Database Users

After Touch IT 2.3, My Wing Cant connect to the computer.

Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.

Can somebody help me with this problem?

I am using vista also.. try soft reseting it.

I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3

Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked

Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...

I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.

Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.

do you have the link to that update im having the same problem

nm i got it, thanks for the solution though

Stuck in Bootloader and Frustrated

Hi all
I have just recently bought an 8125 unlocked and for T-Mobile use, but now I'm starting to have issues. My phone suddenly turned off 3 days later, and now it won't start up past the loader screen. I've been looking through every forum I could, and have concluded I must have a bad ROM or something..
Now, I've downloaded an RUU and was told I could use that to reset my ROM, but when I'm in bootloader mode, my computer won't detect it. It says that it's downloading drivers, but it's "device unknown." Some have said to reinstall activesync, but I'm on Vista, so I already have Windows Mobile Center. I know that I need to run an RUU, but if my computer can't recognize my phone, then I'm stuck because the program won't run.
Please, does anyone know what's going on and could help me? My search results have me even more confused. If it helps, i have a G3 (i'm not sure what that means)
Thanks!

whoops, wrong phone thread. moderator, please delete this!

Help if possible please?

Hi all, am a noob to this and have dloaded and tried several roms here but got nowhere.
I have an orange SPVM2000 running WM2003
my PC is running Vista Premium ( so no active sync as such)
and i have a dock station
alot of the roms require to put the update to SD then boot to Bootloader and run, but i cannot do this as when it is in cradle i have no access to reset button and if i goto bootloader first then put back on dock the PC will not read the device.
I AM WELL LOST.
please could some one reply with a dummys guide please?
i have read as many tips guides and stickys and still lost.
I do not care if i upgrade to WM 5 or 6 but woud prefer 6
THANKS!!

for BA particularly, you will flash direct from your computer.
I dont know whether your Vista is compatible with the flashing software, but XP surely does.
Do further reading, I am sure u will understand what I mean.

And a comment for the bootloader problem: first you put the device in bootloader mode, then you put it back in the cradle. Simple as that.

ALL DONE
All sorted cheers, WM6 up and running, i did a bit of fiddlin and away i was, no need for bootloader as it did it itself, it would not use vista so i use xp with active sync. cheers all

upgrading rom

friends...mine is an 64 MB O2 Exec tomal build device
n i tried to upgrade it using Uni_21127v2.3-64 but my phone got
switched off n since then it stays only in the bootloader mode n ntn else happenes even if i remove the battery n again insert it, the device still stays in the bootloader mode...i dont knw wat has happened to it...as i dont havemuch knowlege about it..plz can anyone help me out n guide me...n m also in search of wm 6.1 or 6.5 rom by tomal...any help wud b appreciated....

Welcome to forums
Have a deep read on the Wiki
Good luck,

.... =]
if you cant find the usefullness in the wiki, firstly
Basicly the ROM hasent loaded propperly, but your uni can be saved.
So firstly,
what Operating System (Windows XP / Vista / 7)
1. Windows XP - good, as you can reflash quickly
2. need to load Windows XP as a VM (Vista)
3. Need to load Windows XP as a vm (Vista)
I would download a different ROM just to reflash with, say a tomal rom
then connect your uni to your pc, and let activesync give its nodification, then open the RUU and your uni should load the rom you have selcted to flash,
Flip, that shows how much of an ORD i have... now am writing tuts on re-flashing phone... HELP HELP

rom upgrade on locked sim?
just wanted to ask if one can upgrade the htc universal to wm6 even though it's locked on orange sims.
Thanks

Welcome to forums
More than one can upgrade ROM
Just be sure to read the Wiki instructions
Good luck,

[Q] WP7 SDK please!

Right trying to unlock my phone but i can not install the windows phone tools, i get the message unable to install in compatability mode (windows 7 64 bit),
now i know i must be stupid as but how do i sort this, i tried unlocking without it but my comp wont connect to the phone so assuming i need the sdk, (i dont even know what the damn thing is)
god damn this is hard work lol iv read about 5 different guides and downloaded all sorts
any help appreciated and i have tried for about 30 minutes to find the answer
so please no flaming

What version of windows are you running?

i am faceing the same problem