I've search through:
Gaijin Guide for x01HT
Video Call Button
Hermes Wiki
A bunch of searches have come up empty.
Softbank x01HT
Using Pays Rom WM6.1
or K's Pro rom
Call Button OK.
The Video Button and End Call button however do not work (screen menus work fine)
Any suggestions?
Any suggestions
Buttons not working
If a button stops working, yet you know the functionality still works, then I'd suggest a battery reset. Simply remove the battery from your 8525 (must be completely out) for about 15-20 seconds, place it back into your 8525 and turn it on.
I had to do this back when I had iPAQs and Dell Axims, and have to do it with my 8525 from time-to-time when my camera button stops working. This performs a hardware reset. As long as your battery is in your 8525, there is essentially power flowing within the 8525, even though you have the screen turned off. By doing this, you're allowing all power to drain from the 8525's circuit cards/boards and performing a hardware reset (whereas using the stylus only gives you a software reset).
I hope this helps you!
Thanks. No dice (sorry for late reply).
Changing the os to AT&T clears up the call / end button. The moment I load a homebrew like pays, TnT ... The call/end/video buttons stop.
Very Odd.
Related
If I check in "Settings-System-Power-Advanced-On battery power" to turn my JAM off if it is not used for some time (e.g. 3 minutes), it goes off and then I can not turn it on. I tried to push/hold power button, nothing helped but soft reset. If I turn my JAM off manually by pushing power button I can turn it back on manually too. But after 3 or 4 times it acts just like it was turned off automatically, i.e. iregardless if I push or hold power or any button, LED flashes green and the phone does not turn on. The worst part of it is after I push Power button trying to turn my JAM on and LED indicator starts flashing green (and JAM still remains off) if somebody tries to call me he hears the signal as if my phone is ringing (not busy signal or "The number you dial is not available right now" etc.)
Does anybody know what the problem can be? I've got this problem even after hard reset with no third-party applications installed.
non functioning of on/off switch
Check the connectors of your battery on the inside of the JAM. I had the same problem and I found out that one of the connectors did not really "touch" the battery.
I checked it. The contacts on the battery look like they were scratched by contacts on the phone, so I'd think the connectors are in good contact. I even tried to put a small piece of paper between the battery and phone bodyon the left side to make sure it is really pushed to another side, it did not help either
JAM does not turn on after being turned off
Did anyone ever find out the answer to this??! I have the same problem with mine except it's a bit random - mostly doesn't turn back on again after an auto power off for a long(ish) period of time - like at night.
sounds like a possible fault is occurring. Best thing is to do a full backup of your system and then do a hard reset your device and see if the same thing is still happening. If it is, try the positioning of battery as suggested in earlier posts and if still happening, then a handheld service is required
T-Mobile MDA Compact
T-Mobile ROM
R 1.12.00
G1337.42
D 1.13.00 WWE
Quirky prob. The directional buttons, center button, and the contacts button all don't work at all. Odd. I opened the casing with the 'bad sound' tutorial as a guide, cleaned the contacts, no effect.
Strangely enough, the call and end call buttons weren't working either till who the heck knows what I did. Now thery work perfectly.
I mean honestly, this is some supernatural behavior. Tempermental hardware buttons? I need Scully on the scene now.
I can work around it, but can think of other things I'd rather do... like use the phone normally.
Not expecting much, given the strangeness factor(tm) but any help much appreciated.
did you use TCPMP?
i've had same problem after this player.
No TCPMP, or atleast...
Not that I know of, unless it's gets installed by default in the extended rom.
Here's another strange bit of behavior. Every 5 mintues or so, the 'contacts' button gets 'virtually' pressed twice. Whatever is assigned. Even though tHe button itself doesn't seem to work
Furthermore still, after the phone comes back from standby, the call and end call buttons don't work until I press another button first. Then they work fine.
So farm the directional pad doesn't respond to anything, neither one in the middle.
I don't know whether it's a hardware prob or software at this point.
Phone has both wwe and radio 1.13 and all the extended t-mobile apps intalled.
.l
I have my P3600 since Saturday and I updated it with the latest ROM which included the GPS.
Now I’m having problems with the power settings and functionality. I search all the threads for solutions but no similar problems are described so I post a new thread.
Problem 1:
The power settings are: backlight off after 30 sec. power off after 1 min. (on battery power). After 30 sec. the backlight dims to the lowest setting but the device does not switch off after 1 min (or any time for that matter). This is a huge drain on the battery! I can switch off the device with the power button but once it turns on again (e.g. while receiving an SMS or email) it stays on with the dimmed backlight.
Problem 2:
Using a Bluetooth headset and the media player the player pauses when switched of with the power button. This means just listening to music for around an hour and the battery is completely flat. My previous device was a S200 and that worked fine (could be switched off with the power button).
My guess is that both problems may have simple solutions so I’m asking you all to help me with this.
Thanks in advance,
Stefan
niobium said:
I have my P3600 since Saturday and I updated it with the latest ROM which included the GPS.
Now I’m having problems with the power settings and functionality. I search all the threads for solutions but no similar problems are described so I post a new thread.
Problem 2:
Using a Bluetooth headset and the media player the player pauses when switched of with the power button. This means just listening to music for around an hour and the battery is completely flat. My previous device was a S200 and that worked fine (could be switched off with the power button).
Click to expand...
Click to collapse
Well for problem 2 you haven't searched enough! Anyway you should not use the power button; go to the Windows Media player settings and map the "Toggle screen" function to a hardware button. Then toggle the screen off when you play music.
Regarding your other problem: what software have you installed? Have you got this problem on a freshly upgraded phone?
The solution you propose for problem 2 probably works for other devices but not for the Trinity. You can only assign buttons up, down, left, right and enter and they are needed within the player for obvious functions.
Problem 1 after fresh ROM update but right after that I installed TomTom 6.
I might try a new ROM update and check but rather as last resort...
niobium said:
The solution you propose for problem 2 probably works for other devices but not for the Trinity. You can only assign buttons up, down, left, right and enter and they are needed within the player for obvious functions.
Click to expand...
Click to collapse
It works for the Trinity too. You can also assign other functions to buttons if you keep them pressed. Toggle screen is assigned to "Hold Down" in my case. So if I press down once I decrease the volume, if I keep pressed I toggle the screen.
As to your first problem; i'm having the same problem too...
To narrow it down a bit; my device turns off (to standby) just like it should when i just briefly check the time or something and then put it away with the todayscreen on (so with no aplications running except some today-plugins ofcourse). However; it DOESN'T go back to sleep when the system has given any sort of notification, like a missed call or a received text-message or reminder for a calendar-item.
So my best guess is that it has something to do with the databases notification que (where WM2003/CE 4 had the problem of overflowing this notification que).
It's really anonying the hell out of me too, cause it really drains the battery fast if you don't discover it soon enough...
As for problem 2; map the screen-toggle to pressing the silver 'enter'button.....that workd great for me. By the way; i'm tinking about getting the new wired media remote control HTC is releasing shortly (check this link). I wonder if these buttons will be mappable.....
Edit: just as i posted this, i received a text message and this time it nicely turned back to standby (ie turned of) state when i didn't check it right away. I did however soft-reset last night before going to sleep. So i really do think it must be in the notification que somewhere, as PocketPlus will still clear that everytime i soft reset. Anyone having the same problem exactly as described ?
Well I found my phone again on after I received an SMS and this made me decide to completely reinstall the original ROM (including the GPS).
Step by step I installed all the applications (and tested the device in between: I started some programs and got some notification).
So far the result is that it all works fine now.
The difference might be the different ROM (from smartmobility.nl in stead of europe.htc.com although the version is exactly the same).
For problem 2: I unmapped the button 1 (was speed dial and moved that one to press&hold). In media player I mapped the button to ‘toggle screen’. I still like the S200 for this better because it only kept the media player & Bluetooth alive so that’s the best for preserving the battery…
niobium said:
For problem 2: I unmapped the button 1 (was speed dial and moved that one to press&hold). In media player I mapped the button to ‘toggle screen’. I still like the S200 for this better because it only kept the media player & Bluetooth alive so that’s the best for preserving the battery…
Click to expand...
Click to collapse
Hmmmm....i do the screen-toggle everytime i use it as a musicplayer, and i get considerable good batterylife....
However, i'm not using the BT headset anymore cause the volume was too dim...i'm using the 3,5mm adapterplug now. But batterylife with bluetooth was about the same when i used it.
After all the work yesterday, this morning the problem with not going to standby occured again!
But now I know more. It happened only after I added some sites to my RSS feedreader.
I use pRSSreader from David Andrs (http://pda.jasnapaka.com/prssr/)
Using the 'update settings' with 'automatically connect' the program tries to create a notification on the today screen if new messages arive.
This notification process is the problem. If I switch it of and soft-reset, the device works fine again.
I will mention this problem to David Andrs...
I hope this will help you as well.
It first started with the blue light blinking, even with the phone turned off. The only way to stop it from blinking was to remove the battery for about 10 seconds.
Then, everything I typed staarted to ddoublle letteers raandomlyy.
Now, it's acting like the down button is stuck. I can't do anything on the phone because its always scrolling down, beating out any other input.
I can live with the first two, but the third one has made the phone completely unusable. It's never been around water, never dropped, just randomly doing this crap. Any ideas on how to fix it? Hard reset does not work, new rom does not work, its a hardware issue.
Yes it is probably a hardware issue. Time for a phone swap
I'm actually out of warranty, so the only thing I can do it either switch to a different phone or try fixing this one. Have nothing to lose by opening it up, just wanted to see if anyone else has fixed it by cutting any wires or connections on the inside of the phone.
You don't have insurance
drewcam888 said:
You don't have insurance
Click to expand...
Click to collapse
No phone insurance. Verizon completely screwed me on that phone purchase in more ways than one. By the time I figured that out it was to late.
TO bad I got mine added late. I just called the lady I bought the phone from and she added it.
Not sure about the blue-light.
I was able to fix my repeating-letters using the keyboard fix in this post:
For the constant-down input - it could either be the touchscreen digitizer or the hardware keyboard. YouTube has a series of videos on dismantling the Mogul - it may be worth some "exploratory surgery" to see what might be causing the problem (cookie crumbs, perhaps)...
Hope this helps. Good luck.
Htc mogul hardware button - issue
Dear XDA GURUS,
I am facing this very weird problem on my HTC MOGUL. All my Hardware button have stopped responding / Working. Please help me sort out this issue.
Waiting for your valued reply with solution.
Detail given on below link.
My HTC MOGUL HARDWARE Button Issue
Dear XDA GURUS,
yesterday i tried to do some RnD for this same problem. now the inputs. (Nothing technical)
* Even though my camera hardware button is not working, but, i can still enter the bootloader screen.
* Even though my both soft reset hardware button are not working, but, still i can do the hard reset.
This only means that, my buttons are working fine, but, according to my logic, they have lost there assignment.
After that i started searching web, if i can find a App / setting / hack / register setting, in which i can assign then there original key setting. So i found this on XDA forum as below.
Code:
[B]How to assign a shortcut to EndKey, SendKey, Power Button, PTT Button!![/B]
Hello
Since some of you guys asked about this , well there you go:
if you look inside the keyboard driver with a good disassembler (IDA Pro) you would see that you can create these link files :
Long_PTT.lnk (push to talk button+long press)
Long_End.lnk (the read key+long press)
Long_Send.lnk (the green key+long press)
Short_PTT.lnk (push to talk button)
Long_Power.lnk (Power button +long press)
Short_Power.lnk (Power button)
So basically all you need is to create these link files and put them in to windows folder. You can assign these keys to any shortcut you want .
Source: http://forum.xda-developers.com/showthread.php?t=356322
ok now, certain things are clear. now anybody out there can help get this thing sorted out.
Waiting for concrete solution.
Hello there, I am quite new to this forum, only being a lurker for quite some time. But I have decided to join because I am in dire need of help. My MDA/Wizard has suddenly gone out of control. I have had Mobile 6.1 installed on it for years with no problem, and the .cabs I have are working fine.
Now, recently, my phone has acted in a very unfavorable manner that has even caused me to hard reset it to it's original state, with still no luck. On about three different occasions, my phone's lights, keyboard and face, have gone off, and stay on until the phone locks. The main buttons, (Directional arrows, Exit, Call, Internet Explorer, and Mail) do not function unless I press a top right hand corner button on the keyboard twice. From there, it slightly functions. When I quickly press the power button and press it again, the phone will enter its mail area. Doing this again opens up internet explorer. Pressing the center button in the directional pad causes the screen adjustment function to suddenly appear. The keyboard can barely function.
I have no idea what's causing this, any help please?
try getting the newest hard spl and flashing a new rom. maybe your rom got corrupted