I tried to install the official 6.0 rom and during the process my laptop ran out of battery and the update failed .
If i restart the phone ,shows "Please wait,device update in progress"
If i try to reflash it with another rom , put FLASH.DIO on the card , boot it in service mode same screen appears but SDLOADER doesn't work
What can i do to bring it back to life ?
arcadekidflo said:
I tried to install the official 6.0 rom and during the process my laptop ran out of battery and the update failed .
If i restart the phone ,shows "Please wait,device update in progress"
If i try to reflash it with another rom , put FLASH.DIO on the card , boot it in service mode same screen appears but SDLOADER doesn't work
What can i do to bring it back to life ?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=459123
arcadekidflo said:
If i restart the phone ,shows "Please wait,device update in progress"
Click to expand...
Click to collapse
Have you tried.. waiting?
I managed to restart the HP Rom Utility Update and thank god , i got it working
Same as me, finally I've got my 612c life back. Thanks to share..
Regards,
Tonny
italian rom 614c wanted
Does anyone have an ita rom for hp 614c?Please post me thanks
Oscarrr said:
Try this:
http://forum.xda-developers.com/showthread.php?t=459123
Click to expand...
Click to collapse
i have the same prob now...and i also try the DNW...as i cant do anything while only can see "please wait...this device is updating"....
so pls help me out guys!
arcadekidflo said:
I managed to restart the HP Rom Utility Update and thank god , i got it working
Click to expand...
Click to collapse
dear,
how u manage to restart the HP rom utility????i've same prob man!help me!
Related
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
Hi everyone,
I have a little problem, yesterday i tryed to install Windows Mobile 5 on my Qtek 9000, he had WM6... On the internet sayed i needed to do an "Hard Reset", and i made it. The problem is that i cant get the PDA back to life.. lol. I try to turn it on and nothing, it only does something if i do again and over again the "Hard Reset" thing, he says" you wish to erase all software? and i say yes..". I think the pre-instalation of the WM on my SD card was erased.. hwo can i re-install all over again? Do i need to put the SD card on my PC and then send the files to it and only then i put the card on my pda? sorry for question, i tryied to search on ur forums and google, i tryed the Extend_rom thing.. and nothing my pda doesnt turn on, only if i do the Hard reset thing..
Thank you for the help =)
halfamaster said:
Hi everyone,
I have a little problem, yesterday i tryed to install Windows Mobile 5 on my Qtek 9000, he had WM6... On the internet sayed i needed to do an "Hard Reset", and i made it. The problem is that i cant get the PDA back to life.. lol. I try to turn it on and nothing, it only does something if i do again and over again the "Hard Reset" thing, he says" you wish to erase all software? and i say yes..". I think the pre-instalation of the WM on my SD card was erased.. hwo can i re-install all over again? Do i need to put the SD card on my PC and then send the files to it and only then i put the card on my pda? sorry for question, i tryied to search on ur forums and google, i tryed the Extend_rom thing.. and nothing my pda doesnt turn on, only if i do the Hard reset thing..
Thank you for the help =)
Click to expand...
Click to collapse
Halfamaster,
here is the Universal university : http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
i am trying now the boot loader thing, i tryed your programs from the forum but nothing , maybe its because its "usb 1.00" on my device,hmm ?
halfamaster said:
i am trying now the boot loader thing, i tryed your programs from the forum but nothing , maybe its because its "usb 1.00" on my device,hmm ?
Click to expand...
Click to collapse
push the power button + the 2x soft-hardware button+ reset then you suppose to get screen in which it says 0 or X which you will you choose then the 0
yes, i have allready done that, and then i press POWER AND LITGH, and i get the boot thing "ubs . . . . V 1.00" but with is the program to send there the rom, i tryed the buzz programs, i tryed NO CONTRY ERROR program,,
halfamaster said:
yes, i have allready done that, and then i press POWER AND LITGH, and i get the boot thing "ubs . . . . V 1.00" but with is the program to send there the rom, i tryed the buzz programs, i tryed NO CONTRY ERROR program,,
Click to expand...
Click to collapse
what error you getting? any error message or number? In order to follow you and the problem you having you need to explain in detail ---> what you do exactly ---> what results you getting after that.
I everyone,
I was trying to intall a new rom in my Pharos but the computer crashed and the instalation was interrupted. Now Pharos doesn't conect, and when i try to install the rom again it says invalid vendor id or update error. I think is dead
Does anyone have the original Pharos Rom WM6 Eng ? or know where i can find? so i can try to save it.
Thanks
rom: 1.11.405.1
rom date: 01/29/08
radio version : 03.15.90
protocol : 4.1.13.59
maybe you can use this one : http://forum.xda-developers.com/showthread.php?t=394721
Thanks Teckynou, i have already tryed that on. Doesnt work, its the wm6.1 (update), i think i have to install again the original Rom in Eng. (and i dont find anywhere)...
have you tryed a hardreset?
http://www.hardreset.eu/htc_pharos_p3470_hard_reset_soft_reset_en.html
Yeap! didnt work....i really need help.
at_mix said:
Yeap! didnt work....i really need help.
Click to expand...
Click to collapse
If all else failes send it to HTC... and theyll repair it .. will probably charge you since you tried to flash (an unofficial) rom but its better than having a brick.
Maybe someone else has a better idea?
lots of luck to you!
Another Original ROM
http://forum.xda-developers.com/showthread.php?t=403957
What U mean by "DEAD"...?
Have U managed to have the tri-colors boot screen?
Tri-color Boot screeen is looked similar to this.....
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg
If not,...
Try the method below to get the Tri-color boot screen. Though it is for ELF, it usually works to all HTC devices. Surely..work on Pharos..
I recommend Hold down camera key => Press/Release Reset Button at the back => Release camera key after you have the tri-colour boot screen showed up.
http://wiki.xda-developers.com/index.php?pagename=Elf_Resets
Then you can flash an original ROM... Note it is OK that 'Active Sync' symbol show "NOT CONNECT".. U can still proceed with Flashing!!!!!
Let me know if it works this time.......
bita said:
Another Original ROM
http://forum.xda-developers.com/showthread.php?t=403957
What U mean by "DEAD"...?
Have U managed to have the tri-colors boot screen?
Click to expand...
Click to collapse
Hi Bita,
Yes, im able to enter the reboot (the tri-colors boot screen), the only problem is the rom i try to flash i get the ERROR vendor id or update error.
I'll try that original rom.
Thanks
Hello Guys,
i am getting crazy witch my ipaq. I downloaded the newest firmware for my uk ipaq. I startet the HP RUU and everything was ok, till my notebook chrashed during the firwmware update....
So my ipaq only hangs on the start screen. What can i do ? I`ve read here in this forum that someone started the SDLoader and the RUU found the ipaq and startet an new update. But i dont get it work, i tried it several times, but my computer doesnt recognize the ipaq ?! (In the Device Manager there is no new usb device)
The Ipaq shows after the SDLoader started: Update Error! Pls Check!
What i doing wrong ? I am getting crazy with this thing !!! Please help, or please can someone give me a tutorial for a noob (i am not one, but now i think i am...) ?
Big THX
P.S.: Sorry for my bad english, i am a portuguese man...
You can check this:
- connect ipaq (running, no matter what error on the screen) to pc, run hp upd utility, try to update
- run SD loader, and the same way - connect to pc, run hp upd
- try hard reset (?)
I hope one of this helps. If no, I have on idea besides hp service.
Regards,
Darek
How i can run the bootloader mode ?
Is this the same as the SD Loader Mode ?
Big THX
I got my baby back, YEAH !
I only flashed the Windows from this Page
http://4pda.ru/forum/index.php?showtopic=79455&st=120
and then Windows-Screen showed up. So then i could install the new firmware again and now everything is ok.
So possible this can help anybody if he bricked his 614c !!
Bye
hello guys....i'm in very big trouble....i tried to update the rom from HP by pc with windows vista...in 55% it disconnected from the pc.and i did soft reset.after that when i on the ipaq it shows only hp logo and in the top write "please wait.device update in progress"...but some min later says "ruu fail" and restart....last 7 hrs doing the same.....i try to did sd loader but nothing i can do....it shows only please wait....device update in progress....so guys pls pls pls help me out from this prob...
regards,
Sajib
Bro, please, use search. Your solution is here
sergiorus said:
Bro, please, use search. Your solution is here
Click to expand...
Click to collapse
i tried bro!!result zero! that even go for download image mode!!!only i can see "please wait...this device in update progress"...matter of fact i bought that friday and without any warrenty! :-( just ****ed man!
describe by steps what you do
sergiorus said:
describe by steps what you do
Click to expand...
Click to collapse
atlast i solve the prob!i just use winxp and start the HP update Utility again...and then start updating again.....thanx bro for ur help