friends...mine is an 64 MB O2 Exec tomal build device
n i tried to upgrade it using Uni_21127v2.3-64 but my phone got
switched off n since then it stays only in the bootloader mode n ntn else happenes even if i remove the battery n again insert it, the device still stays in the bootloader mode...i dont knw wat has happened to it...as i dont havemuch knowlege about it..plz can anyone help me out n guide me...n m also in search of wm 6.1 or 6.5 rom by tomal...any help wud b appreciated....
Welcome to forums
Have a deep read on the Wiki
Good luck,
.... =]
if you cant find the usefullness in the wiki, firstly
Basicly the ROM hasent loaded propperly, but your uni can be saved.
So firstly,
what Operating System (Windows XP / Vista / 7)
1. Windows XP - good, as you can reflash quickly
2. need to load Windows XP as a VM (Vista)
3. Need to load Windows XP as a vm (Vista)
I would download a different ROM just to reflash with, say a tomal rom
then connect your uni to your pc, and let activesync give its nodification, then open the RUU and your uni should load the rom you have selcted to flash,
Flip, that shows how much of an ORD i have... now am writing tuts on re-flashing phone... HELP HELP
rom upgrade on locked sim?
just wanted to ask if one can upgrade the htc universal to wm6 even though it's locked on orange sims.
Thanks
Welcome to forums
More than one can upgrade ROM
Just be sure to read the Wiki instructions
Good luck,
Related
Hi all, am a noob to this and have dloaded and tried several roms here but got nowhere.
I have an orange SPVM2000 running WM2003
my PC is running Vista Premium ( so no active sync as such)
and i have a dock station
alot of the roms require to put the update to SD then boot to Bootloader and run, but i cannot do this as when it is in cradle i have no access to reset button and if i goto bootloader first then put back on dock the PC will not read the device.
I AM WELL LOST.
please could some one reply with a dummys guide please?
i have read as many tips guides and stickys and still lost.
I do not care if i upgrade to WM 5 or 6 but woud prefer 6
THANKS!!
for BA particularly, you will flash direct from your computer.
I dont know whether your Vista is compatible with the flashing software, but XP surely does.
Do further reading, I am sure u will understand what I mean.
And a comment for the bootloader problem: first you put the device in bootloader mode, then you put it back in the cradle. Simple as that.
ALL DONE
All sorted cheers, WM6 up and running, i did a bit of fiddlin and away i was, no need for bootloader as it did it itself, it would not use vista so i use xp with active sync. cheers all
hi all and artemis experts..
i have a p3300 ( spv m650) phone is dead.. not power on.. only goes to bootloader mode..when i try to upgrade it gives error on percent 3..
what can be problem..? what is the mistake..? whan is the way for upgrading htc artemis..?
thanx alot...
nobody has any idea..?
still i m waiting...
Hi,
i've got the same problem error 270.. Did you find a sollution?
i have this message too , i'm tired of searching a solution !
U should flash your devices official rom.
How to flash back to the original ROM?
I have the solution.
Are you using Windows Vista or XP. In Vista, there are problems while upgrading rom. When I was trying to upgrade the Rom in Windows Vista, It stopped the the upgrading at 3%, but then I read a post and thought to upgrade in Windows XP. It was alright.
The thing left is that your mobile does not switches on, you can see this post.
http://forum.xda-developers.com/showthread.php?t=311403
The above one is to install the Uspl.
http://forum.xda-developers.com/showthread.php?t=306904
And this one is for your bricked device.
As your device is bricked s you should enter the bootloader by pressing the Voice Speed Dial Button and soft Reset and dont forget to do this in Windows XP.
Hope this Helps you.
Thanks,
Talha Qasim
To flash to the original WM5 Rom, Download this Rom from rapidshare.com
http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dont forget to install the USPL through this thread:
http://forum.xda-developers.com/showthread.php?t=311403
And this also that you are using Windows XP.
Thanks,
Talha
To install the original WM5 Rom, Download this Rom:
http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dont forget to install the USPL through this thread:
http://forum.xda-developers.com/showthread.php?t=311403
And this also that you are using Windows XP.
Thanks,
Talha
I have a problem with my I-Mate JAM, It loads the OS.. but after everything Installs it converts to the BootLoader screen, and remains unuseable.
If I rest the phone, it loads straight to the Bootloader screen, but if I take off the Battery cover, leave it for a few seconds, then replace it and turn the phone on... It will load the OS setup again, but go back to the BootLoader.
So how can I fix this, and what must I do? Please help me ASAP. The Rom/OS is Windows 2003 SE.
Thanks
Sikuri
try flashing the ROM to a latest windows mobile, i encountered this problem on my HTC Magician, i downloaded the compatible and latest windows mobile for my phone extracted the files on my PC and while my phone is in boot loader mode i connect the USB to pc cable (you'll notice the serial changing to USB) after that i run the update.exe on the files i extracted and just follow instructions on the updater. And now my phone is fix. Hey im not an expert on this, I got thru it by reading the forums here, and there are more experienced experts in here that you can ask. Hope this helps and give you an idea. By the way run the update.exe on a Windows XP machine for it to work perfectly.
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken