hey guys my problems prophet
on-off button doesn't work (actually work when doing hard-reset and bootloader mode).
I install any rom and i see this problem every rom.
After the soft resets " Warning Device will be off, and may lose some data. Do you want to continue" and on-off button doesn't work.
And i have a bluetooth problem. It's work like infrared port. the bluetooth device must be near (about 50 cm) of my prophet.
What must i do?
Related
Hi,
I've a Qtek S110. Last saturday it did a hard reset, while it was in my pocket.
Now the up, left and enter (middle) buttons of the navigation stopped working. down and right work as usual.
I tried..
- install the latest usable roms (1.12.00 WWE / R1.13.00 / E1.12.550WWE).
- searching the register
It may be a hardware issue, but further its working as usual.
Is there a way to solve this? should i try to open it and clean the button contacts (if there are any?)
It could be that during the hard reset those buttons were pushed, since it was in my pocket. Than it is a software issue right?
Anybody any light on this issue?
A ROM update is followed by a hard reset which should clear out anything software related.
I only had the back cover removed so I dunno whether further opening the front would help. :?:
Well it could be a software issue.
There are also problems with hard resetting and sound, if the earphone is plugged in (search for no sound).
Then the device 'remembers' the status of the earphone not correct. So maybe the buttons were pressed during hard reset, and the device remebers the button status?? just guessing...
Okay so I think I know at least A solution but I'm hoping that someone here will be able to suggest something besides a hard reset.
I've got a Cingular 8125 a couple of weeks ago. Flashed it to the latest imate rom. I kept it from installing the custom imate stuff but did install some of the Cingular cabs.
Now I'm having a few problems with the phone. It's quite a list.
A) I can't enable wifi at all. At one point I could but the phone locked up on me while I was trying to resetup my connection. I had no choice but to soft reset it. Now I can't enable wifi at all. If I click on it in the comm manager to turn it on it will sit there with the spinning wheel like it's enabling then go back to the same icon with the x on it. I've tried turning flight mode on and off, etc but nothing seems to help it.
B) the phone HAS been locking up. It will just sort of freeze and stop responding. Sometimes I'm able to get to the memory settings in control panel and still have available memory (it's usually been around 16 MB of program memory when this has occured) but even so closing everything will often not help. Even if it unfreezes then it will usually do so not much later and often it just won't unfreeze.
C) sometimes I can't close out the phone application. This seems to happen when Magic Button is running. I click to close it and it goes from the phone to my call history. Closing that goes back to the phone again. I can't get to the Today screen. Pressing the red hangup button would sometimes fix it but usually not.
D) voice command is REALLY wonky using my BT headset (Scala 500). Okay, I know it doesn't officially work with BT headsets and I could live with that. But why does it have to be so damned random?
1) Sometimes pressing the button once will get me the chime. Usually it just gets me a lower pitched tone. If the first press doesn't get it then typically a second within a short time will. Sometimes it takes three though.
2) At one point the phone would usually play my selected ringtone and announce the incoming call over the headset. Other times I would only get the default incoming call sound on the headset and the phone and voice command announcement are over the phone speakers instead. In the last couple of days I've ONLY been getting them from the phone.
3) While typically when I'm using the headset with voice command the feedback DOES come over the headset, sometimes it gives me the confirmations from the phone instead
I think there were a few other flaky issues too but this is the majority of them. Also many of them were present before the rom upgrade so I don't think it's responsible for most of it.
edit: oh, one other thing is that after the ROM upgrade I can't get the default input to stay on anything but keyboard. Even if I change it, I turn around and it's back to keyboard again. I'm thinking, though, that there's a reghack for this?
*bump*
===A) I can't enable wifi at all. At one point I could but the phone locked up on me while I was trying to resetup my connection. I had no choice but to soft reset it. Now I can't enable wifi at all. If I click on it in the comm manager to turn it on it will sit there with the spinning wheel like it's enabling then go back to the same icon with the x on it. I've tried turning flight mode on and off, etc but nothing seems to help it.==
I have the same problem with you. Can anybody help?
any solutions i have the same problem
Try this: back up your PIM, then flash phone back to OEM ROM (cingular, t-mobile, whatever it is for your model). Then unlock it again (if needed), and flash the ROM again. If it's still garbage, try reading the thread for the ROM you loaded (chances are you're not the first to experience this problem, and the other testers of that ROM may offer solutions). If it's still garbage after all that, consider using a different ROM altogether. CRacing's CR86 Touch HD and SVI's ANGEL are both quite nice, and VERY reliable for functionality.
I've search through:
Gaijin Guide for x01HT
Video Call Button
Hermes Wiki
A bunch of searches have come up empty.
Softbank x01HT
Using Pays Rom WM6.1
or K's Pro rom
Call Button OK.
The Video Button and End Call button however do not work (screen menus work fine)
Any suggestions?
Any suggestions
Buttons not working
If a button stops working, yet you know the functionality still works, then I'd suggest a battery reset. Simply remove the battery from your 8525 (must be completely out) for about 15-20 seconds, place it back into your 8525 and turn it on.
I had to do this back when I had iPAQs and Dell Axims, and have to do it with my 8525 from time-to-time when my camera button stops working. This performs a hardware reset. As long as your battery is in your 8525, there is essentially power flowing within the 8525, even though you have the screen turned off. By doing this, you're allowing all power to drain from the 8525's circuit cards/boards and performing a hardware reset (whereas using the stylus only gives you a software reset).
I hope this helps you!
Thanks. No dice (sorry for late reply).
Changing the os to AT&T clears up the call / end button. The moment I load a homebrew like pays, TnT ... The call/end/video buttons stop.
Very Odd.
Hello.
Problem with SPV M5000, power button don´t turnd device off
Vhere is the problem can be, soft or hard?
Thanks!
MazdaGTI said:
Hello.
Problem with SPV M5000, power button don´t turnd device off
Vhere is the problem can be, soft or hard?
Thanks!
Click to expand...
Click to collapse
Hardreset and try, if not reflash ROM
Good luck,
Hard Reset I tried earlier but did´nt work.
You do realise the SPV doesn't actually 'switch off' ?
Your power button will merely switch the display off and send the unit into sleep mode. If you want it 'off' you'll need to pull the battery and put it back in. The unit won't power up again until you press the power button.
Sometimes my screen goes blank, other times I can still see the text etc.
I started to use a shutdown exe from my Wizard. It seems to do a better job.
At least, when my Uni is connected to Windows Mobile Device Center, I hit the power button and the backlight goes off, WMDC stays connected. If I use the Wizard's exe it disconnects.
Attached for you to try anyway.
Thanks
If I understund right, this PDA can turn off only with removing battery thats stranger
I've never understood the reasoning behind it either. I suppose you have to consider that it was probably always intended for people to use these as their main phone (I don't - never have) and most people never turn their phones off. I know my main phone is never off. Still, it DOES have the option to turn it off if need be, whereas the SPV only has a sleep and flight mode.
Did you try the exe?
Suddenly my elf gone crazy :X
The phone started thinking by his own. I solve the problem with the 'Clear Storage' option in the settings.
(I was unable to perform Hard Reset because my buttons refused to work).
OK, now all is back to function normaly except the buttons still isn't working (except the power button).
Some one knows what should I do?
up!
I tried to update my rom to higher version (WM6.1)
works fine, but the buttons still doesn't work :/
Someone? Please?
upupupupupup