hey fellas im new to this so bear with me.i tried to download some software onto my wing(touch flow) i must have done something wrong.cause it stays on tmobile screen and does nothing.i tried to hard spl it,update ruu and nothing.it reads no connection.(error 264)i have vista and my windows mobiledevice center shows no connection.ive took out the baterry,usb,everything.im outta ideas.any help is greatly appreciated.
Related
HELP!!!!
My phone it stuck on the Windows Mobile Screen. I can't even hard reset.. I get to the press '0' screen, I press '0' and then I get the Audiovox screen, then onto the Windows Mobile Screen. I got the phone off eBay, no waranty and I don't even know who the provider is. I was told I need a ROM but everywhere I've checked the links are broken.
Can anyone PLLLEEEEZZZEEEE let me know where I can get a ROM and which method is the best way to install it. I can only hook up by USB in the Typhoon three-color screen (can't do Activesync).
Please HELP!!!!!!
Thank you!
help? pleeeeeeeeeeeze..
aristweed said:
help? pleeeeeeeeeeeze..
Click to expand...
Click to collapse
try http://www.spv-developers.com/
i don't think anyone here is going to help you on this because this is mostly for ppc not that much smartphone stuff. hope this helps
if you do find something post link so that at least something useful gets posted here
Help needed to get back to WM5 (cingular 8125)
Please can some one help me.
I have tried to get my cingular 8125 back to the wm5 operating system.
I used the hard reset and the soft reset but keep ending up with a multi coloured screen.
I have looked but I cant find the solution.
The website weare I fine the program is this,
http://www.imei-check.co.uk/m3000unlock.php
Please Help Help Help Help Help Help Help Help Help
Sounds like your stuck in the "bootloader" screen
This is where you would flash the ROM I believe.
Just connect it to your computer and start your ROM.
If I am not mistaken it should reboot at the end of your ROM loading.
claroscuro said:
Help needed to get back to WM5 (cingular 8125)
Please can some one help me.
I have tried to get my cingular 8125 back to the wm5 operating system.
I used the hard reset and the soft reset but keep ending up with a multi coloured screen.
I have looked but I cant find the solution.
The website weare I fine the program is this,
http://www.imei-check.co.uk/m3000unlock.php
Please Help Help Help Help Help Help Help Help Help
Click to expand...
Click to collapse
When your 8125 is at the multi-colored screen, is there also a small message in white text prompting you to send? If so, you need to push the green hardware phone key. This sends info to the mfg, to get the 8125 operating again.
8125
2.25.11.102
Same as Claroscuro. Need to get WM5 back from installing iPhone skin. Tried soft and hard resets and iPhone skin still there. Can I re-install WM5, as I would with any PC OS?
Please help.
Thanks!
rapanui
Hi,
Yesterday i tried to upload new firmware to my XDA11i.
During this my lappy crashed (bloody Vista)
My screen just shows "serial" when i try to power up, The green LED doesnt flash or go yellow when put in the Base unit.
Any help would be apreciated.
Chris
Your dead Alpine...
999grub said:
Hi,
Yesterday i tried to upload new firmware to my XDA11i.
During this my lappy crashed (bloody Vista)
My screen just shows "serial" when i try to power up, The green LED doesnt flash or go yellow when put in the Base unit.
Any help would be apreciated.
Chris
Click to expand...
Click to collapse
Your in bootloader mode. You may be able to resolve the problem by removing the battery and letting it set of a few hours. This will run down the backup battery and kill the memory, or try a hard reset. However, you will lose all you data. Try reading some of the posts on this website. Good luck...
999grub said:
Hi,
Yesterday i tried to upload new firmware to my XDA11i.
During this my lappy crashed (bloody Vista)
My screen just shows "serial" when i try to power up, The green LED doesnt flash or go yellow when put in the Base unit.
Any help would be apreciated.
Chris
Click to expand...
Click to collapse
HI....Bro I have the same situation like you when upgrading the firmware using vista. It just killed my alpine and then only show serial. I used mtty program and set 14 0. You have to disabled the activesync setting for no usb connection when upgrading the firmware using UpgradeUt_noID. Windows vista really sucks big time when upgrading firmware. I just revert back to XP where it is more stable.
Thanks
Still no joy, but thanks for the replys.
Vista came with lappy and as its still under warenty i can't downgrade to XP.
Does not seem to want to hard reset, Left it with battery out all night.
Getting worried now!
Any other sugestions would be welcome.
Chris
999grub said:
Still no joy, but thanks for the replys.
Vista came with lappy and as its still under warenty i can't downgrade to XP.
Does not seem to want to hard reset, Left it with battery out all night.
Getting worried now!
Any other sugestions would be welcome.
Chris
Click to expand...
Click to collapse
there is one VERY easy way, take the update files/dock/xda2i to a friends house and use there xp machine, job done, or take it to work with you and do it there. no worries. as long as its still in boot loader mode you will not have a problem.
999grub said:
Hi,
Yesterday i tried to upload new firmware to my XDA11i.
During this my lappy crashed (bloody Vista)
My screen just shows "serial" when i try to power up, The green LED doesnt flash or go yellow when put in the Base unit.
Any help would be apreciated.
Chris
Click to expand...
Click to collapse
The fix is here:
http://forum.xda-developers.com/showthread.php?p=1739989
ok so im new at this soo please bare with me
ive been trying to upgrade my phone to wm6
so i found instructions on youtube and followed them good...
then i found out my phone was g4
so i tried to unlock it using this
http://forum.xda-developers.com/showthread.php?t=332320
I used both and still nothing, it will cancel... i used windows xp and i still havr trouble... soo if someone can help me i would really appreciate it
im trying to unlock it so i can update it with the t-mobile wizard
and i want the touchFlo
but i just cant unlock it to get it
let me get alittle more in dep
im using the hard_SPL-G4.exe and it says no device detected
and it is (im using windows xp)
but when i try it with vista it will detect it but wont go all the way through and will leave my 8125 in a white screen
and then the program will close due to problems
i used the soft one but then it wont go though in the end on windows xp
This thread might help you
http://forum.xda-developers.com/showthread.php?t=303972&highlight=unlocking+a+G4+wizard
This one as well
http://forum.xda-developers.com/showthread.php?t=332330&highlight=unlock+g4+wizard
Hello everyone,
The other day I dropped my HTC Ozone into a hot tube. I looked around online to see if there was a easy way to dry out my phone and a site told me to place my phone in a bowl of rice for a day or so. That worked and I can now boot my phone but only to the bootloader (Red, Green, Blue and white screen). It says CEDA100 Spl-0.39.0000. I was able to hook up my phone with a usb cable but was not able to run the romupdateutility that comes with the hardspl by jockyw package. When I try to run the romupdateutiliy, It does not see an image version that is currently installed and when I try to update the image, it changes my phone to a progress bar but never moves. After waiting some time, the update returns "Error 262 : Error updating".
Any help would be great.
thanks,
***POINTLESS POST WARNING***
holy crap that sucks!
ive never heard of placing it in a rice bowl..taking the batt, sim and mem card out and letting it self dry yes..but never in a rice bowl lol..
either way..if ur in a boot loader then i think ur safe, someone should pop up with an answer shortly
yep, it really sucks... Not sure what to do from here. Any help would be great.
thanks,
same issue but caused by bad flash of 6.5. any help would be greatly appreciated.
Does anyone know about loading IMG files from a SD card? It looks like my bricked Ozone will boot or load a image file from the sd card. If I name the cedar-original-spl-0.39.nbh file cedaimg.nbh, my phone will try to load it after the bootloader. Right now it says loading... and it has been that way for 10 minutes.
thanks,
please help i have a dead htc ozone after trying to read codes by software,i have now dead one cant boot and cant reconized by the computer
please any idea help me
Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose
prj102 said:
Hello everyone,
The other day I dropped my HTC Ozone into a hot tube. I looked around online to see if there was a easy way to dry out my phone and a site told me to place my phone in a bowl of rice for a day or so. That worked and I can now boot my phone but only to the bootloader (Red, Green, Blue and white screen). It says CEDA100 Spl-0.39.0000. I was able to hook up my phone with a usb cable but was not able to run the romupdateutility that comes with the hardspl by jockyw package. When I try to run the romupdateutiliy, It does not see an image version that is currently installed and when I try to update the image, it changes my phone to a progress bar but never moves. After waiting some time, the update returns "Error 262 : Error updating".
Any help would be great.
thanks,
Click to expand...
Click to collapse
I dont have a HTC Ozone, but it looks to me like if your memory got damaged. Not sure if it can happen on the ozone though.