Related
Hi all, this is my first post on this forum but I've been reading for a while to educate myself.
I've got a Herm200 that I've been trying to troubleshoot but to no avail. I'm fairly certain that it has a hardware problem but I haven't been able to isolate anything.
Here's whats happening:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
When the screen turns all white a soft, hard, or stand-by cycle will not always bring it back to life. The fact that the hard reset wont always fix the problem makes me think it's a hardware issue since the phone will boot-up with the the all-white screen.
This is incredibly frustrating especially since HTC wont accept any warranty claims in the USA on the Tytn.
At first I thought this might be a problem with the ribon connection between the screen and the base but i haven't been able to confirm or discount anything at this point. I have yet to find a way to consistently reproduce or rectify the problem so it's very hard to troubleshoot.
I pretty much have to take a second phone with me everywhere right now just incase i need to make a call. Please help! Has anyone ever encountered such a problem?
Thank you in advance!
SneezyRobot said:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
Click to expand...
Click to collapse
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
wow... that sounds like exactly what's going on here, I actually even tried to disassemble it lastnight but didnt have the right driver set. thank you for the advice!
I'll look for one of those sets but what would you search for if i needed to find it?
Thanks again, I just got a set off of Ebay. Hopefully it'll be here next week
With any luck it'll be a connection issue.
I have had the exact same problem. Because I got the Tytn through work I made our IT department handle the issue and I am currently waiting for a replacement and to find out what happened.
Yep, it looks like the problems the OP is having are very similar to the problems we've been having over in this thread:
http://forum.xda-developers.com/showthread.php?t=291027
I'm beginning to think it's a hardware problem as well but not entirely sure.
People in the above thread mentioned that using the scroll wheel a while then moving back to use the D pad fixed the problem (very briefly in my case.) Once I use the center D pad button again it locks the hardware buttons under the screen until I make my device sleep and resume.
Somtimes rather than making all the front hardware buttons unresponsive the issue is that once I use the Down Dpad button I can't use the up button. Pressing up will make it go down, as will pressing down (at least that's working ).
Regarding the white screen - this sometimes also occurs. I can force it to white screen by putting a little pressure on the silver panel surrounding the top, right and bottom of the screen (I have an imate jasjam). Randomly when there's no pressure on the rim and I wake it out of standby, it has a white screen that can only be fixed by turning the screen off and on again.
Finally, the LED indicator seems screwy. Sometimes it never flashes. Other times it flashes sporadically (uneven intervals - we're talking maybe a minute between one flash then seconds before another). When I charge it sometimes the LED doesn't come on but nevertheless it charges. Sometimes if the LED is on it never turns green to indicate a full charge. Yet other times it comes on orange, turns green, then never switches off!
Is it possible that
a) The hardware button problems.
b) The white screen problem.
c) The LED problem.
are all related to some kind of connection going loose? Why would the hardware button problem be temporarily fixable with use of the scroll wheel if this were the case?
The other thread has fallen silent. I'm hoping that some of the gurus in here can offer some input here, even if they don't know the answer but can formulate an opinion. I know very little about these devices.
Thanks in advance guys!
PS - don't really know if I should start another thread, I've posted here as it seems like very much the same issue.
Anybody any idea? advice?
I had a similar problem with my HERM100. I didn't mess around with it too much, I just had Cingular replace it out of warranty exchange (thank god those original ROMs are on the wiki ). I did notice however that after doing a master reset, the screen would function again although I haven't messed around with it too much. I got so frustrated with removing the battery for 5 minutes and STILL powering on with a white screen that I just threw it in my back seat until the new one arrived.
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Anyone anyone?
HELP!!!!
barncourt said:
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
Click to expand...
Click to collapse
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
CINGULAR IN JA said:
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
In my case, they also are always lit up when the screen is also active.
And no matter what ROM version, they occasionally stop responding. Side buttons keep working.
mikechannon said:
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
Click to expand...
Click to collapse
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
CINGULAR IN JA said:
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
Click to expand...
Click to collapse
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
mikechannon said:
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
Click to expand...
Click to collapse
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
CINGULAR IN JA said:
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
Click to expand...
Click to collapse
If it wouldn't be a software issue, why is it, in my case, instantly resolved when going to settings -> phone with the side buttons?
i had this problem i took it to a guy who fixed the problem he said it was a very small tear in the flex cable which causes this white screen every now ant then and the buton problem , sorry to say its the cable problem and u need a very capable person to fix it or replace it with a new one . its very common problem baised on the guy who fixed it .
dmxl said:
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Click to expand...
Click to collapse
Exactly what is happening to me, no white screen issues, just screen taps and answering calls, I also have another problem where the PDA will not allow me to open anything, be it the start menu or contacts, it will open and quickly close again. I have had mine swapped through Telstra in Sydney, it worked fine for a while and then the same crap again. These problems started before I even touched the OS, so it must be a build problem. Maybe we should write a joint letter to HTC letting them know that there is a serious problem with their machine.
I have had the same problem, got my Tytn through work so we sent it back to the company that supplied it to us. Got it back yesterday and they had replaced the "switchboard". Not sure what it is but there was the problem. Had white screen and buttons not working.
Today I noticed that my HD2 vibrates strangely, it sounds like a shaving machine when vibrating
I performed many soft resets, hard reset, then I flashed an offcial ROM, SPL, etc. but nothing works. I guess the problem is related with the vibration hardware.
I will be sending my phone to HTC service tomorrow, and let you know about the results.
Anybody faced the problem? Or any suggestion before sending the device to service?
Thanks...
vizier said:
Today I noticed that my HD2 vibrates strangely, it sounds like a shaving machine when vibrating
I performed many soft resets, hard reset, then I flashed an offcial ROM, SPL, etc. but nothing works. I guess the problem is related with the vibration hardware.
I will be sending my phone to HTC service tomorrow, and let you know about the results.
Anybody faced the problem? Or any suggestion before sending the device to service?
Thanks...
Click to expand...
Click to collapse
I remember (2months ago) that my vibrate works strangely, i hard reset and it works again perfectly!
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
avivsworld said:
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
Click to expand...
Click to collapse
I think I have the same problem, my camera flash seems to be pressed in (one side of it).
Is there an easy solution or should I hand it to the service?
Thanks...
avivsworld said:
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
Click to expand...
Click to collapse
I am trying to find the older posts you mention, but no luck so far. Can you post the links to those post, I might be searching with the wrong keywords or something like that...
Thanks...
Vibration seems to be a big problem. I had the same issue. only solution: warranty repair. my phone was replaced by 02.
vizier said:
I am trying to find the older posts you mention, but no luck so far. Can you post the links to those post, I might be searching with the wrong keywords or something like that...
Thanks...
Click to expand...
Click to collapse
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
avivsworld said:
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
Click to expand...
Click to collapse
This is exactly what happened to my phone. The lower part of the plastic flash cover looks pushed in (I checked with another working HD2).
And yes, I handed the phone to the service today. I hope they do not break other things when trying to fix this issue
Thanks...
Vibration lost
avivsworld said:
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
Click to expand...
Click to collapse
Hi,
My Leo stopped vibrating. I saw your posts and checked the camera flash. It was indeed pushed in. My warranty was not valid, so I tried to fix it myself. It was actually very easy. I followed a video showing how to disassemble the Leo . As soon as the housing is removed, we have access to the flash plastic cover. I've just snapped it in very carefully et voilá: the phone is back to its own self!
Many thanks for the tip. I would never have guessed it was related to the flash cover!!
Maria
doloresbf said:
Hi,
My Leo stopped vibrating. I saw your posts and checked the camera flash. It was indeed pushed in. My warranty was not valid, so I tried to fix it myself. It was actually very easy. I followed a video showing how to disassemble the Leo . As soon as the housing is removed, we have access to the flash plastic cover. I've just snapped it in very carefully et voilá: the phone is back to its own self!
Many thanks for the tip. I would never have guessed it was related to the flash cover!!
Maria
Click to expand...
Click to collapse
I am glad you fixed your problem easily.
My phone is still not back from the service
I have my phone back...
Finally, I have my phone back. The service report tells me that they have changed a part responsible for vibration. I checked the vibration functionality and actually it is working fine now. One surprise however is that the flash cover still appears to be pushed in.
Same problem
My TMobileUS HD2 is having the exact same problem - no vibration at all, even after hard reset. I also see the camera light's assembly is no longer correctly positioned in the body as it should be. It seems that the lower end is pulling into the body of the phone.
I treat my phone very gently, so I'm sure this didn't happen from rough treatment. Given that it's happening on a number of contiinents, this looks like a design defect.
TMobile demanded that I send it in for warranty service.
No Vibration Either
I have a TMOUS HD2, and I may have been the cause of this happening after reading this. I have no clue what you're talking about, but I have dropped the phone a few times and though the problem didn't happen right after a drop, it was just odd how it started. I had it set to vibrate when I pressed any keys, and then I was texting and it stopped. So... the only thing that I've seen that is a case that I only seem to have, my phone vibrates AT WILL, but when it does, it's very raspy and sounds very 'sick' and loud. So, I am not about to open my phone. I'm tech savvy enough, but in no way have I ever tinkered with hardware. I got my HD2 back in May, so I'm hoping that I have a warenty through HTC at least. I haven't contacted anyone about this, so is it my best bet to just send it to HTC or contact T-Mobile? And I have insurance, but I purchased my phone from Walmart. lol. Help?
I just came across this thread....
my vibrate function has been broken for several months and I've been delaying sending in for repair because I'm afraid of how long it will take (plus, it is the Australian version so I dont know if HTC North American will actually repair it under the current warranty)
I noticed that the bottom part of my flash does in fact seem to be pushed in. I'm considering doing what Maria did (opening it herself and popping the flash back into place). Does anyone have a sense of how long the repair takes from HTC?
Thanks
VIBRATION and FLASH PROBLEM
i'm having the same problem... lower part of the flash is pushed in. and vibration sometimes functioning sometimes not... but worst my FLASH NOT WORKING AT ALL...
Now having the same problem. This is a design flaw if I've ever seen one.
Same problem here, vibration was not working, but I just fix it!
I bought this T-Mobile HTC HD2 off eBay, and turns out that the vibration was not working!!
Once I found out this thread and the information about how the flash cover was blocking the vibration motor from functioning, I was able to confirm this was exactly what was happening!
So, I decided to open up the phone. I did not had to extract the entire screen piece out, I just had to unscrew the four screws and use a "shower suction thingy" on the screen to help pull it out but just the top part (in other words, half way out), because I only needed access to where the flash cover was, and then I was able to use a thin screw driver to PUSH back the flash cover to it right position. Then, after putting everything back to its place, the vibrator motor started to work!!!
Maybe I will put some "super glue" on the flash plastic cover to secure from being accidentally being push in in the future. Anyways, thank you everyone here on the forum for sharing your ideas!
As a late follow-up to mine... I called HTC and got an RMA number. Put off mailing it in for 3 weeks while I backed it up and arranged a temporary phone.
Mailed it on a Friday. Had it back with a replaced back on Monday.
I was EXTREMELY happy with the customer service on this one!
Missed 3 calls today... realize phone is not vibrating. Check different things that should make phone vibrate... nothing...
Flash lens is not pushed in this time... I'm about a month out of warranty now. Wonder how this is going to go over
I had this exact problem occur a few days ago, and I opened it up and simply snapped the light cover back into place carefully. But my phone still wasn't vibrating, so I opened it up again and I saw that the black rubber around the vibrate motor was causing the part that creates the vibration to get stuck. I simply just snipped a bit away so that the it was free and ta da! However the vibration is still weak compared to before so I don't know how to fix that? hope this helps you, and if someone knows why the vibration might be weaker than before the problem started any help would be great. thanks
Hello
This morning I had an issue with my Android clK build and I had to pull out the battery. Unfortunately, I bought one of these flipping case that holds the phone pretty tight so I had to force to take it out and I suppose I pushed a little to hard.
Since then my vibration sounds weird. Like an electric shaver...it has a higher pitch.
It's a stupid reason to send it back as it does work but I was wondering if it already happended to one of you.
Any solution to revert to the way it was ?
googling the following words "xda hd2 vibrate weird" gives the following FIRST result:
http://forum.xda-developers.com/showthread.php?p=15240424
see my post there (post #3)!
(its a somewhat common problem, caused by the camera flash cover pressing against the vibrator motor just underneath it)
I've had many hd2s in my hand, I hate that vibration, it literally feels like the screen is shaking rather than the phone. Its definitely a hardware issue and I don't recommend trying to repair it yourself as self repair has been known to cause further issues
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.
gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
Click to expand...
Click to collapse
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.
hiroller173 said:
I've had much the same problem. While the S-Pen was able to make selections that the touchscreen wouldn't, other S-Pen functions such as Air Command and being able to start an Action Memo wouldn't work. Waiting for an extended period of time (like 24 hours) and all of a sudden it started working again. However, while I was waiting, rebooting - even performing a factory reset - didn't' fix it! I just now rebooted it and it's not working again, and it's not in a case.
Where do you find the option to enable and disable Smart Cover? On the Note 2, it was (apparently) under Security / Device Administrators, but I don't find it there. The only option I could find was in Accessories / S View Cover / Automatic Unlock but changing this setting (including rebooting between settings) hasn't solved it.
Click to expand...
Click to collapse
Sadly, it was just coincidence that it randomly stopped happening when I enabled and disabled the auto-unlock feature with Smart Cover. My phone started doing it again and I've been unable to repair it. I went to Verizon and they wiped my phone before telling me I'll just have to get it replaced with a refurbished one. Very frustrated. Shame there aren't any AOSP based ROMs yet (like CyanogenMod)-- they'd probably fix it since the cover thing wouldn't be a feature.
Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?
Same experience
Just to add my experience as I go. This afternoon I received an error that my SMS data could not be downloaded. Upon sliding down the notifications I was unable to control much. I ripped the majority of my hair out over this.... My pen works flawlessly everywhere though. I eventually discovered it works fine on the bottom half as you described. I have to run to some appointments, but I'll touch back after I try a few things.
gilros said:
Bump.
Anyone know of the APK which would handle S View Cover behavior? If we were to disable that I imagine the problem would go away. I'm still not totally sure of the origin of the issue, but it seems to come from a combination of hardware and software problems. The hardware sensor thinks I have the case on, so the software changes things around. When I call people, I get the S View Cover style call screen. If I change the toggle in accessory settings to automatically unlock the phone when opening the cover, hitting the lock button automatically unlocks the phone as though I had no lockscreen. However, when this is disabled, the lock screen is NOT in the S View Cover form-- it looks stock. This confuses me.
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse
gilros said:
Any ideas from anyone else getting the issue?
Click to expand...
Click to collapse
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium
Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Frank Westlake said:
Maybe it was caused by the battery insertion or backplate replacement. Perhaps too much pressure or an uneven pressure damaged the circuitry, which is now loose and causing the intermittent error.
Or perhaps it was a static discharge from the battery.
Both cases seem to me to be warrenty items.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse
thematt917 said:
Uh oh... I'm rooted and on Verizon. There isn't a way to unroot yet is there?
Click to expand...
Click to collapse
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium
I realized had about 3 days left on my Best Buy (elite+) 45 day return. Swapped for a brand new one :good: with no issues!
Frank Westlake said:
I thought the only thing necessary to unroot is to flash the stock ROM. The download is linked from the de la Vega post.
SGH-I717/SM-N900V/XDA Premium
Click to expand...
Click to collapse
gilros said:
I had an exam and removed the battery for my phone for the duration. When I put it back in, the bottom half of my screen stopped responding to touch. The screen itself is unharmed and uncracked. The S Pen still works flawlessly. However, the bottom half of the screen ("above" about 890 pixels on the Y axis) simply does not respond to normal touch. In addition, the volume buttons no longer change my notification volume. They still work for music volume, just not touch volume. When I long-press the power button, the power menu sits at the very top of the screen and has black covering the whole bottom of the screen for some reason. When I receive calls, the buttons are right at the top. Because of this, this seems to be some sort of software issue, but I have no idea what would cause it. Has anyone with more experience with Samsung devices seen this before? Multiple restarts and battery pulls have done nothing.
EDIT: In case anyone else encounters this, it had something to do with my case. I think my phone thought it was a smart cover for some reason. I enabled and disabled smart cover and then removed and replaced the case. It's working fine now.
EDIT: Never mind, that was a coincidence. The issue is DEFINITELY that the phone thinks it has a smart cover on it, but it has nothing to do with my own case.
Click to expand...
Click to collapse
I have the same issue. I ve been trying to understand why this happened but no luck. I tried everything from updating to reseting. I first noticed it when i took the battery out as well. but the problem kinda fixed it self so i thought the phone has a spaz or something. but when i removed the battery again it happened again.
I took it to the people i bought it from and all they can say is cause there were a couple of scratches on the side of the case that it may not fall under warranty...
i was pretty angry cause its only two months old and the warranty is for a year. and the problem started happening while i was overseas so its been like that for almost a month. hopefully the sales guy is just talk cause its not up to him its just his "opinion" as he put it.
Did they explain to you why this happened? or if this is a common issue?
Hope your new phone is ok
I have this problem intermittently also. Exactly as described above.
Sent from my SM-N900V using Tapatalk
any updates on this? im having the same problem now with my tmobile version. it fell facedown and the extended battery i had it in fell out. im going to try putting an aosp rom on it when i get home from work.
Timely post! I gave up. Verizon sending me a warranty replacement to arrive today.
Sent from my SM-N900V using Tapatalk
I have the solution!
Please. Let me know it worked for you, so people that doesn´t like to post and only read can solve this problem.
The Problem:
The half bottom screen is not working. Including the back button, the option button and the home buttom. they only work if you use the S Pen. Except for the home button. The volumes button do not work either. So the Solution is this..
take off the battery while the phone is on. YES, do not turn off the telephone and the take off the battery. Just take off the battery while the phone is on. It should work. I hope this is the solution.
One more thing. Do not allow your phone to dried up the battery completly so this wont happen again. It is better to turn it off before it dries up.!
Please let me know if it worked for you! I will let you know if this problems start again and if was only an coincidence.Hopes it not!
This tough me a good lesson! never buy a Phone from not trusted retailer, it is better to pay the full price a good store. The people that sold me the phone has a crappy warrraty like if the screen it cellphone is complete off they wont allow me to use the warranty and my phone had faulty battery conecction so it was off. then I paid 100 dollars to be repaired then this problem.
Ok, guys please let us know if it worked so people start saving their phone
Just happened to mine as well
Hard reset didn't work, on the phone with support trying to request a replacement now.
Finally Solved!
Hi
I had same problem
I did everything u said like:
mega wipe and changing rom
custom roms
taking out battery when it's on ( I Did this but I don't know It had any effects on my phone or not!)
taking out external card
But I still Had the Problem
Solution:
But I had a flip cover and I separated that from phone and thanks God,surprisingly It's Fixed and it works like a charm!!! after that I used my original cover and there is no problem till now.
Good Luck
Had the same problem of touch not working.
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.
luas_13 said:
I tried everything as suggested by the members but my Note 3 is still not working right.Touch not responding all of a sudden in the bottom part of screen after i removed the battery for sim change. Please suggest something.
Click to expand...
Click to collapse
I haven't gone back to refresh my memory but it seems to me that all these occurrances were caused by removing the back cover. Try removing it and the battery and firmly press on every spot with your thumb. First place the device face down on table padded with a single layer of a blanket. Remove the SIM and SD card and firmly reinsert. Press the back cover on and try it, then return it for warranty if it is still bad.
Frank
I also was faced with this issue today at the start of my morning BUT I FOUND A SOLUTION
I have a Sprint Galaxy Note 3 N900P Stock ROM/ no root, no mods/custom kernels/boots etc...
My device side effects were
The bottom half of my screen was not responding to my fingers,
When you press the Power Button, The options appeared on the top section of the screen instead of being the center
When I press the volume up/down keys, The volume would raise and lower, But the screen that pops up and shows you the volume had increased or decreased didnt show up
Only way to use device was with S Pen
Basically all the issues everyone listed, I had them.
Now my solution; if the issue is a hardware issue.
After dissembling my phone to see what each hardware part of the phone controls, I've come to the conclusion that there was an issue with my USB Dock Connector section of the phone. I uploaded a image pointing which connector controls it. I tried to just wipe and clean it up a bit because mines had some residue on the underneath of it. Then I plugged it back in and it started back to work %100. After I tried restarting it a few times and shaking the device up, it still works; Although I am still going to order a replacement USB Charging Port with flex cable just in case.
fixed.
This is the definitely the hardware problem.
most likely happen if u ever dropped ur phone to the ground ----------- and reboot ur phone some what later time. (can be days or months).
Temp Solution to this problem is...
face down your phone to the flat floor or a table, gently hit the back, strong enough to shock the devide, but not that strong to crack your screen.
one other simple way is to drop your phone to the floor, screen is facing down, from about 30 cm high from the floor.
"simply, hit your device like you used to fix your ur old TV. "
that is just a temp. GL.
Hi,
A while ago my S7 Edge had some strange behaviour. I think I posted a forum when I had the problem, but suddenly the phone was working normal again... Until now. (5 months later)
When I'm watching youtube video's it's like I'm continius pressing the screen to show the pause/play button and title of the video. But I aint touching that screen?!
Also the back button keeps pressing itself. It's so anoying... I disabled the capacitive buttons in the generic.kl file, so they don't work in android. This took me like 20mins to do, because I kept going bck to the home screen...
When I layed in bed, I saw that the back button was slightly lit up. Just a little bit. I freaked out, because I have the backlight of the keys turned off!
Is it possible that there got water inside the phone? The only water this phone has seen is the shower.
Does someone have a clue what this problem is?
Thanks!
Hmm it looks like a screen problem to me.. doubt is the water since i i always use my phone under water...have you tried a factory reset? Are runing a custom rom?
nickxofficial said:
Hi,
A while ago my S7 Edge had some strange behaviour. I think I posted a forum when I had the problem, but suddenly the phone was working normal again... Until now. (5 months later)
When I'm watching youtube video's it's like I'm continius pressing the screen to show the pause/play button and title of the video. But I aint touching that screen?!
Also the back button keeps pressing itself. It's so anoying... I disabled the capacitive buttons in the generic.kl file, so they don't work in android. This took me like 20mins to do, because I kept going bck to the home screen...
When I layed in bed, I saw that the back button was slightly lit up. Just a little bit. I freaked out, because I have the backlight of the keys turned off!
Is it possible that there got water inside the phone? The only water this phone has seen is the shower.
Does someone have a clue what this problem is?
Thanks!
Click to expand...
Click to collapse
I have the same problem if I understand correctly. When I download something from Google play then the phone get black screen and the button lights are on. But can't open the screen. It stucks.. don't know why.
raz_il_dio said:
Hmm it looks like a screen problem to me.. doubt is the water since i i always use my phone under water...have you tried a factory reset? Are runing a custom rom?
Click to expand...
Click to collapse
Yeah, I'm running the latest version of supermanrom. Factory reset doesn't help at all...
StonebridgeGr said:
I have the same problem if I understand correctly. When I download something from Google play then the phone get black screen and the button lights are on. But can't open the screen. It stucks.. don't know why.
Click to expand...
Click to collapse
My screen works perfectly, no black screen. Only the youtube thing that bugging
nickxofficial said:
My screen works perfectly, no black screen. Only the youtube thing that bugging
Click to expand...
Click to collapse
Have you tried to back to stock nougat or mm?
StonebridgeGr said:
Have you tried to back to stock nougat or mm?
Click to expand...
Click to collapse
It's also present in the recovery (twrp latest), that makes it really hard to flash roms when the back button is pressed continously..
But I didn't try that yet, I switched between a couole roms and the problem is still present.
nickxofficial said:
It's also present in the recovery (twrp latest), that makes it really hard to flash roms when the back button is pressed continously..
But I didn't try that yet, I switched between a couole roms and the problem is still present.
Click to expand...
Click to collapse
Then it must be water on the button like the other guy said.. go to YouTube and find a video that help you to open the back side of your phone and do it with a dryer . I don't know the word .. the thing that we do on our hairs after the bath you know ;p
The issue is most certainly because of water damage. Most of the time if water comes into an S7/Edge it starts messing up with the cap keys, had those somptoms one, and also other people, but for me it was just 1 time after a pool bath with my phone, and it went away after maybe 1h. Now I am carefully when making the phone wet and I get it near water just to clean it, but not for fun anymore.
StonebridgeGr said:
Then it must be water on the button like the other guy said.. go to YouTube and find a video that help you to open the back side of your phone and do it with a dryer . I don't know the word .. the thing that we do on our hairs after the bath you know ;p
Click to expand...
Click to collapse
With a hair dryer you mean?
Thanks for the advice!
arnes_king said:
The issue is most certainly because of water damage. Most of the time if water comes into an S7/Edge it starts messing up with the cap keys, had those somptoms one, and also other people, but for me it was just 1 time after a pool bath with my phone, and it went away after maybe 1h. Now I am carefully when making the phone wet and I get it near water just to clean it, but not for fun anymore.
Click to expand...
Click to collapse
That's just stupid.. Samsung claims it's waterproof, so the shower mustn't be a problem, right..
I just spotted like realy tiny like bubbles or something on the back button, it looks like water indeed... **** me.
I think i'm remove the sim tray and put the phone in a rice bag for a couple days. If the problem doesn't go away, then I'll open up the back (breaking the waterproof seal ) and dry it up. Wish me luck..
arnes_king said:
The issue is most certainly because of water damage. Most of the time if water comes into an S7/Edge it starts messing up with the cap keys, had those somptoms one, and also other people, but for me it was just 1 time after a pool bath with my phone, and it went away after maybe 1h. Now I am carefully when making the phone wet and I get it near water just to clean it, but not for fun anymore.
Click to expand...
Click to collapse
I thought it was waterproof
StonebridgeGr said:
I thought it was waterproof
Click to expand...
Click to collapse
It is water resistant, which means that it is still possible to get water inside/water damage.
i'm also having a strange issue with the phone after some upgrades. my phone will freeze at times and nothing will restore this unless i use the back button and the phone works. It doesnt happen all the time but only at times. Its like its in pause mode and only back button fixes this.