See the following thread:
http://forum.xda-developers.com/showthread.php?p=3598841
(If you have any insight into the question, please respond there or here. Thank you.)
you have ms stack you can install the broadcom stack but one mast edit all exe and dll to fit your ipaq bt com port
and it isn't reg velue ...
can you transfer files between the ipaq and se?
Related
Any chance of getting BT stack for Blue Angel to work for Himalaya and where to find?
do a search for vidcomm in the forums
and you'll find a place dl the cab files for it
Widcomm BT manager
Anonymous said:
do a search for vidcomm in the forums
and you'll find a place dl the cab files for it
Click to expand...
Click to collapse
Thanks for the direction. I was wondering, is there a chance to uninstall the same if it does not appeal?
not sure when i wanted to remove it i did a hardreset
and restored an activesync backup that i had taken before i
put on the new bluetooth stack
Can somebody be fair to say in which condition they succeed to make it work with XDA II / QTEK 2020. I have tried to install widcomm stack as explained in other thread http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
But with 2.2 or 2.06 rom I only get not enough memory when I try to start it.
So which version of Rom, Radio and Extend can be used with widcomm BT stack. and does it really work with HD ipaq BT Headhones ?
Thank you
i dont believe that any of the bluetooth stacks support a2dp which is as far as i know required to get stereo sound to such a headset
Ipaq Bluetooth headphones does work with XDAII
I have made it worked with XDAII, but you have to use either Widcomm stack version 1.0.0.3500 or 1.5.0.2000.
My ROM version is 1.72, Radio 1.17 and my own Customized Ext. ROM. I did try it with 2.2 ROM but the BT stack is a bit unstable (every now and then it reported not enough memory, especially when you have lots of thing loaded on Today screen) so I downgraded back to 1.72.
I also had this headphone worked with PC using IVT Bluesoleil stack.
Thank you I will try to downgrade again to 1.72. rom.
Is it possible to post me the complete reg modification I am not sure that in the thread wher I got the widcomm stack http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
it is a complete and I expect to be the reason of the memory trouble ?
Another fact is that I am using a french version of 1.72 ??
Thanks for any help
The complete reg modification is on this page:
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
Cheers,
I finally succeed to install the widcomm stack with Stero Profile . The way I used is :
1) Remove [HKEY_LOCAL_MACHINE\Services\BTIcon]
2) Remove [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
3) Reset
4) install "Broadcom Widcomm 1.5.0.0801 PPC.cab" which is somewhere in the forum
5) copy all the files of Widcomm 1.5.0.200 in windows directory
6) Install Platformxxx.reg
7) reset
8) Install "Broadcom Corporation BT-PPC AV.cab" included in the file I found in the forum in "Broadcom Corporation BT-PPC AV.zip"
And now I can pair and use HP BT stereo Headphones whitout anyproblem on any version of the Rom.....
Just buttons of the headphones are not working is it the same for all ?
and Headset profile doesn't work anymore whith my BT Headset.
I will try with my BT GPS and BT Stowaway Keyoard and Mouse.
I want to use my Magician as a wireless modem over bluetooth with my laptop, but it isn't working... Now I use both windows and bluesoleil stack on my device.
With windows stack I try to use Wireless Modem utility, but without success (I can't see DUN profile on my device with laptop)... In a bluesoleil stack I was trying to select different COM ports in DUN preferences but without success too...
What can I do with this trouble?
P.S. Sorry for my bad english.
Did you use the A2DP extension patch for your MS Stack? If so, the Modem isn't available there. You need the original stack for the modem to work.
Yes. I'm using it.
I'll try to restore original state (but I feel it's a bit problematic...)
Yes. The only one solution to restore original stack was a hard reset. For now DUN is working correctly. Many thanx.
Hi everybody
Some posts ago I asked questions to find right parameters to connect with my BT 77 bluetooth GPS.
Using VisualGPSce I finally found COM5/38400 as parameters to connect with. Knowing that, I used Via Michelin 4.4 with those parameters and wait ...
Some minutes later I obtained the satellits signals in the GPS test screen of ViaMichelin but after that ViaMichelin got frozen.
I'm near the goal but something is missing.
Thanks for your help.
Appareil QTEK 2020
ROM 1.72.02FRA
RADIO : 1.14.00
PROTOCOLE : 1337.24
EXTROM : 1.72.603
Bluetooth driver Microsoft or Widcomm
I'ts me again
I tried to replace the Microsoft drivers by the Widcomm ones with a .cab found on the net.
1 : Delete of key HKLM\Services\BTIcon to uninstall Microsoft drivers
2 : Install of BluetoothGPS.cab to install Widcomm drivers
It has been great during one hour.
Via Michelin 4.4 was OK with my GPS BT77 on port 7
After that I got "Bttray : "the BT radio failed to turn on due to insufficient driver memory available" and "BTTrayCE BT could not be correctly initialized".
Of course memory is actualy not concerned.
Then it has been impossible to turn bluetooth ON without obtain the message "BTTrayCE BT could not be correctly initialized"
I think the .cab to install Widcomm was not good because during installation I got messages about the fact that e-PocketSetup was not a valid official version.
Is it possible to find a good installation for Widcomm drivers (or others) for Windows CE 2003 ?
The problem is this Microsoft driver for Bluetooth.
How to find another one ?
Thanks
Hi!
I've googled all day long to find a working tutorial to install the Microsoft bluetoot stack in Vista. I've tried everything but nothing helped. I try to write a bluetooth application to communicate with my pda. It's absolutely necessary to install the MS bluetooth stack so please help me!
Thanks!
i believed it was nativly a part of vista it sure is on my hp laptop
on my thinkpad there's the broadcom but i want to use the ms stack. there are possibilities to change that but i don't exactly know how that works! the problem also is that i can't really chose the driver i want to because the auto installation can't be aborted!
i want to write an application with the 32feet library and i have problems with the communication between the pda and the laptop and i think that it is caused by the wrong stack!
Does nobody have an idea?