njbridges if you need to get it replaced.
http://forum.xda-developers.com/showthread.php?t=323981
I already upgraded the ROM to latest french version ... It didn't help in that.
Anyway, thanks a lot for your answers !
I had the same problem. Unfortunately it was a problem with the touch screen which was fixed under warranty.
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
beer2nd said:
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
Click to expand...
Click to collapse
Hello.
I tried to do that, because I had problems to align screen.
I changed the touchscreen with another from a broken LCD. But now all I can get is a white screen, then a sound (like the starting sound when you make a hard reset or remove batery) and after black screen again.
What can I do to bring it back.
I've noticed that the touchscreen had some white glue where is the connection with the LCD. Do I need to replace that glue, maybe is a special glue with small voltage conductibility ? Or ? Help!
Anyone changed the touchscreen ?
PS: I think I will start a new post, maybe I will get some answers!
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
P4k1t0 said:
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
Click to expand...
Click to collapse
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
saxxen said:
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
Click to expand...
Click to collapse
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
P4k1t0 said:
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
Click to expand...
Click to collapse
When you say cut it means that a part of the conectors still remain on the touchscreen (under the touchscreen). Or no conectors at all on the touchscreen and that means you removed the connectors (pulled out).
Do you know if I have any chance to take another touchscreen from a defect device and work ?
i have a Swisscom XPA v1605 (htc tytn), and i had wm6. On wm6 I have problem with touchscreen on start button, a I hardreset the phone. After that my touchscreen does't work, and I can't calibrate screen and continue with starting up guide....What sould I do??? Someone answer PLEASE....
Reply
check that the front bezel is not dented and suppressing the touch panel around the sides, if not,,, you will need to replace the entire lcd...
also check if there are any objects( sand, pocket lint) stuck between the touoch panel and bezel.
I think, is there any posibility that the rom is false, becouse that phone should have wm5. Lcd is workin fine , but I can click on calibration. was I mentoned that the phone was wokin fine before that happen.(HARDRESET)
Try reflashing the ROM, I had a similar issue where it just stopped working and re flashing was the only cure.
how I do that? sry guys ,but I am brand NEW in this thing.....
Did the device come from Swisscom with WM6? If so your probably best contacting there support about it, they may be able to give you the download location of the rom. If not try reading MR Vanx's upgrading guides on here which will walk you through flashing the device. http://forum.xda-developers.com/showthread.php?t=299462
thx man u r awesome............
No problem as long as you follow it through you should be ok.
Good luck
I have a problem with my herms 200...
it's my toutch screen... it doesn't work, evry time i touch the screen it open the windows bar, if i touch in the clock it opens the windows bar... i already try the calibration option, but it doesn't work too... i touch in the 5 point like it ask and it apears again, i touch the 5 points and it apears again, and again, and again...
what can i do??
pleass someone help me!
ps: i already try to update but it doesn't work too...
thanks...
ASGM
You have to take the unit apart, and re-seat the screen. It's a problem affecting me too.
Or the digitizer's about to die, You may need to replace the entire LCD. Happened to me too, started with little alignment problem that ended with no touchscreen...
Take my advice, download remote screen alignment. It allows the alignment info to be recorded to the pc so you can skip the alignment procedure after flashing a rom.
You can navigate by buttons for most things but its a *****. This is a stopgap so you can use your Hermes until you replace the LCD...
Cheers...
ultramag69 said:
Or the digitizer's about to die, You may need to replace the entire LCD.
Click to expand...
Click to collapse
I just installed my repacement screen last week. Can you post the link to the remote tool that you use?
Nokia 3650 said:
You have to take the unit apart, and re-seat the screen. It's a problem affecting me too.
Click to expand...
Click to collapse
I have seen this web site: http://inuchanbt.blog54.fc2.com/blog-entry-100.html
I have done everything there's asking to do, but that haven't work... now i have uploaded a new OS version to my herms and a can turn it on, cause i need to align the screen and i cant do that... :HELLLP:
I have uploaded a movie on youtube, with me trying to align my screen after turn on my herm... http://www.youtube.com/watch?v=TiHXEOPHPq8
thanks a lot.
ps:sorry about my english... im portuguese.
ultramag69 said:
download remote screen alignment.
Cheers...
Click to expand...
Click to collapse
Try google...
hello
Long time reader,first time writer
4 days ago I spilled cleaning chemicals to the display HD 2 works correctly except that the chemical stains on display are present
Is it possible to repair device without replacing the display, or something more?
If the answer is no, please, what is needed to replace
Thanks in advance
Sorry for my bad English
i think u have to replace the digitizer.. just google for htc hd2 digitizer and u will find something
i dont know if there are methods to repair that screen.. i dont think so :/
there should be picture .....
white spots are present all over the screen,could it be cleaned ?!
Hi ,
My Touch HD has problem after i talked in rain. Maybe some rain got inside the phone. The problem is no response when i touch the screen. It can properly boot up and I can see the windows screen. I want to know is it the screen problem or another components damage?
Thanks in advance!!
vxxxxx
vxxxxx said:
Hi ,
My Touch HD has problem after i talked in rain. Maybe some rain got inside the phone. The problem is no response when i touch the screen. It can properly boot up and I can see the windows screen. I want to know is it the screen problem or another components damage?
Thanks in advance!!
vxxxxx
Click to expand...
Click to collapse
Nobody can know if that's the problem, maybe some pic's would help? I'm not a masterpiece in hardware talk, but probably the screen digitizer is broken (since there is no response). If you can switch the digitizer, there's some for 30,00 € in e-bay :/
Oh, did you install a ROM recently? Might be a bad flashed one